BM-1 | |
---|---|
Role | Mail plane |
National origin | United States |
Manufacturer | Aeromarine |
Designer | Boris v. Korvin-Kroukovsky |
Status | Design stage only |
Number built | none |
The Aeromarine BM-1 was a new mail plane design to meet a request for proposal by the US Postal Service in the 1920s.
Aeromarine developed the AM-1, AM-2, and AM-3 designs in 1923 for an earlier proposal. The BM-1 was a clean-sheet design for the new effort. [1]
The BM-1 was a single place biplane with conventional landing gear and a steerable tail skid. The aircraft used a dropable main fuel tank between the main gear to meet crashworthiness requirements and a small header tank of 10 gallons in the upper wing. Control cables were designed not to use pulleys. The wings had optional metal or wood spars with doped aircraft fabric covering. The fuselage used an all-metal aluminum girder structure with aluminum covering. The horizontal stabilizer used a jack screw for trim adjustment. The engine featured a radiator mounted to the front with a pass-through for the propeller shaft. [1]
The BM-1 did not progress beyond design phase.
Data from Skyways
General characteristics
Performance
Related development
The American Champion 8KCAB Decathlon and Super Decathlon are two-seat fixed conventional gear light airplanes designed for flight training and personal use and capable of sustaining aerobatic stresses between +6g and −5g. The Decathlon entered production in the United States in 1970 as a more powerful and stronger complement to the American Champion Citabria line of aircraft.
The Bede BD-4 is an American light aircraft, designed by Jim Bede for homebuilding and available since 1968. It was the first homebuilt aircraft to be offered in kit form. It remains one of the world's most popular homebuilts with thousands of plans sold and hundreds of examples completed to date.
The Bartel BM 2, originally Bartel M.2 was a Polish biplane primary trainer aircraft prototype of 1926.
The Aeromarine AM-1 was a biplane built to pursue a US Air Mail Service requirement for a nighttime transport.
The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.
The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.
The Hummel H5 is an American amateur-built aircraft, designed by Morry Hummel and produced by Hummel Aviation. The aircraft is supplied as a kit or plans for amateur construction.
The Striplin FLAC is an American flying wing ultralight aircraft that was designed by Ken Striplin in 1977, first flying in October 1978. The aircraft was supplied as a kit for amateur construction.
The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.
The Staib LB-1 Special is a homebuilt aircraft design of Wilbur Staib.
The Aeromarine AMC was the first American all-metal hulled commercial flying boat.
The Aeromarine EO was a light sport flying boat that was built in the mid-1920s.
The Dempsey TD-3 Beta Lightning is the second original homebuilt aeroplane design by Thomas Dempsey.
The Wickham B is an American experimental twin engined, homebuilt aircraft.
The Merkel Mark II is an American homebuilt aerobatic biplane that was designed by Edwin Merkel and produced by the Merkel Airplane Company of Wichita, Kansas in the form of plans for amateur construction.
The Williams W-17 Stinger is an American homebuilt racing aircraft that was designed for Formula One Air Racing by Art Williams and produced by his company, Williams Aircraft Design of Northridge, California, introduced in 1971. The aircraft was at one time available in the form of plans for amateur construction, but only one was ever constructed.
The Rihn DR-109 is an American aerobatic homebuilt aircraft that was designed by Dan Rihn. The aircraft was supplied by Jim Kimball Enterprises of Zellwood, Florida and more recently by Ashcraft Aero Works of Aurora, Illinois in the form of plans. It was designed for competition aerobatics as well as a trainer for the Rihn DR-107 One Design.
The Christavia Mk IV (Christ-in-Aviation) is a Canadian homebuilt aircraft that was designed by Ron Mason and produced by Elmwood Aviation of Frankford, Ontario. The aircraft is supplied in the form of plans for amateur construction.
The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.
The Frontier MD-II was an American homebuilt aircraft that was designed and supplied as a kit by Frontier Aircraft Inc of Vail, Colorado, introduced in the 1990s.
{{cite journal}}
: CS1 maint: untitled periodical (link)