ASTM F626 is a standard specification for fence fittings.
This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services.
ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services. Some 12,575 ASTM voluntary consensus standards operate globally. The organization's headquarters is in West Conshohocken, Pennsylvania, about 5 mi (8.0 km) northwest of Philadelphia.
This standard was published by ASTM F14.40 which is a committee specializes about on chain link fence and Wire Accessories. This standard deals with the materials, coating requirements, and also inspection of fence accessories for chain-link fence.
These accessories are the following:
- Post and line caps,
- Rail and brace ends,
- Top rail sleeves,
- Tie wires, clips, and fasteners,
- Tension and brace bands,
- Tension bars,
- Truss rod assembly,
- Barbed wire arms,
- Color coating of fittings, and
- Fitting size terminology.
The main keywords to present this standard are fittings, fence; and high security.
Barbed wire, also known as barb wire, occasionally corrupted as bobbed wire or bob wire, is a type of steel fencing wire constructed with sharp edges or points arranged at intervals along the strands. It is used to construct inexpensive fences and is used atop walls surrounding secured property. It is also a major feature of the fortifications in trench warfare.
Rebar, known when massed as reinforcing steel or reinforcement steel, is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has weak tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar's surface is often deformed to promote a better bond with the concrete.
In agriculture, fences are used to keep animals in or out of an area. They can be made from a wide variety of materials, depending on terrain, location and animals to be confined. Most agricultural fencing averages about 4 feet (1.2 m) high, and in some places, the height and construction of fences designed to hold livestock is mandated by law.
ASTM C 1270 is a Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors. This standard was created by the American Standard for Testing and Materials (ASTM) and published in December 1997. ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard deals with a procedure to establish the weakest detection path through the portal aperture and the worst-case orthogonal orientation of metallic test objects. This practice is considered to develop the assistance about operators of walk-through metal detectors with meeting the metal detection performance requirements of the responsible regulatory authority.
ASTM E 2395 is a Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. Through this standard is specified voluntary performance test for the resistance to forced entry of window and door assemblies. This standards deal with the capability of window and door assemblies to prevent entry about intruders. These requirements are only limited to window and door assemblies
ASTM F1450 is a standard test method for hollow metal swinging door assemblies for detention facilities. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was founded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F33, a committee which specializes in detention and correctional facilities. This method dealt with requirements for test to determine the performance characteristics of swinging detention hollow metal door assemblies of various styles and types of construction. The aim is to test the capability to prevent intrusion, avoid unauthorized access and to resist common types of vandalism in an organization. In this regards, ASTM has simulated repeated exertion of tremendous amounts of impact energy against a door in order to break through.
ASTM F1577 is a Standard Test Method for Detention Locks for Swinging Doors. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F33 which is a committee specializes about detention and correctional facilities. FM 33 has published 14 standards in this area. This standard deals with the equipment, procedures, and acceptance conditions for determining the normal operational performance and the performance characteristics under several conditions of locks used in swinging door assemblies into several organizations including detention and correctional institutions. Several features are not considered such as both installation and maintenance conditions.
ASTM F 1592 is a Standard Test Method for Detention Hollow Metal Vision Systems.
ASTM F 1643 is a Standard Test Methods for Detention Sliding Door Locking Device Assembly. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F33 which is a committee specializes about detention and correctional facilities. FM 33 has published 14 standards in this area. The test enables to give information about the performance feature regarding devices in services against assault, smoke, and fire conditions into several organizations including detention and correctional institutions. Several features are not considered such as both installation and maintenance conditions. This test enables to help ensure that detention sliding devices perform against intrusion, avoid that intruders penetrate in unauthorized access and to resist common types of vandalism into an organization.
ASTM is a standard specification for steel chain-link fencing materials used for high security applications. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This was published by ASTM F14 which is a committee specializes about high security fences and perimeter barriers.
ASTM F 1915 is a standard test method for glazing for detention facilities. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F33 which is a committee specializes about detention and correctional facilities. FM 33 has published 14 standards in this area. This standard deals with the equipment, procedures, and acceptance conditions for determining the normal operational performance and the performance characteristics under several conditions of glazing for detention facilities into several organizations including detention and correctional institutions. Several features are not considered such as both installation and maintenance conditions. This test enables to help ensure that glazing used for windows and doors perform against intrusion, avoid that intruders penetrate in unauthorized access and to resist common types of vandalism into an organisation.
ASTM F 2248 is a standard practice for specifying an equivalent 3-Second Duration design loading for blast resistant glazing fabricated with laminated glass. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F14 which is a committee specializes about on systems products and services. The standard explain different methods to check the thickness and type of blast resistant glazing fabricated with laminated glass to glaze a fenestration
ASTM F 2322 is a standard test method for physical assault on vertical fixed barriers for detention and correctional facilities. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F33 which is a committee specializes about detention and correctional facilities. FM 33 has published 14 standards in this area. This test enables to help ensure that physical assault on vertical fixed barriers perform against intrusion, avoid that intruders penetrate in unauthorized access and to resist common types of vandalism into an organization.
ASTM F 2348 is a standard test performance specification for privacy padlocks. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F12.50 which is a committee specializes about locking devices. The standards deal with requirement regarding security for padlocks. This standard involves descriptions, operational tests, forcing tests, and surreptitious entry tests.
ASTM F 571 is a standard practice for installation of exit devices in security areas. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F12.50 which is a committee specializes about locking devices. This standard practice deals with information regarding the installation of exit devices used in areas of security in order to reach the more great security level without violating the requirements of NFPA 101. NFPA is the National Fire Protection Association. In this paper NFPA 101, the NFPA introduce a code writing process and its performance-based activities.
ASTM F 883 is a standard performance specification for padlocks.
Load securing, also known as cargo securing, is the securing of cargo for transportation. According to the European Commission Transportation Department “it has been estimated that up to 25% of accidents involving trucks can be attributable to inadequate cargo securing”. Cargo that is improperly secured can cause severe accidents and lead to the loss of cargo, the loss of lives, the loss of vehicles, unintentional disclosure of a concealment, or cause environmental hazards.
Pressure-sensitive tape, known also in various countries as PSA tape, adhesive tape, self-stick tape, sticky tape, or just tape, is an adhesive tape that will stick with application of pressure, without the need for a solvent or heat for activation. It can be used in the home, office, industry, and institutions for a wide variety of purposes.
