Air Force Combat Action Medal

Last updated
Air Force Combat Action Medal
Air Force Combat Action Medal.png
U.S. Air Force Combat Action Medal
TypeMedal (Service/Achievement) [1]
Awarded forActive participation in ground or air combat [1]
Presented by United States Department of the Air Force [2]
EligibilityAirmen and guardians in the grades of E-1 through O-6
StatusCurrently awarded
Established15 March 2007
First awarded12 June 2007 (retroactive to 11 September 2001)
Total awarded posthumouslyYes
Air Force Combat Action ribbon.svg
Precedence
Next (higher) Service achievement medals [3]
EquivalentNavy and Marine Corps: Navy Combat Action Ribbon
Coast Guard: Coast Guard Combat Action Ribbon
Next (lower) Air Force Presidential Unit Citation [3]
Related Combat Infantryman Badge (U.S. Army Infantry and Special Forces equivalent)
Combat Medical Badge(U.S. Army Medical equivalent)
Combat Action Badge (U.S. Army non Infantry, Special Forces or Medical equivalent)

The Air Force Combat Action Medal (AFCAM) [4] is a decoration of the United States Air Force and United States Space Force to recognize airmen and guardians for active participation in ground or air combat.

Contents

The AFCAM was first awarded on June 12, 2007, to six airmen who were engaged in air or ground combat off base in a combat zone during Operation Enduring Freedom (Afghanistan, October 7, 2001 – December 28, 2015) or Operation Iraqi Freedom (Iraq, March 19, 2003 – September 1, 2010). [5] [6] The medal is retroactive from September 11, 2001 to a date to be determined and may be awarded posthumously.

Criteria

For an airman or guardian to wear the AFCAM, members must provide proper documentation to their commander which includes a narrative explanation of the airman or guardian's involvement in combat activities to the first O-6 (Colonel) in their operational chain of command on an AF Form 3994. [7] The application will be processed through the chain of command and eventually be approved or disapproved by the Commander of Air Force Forces (COMAFFOR). [8]

Nomination of the award of the AFCAM will be restricted to members of the U.S. Armed Forces who on or after September 11, 2001, were under any of the following conditions: [9]

Retroactive awards prior to September 11, 2001, are not authorized.

It is worn after the Air Force Achievement Medal and before the Air Force Presidential Unit Citation.

The AFCAM may be awarded to members from the other Armed Forces and foreign military members serving in a U.S. Air Force or U.S. Space Force unit, provided they meet the criteria for the award. [1]

Ribbon devices

According to USAF Memo, June 25, 2015, Air Force Instruction 36–2803, December 18, 2013 (Change 1, June 22, 2015): AFCAM, Authorized Device: A gold star will be worn to recognize subsequent operations when approved by the Chief of Staff of the Air Force (5.3.1.7., pages 148-49). [10] However, in AFI36-2903, gold stars are not included in the AF list of authorized ribbon devices (11.4, page 224); service/campaign stars (316" bronze/silver star) are the only star devices authorized for wear. Also, no ribbon device is authorized for wear in AFI36-2803 to denote subsequent awards of the AFCAM, which normally would be oak leaf clusters. The Navy, Marine Corps, and Coast Guard authorizes a 516" gold star to denote subsequent awards of specific decorations and a 316" bronze service star is worn on the Global War on Terrorism Expeditionary Medal to denote a subsequent operation. [11]

Note: This may be the beginning of a first time wearing of a gold star device by a member of the Air Force on any one of their awards: General Tod Wolters, U.S.A.F., publicly wears a 316" gold star on an AFCAM service ribbon on his uniform since at least September 2013 (the gold star for the AFCAM is not listed on his August 2015 AF biography awards list). [12] [13] Wolters has fought in Operation Enduring Freedom and Operation Iraqi Freedom. [13] [14] [15] However, as of 2019, General Wolters no longer wears the device on the AFCAM ribbon. [16]

Medal design

Billy Mitchell's SPAD XVI he flew in World War I with a Lewis twin machine gun mounted in the rear cockpit. The aircraft is now located at the National Air and Space Museum. Spad XVI.jpg
Billy Mitchell's SPAD XVI he flew in World War I with a Lewis twin machine gun mounted in the rear cockpit. The aircraft is now located at the National Air and Space Museum.

In conjunction with the Army Institute of Heraldry, the medal was designed by Susan Gamble, a professional artist and Master Designer for the U.S. Mint, and wife of Mike Gamble, an Air Force colonel. She was quoted by The Washington Post as saying, "It was just a real pleasure to give this back to the Air Force that's been part of my life." [17]

Gamble based the silver medal's design and ribbon color (scarlet with ten yellow stripes) from the circular insignia [18] painted on planes which were piloted by Brigadier General William "Billy" Mitchell, including a French-built SPAD XVI (SPAD 16) fighter aircraft he piloted in France during World War I. [19] His SPAD 16 (single-engine, two-seat, reconnaissance and bomber aircraft) is currently displayed at the Smithsonian National Air and Space Museum in Washington, D.C. [20] Mitchell is generally known as the father of the U.S. Air Force. [21]

A laurel wreath surrounds the medal's eagle emblem executed in a simple, linear Art Deco style. The eagle with a national flag shield with thirteen perpendicular stripes on its breast faces right, over the right talon clutching arrows (represents the power of war), to reflect that this is a combat medal. The left talon clutches an olive branch (represents the power of peace). The eagle which symbolizes Mitchell's military rank insignia of colonel, [18] has above it a five-pointed star which represents Mitchell's wartime promotion to the temporary rank of brigadier general in October, 1918. The reverse side of the medal contains two rows of words written on a scroll at the center of the eagle, "U.S. Air Force" and "Combat Action".

The ribbon's diagonal stripes at first could not be manufactured in the United States; but military medals cannot be manufactured outside the U.S. This design problem was resolved when a mill in Bally, Pennsylvania, Bally Ribbon Mills, bought a new loom specifically to weave the diagonal stripe. A Rhode Island firm, Ira Green Inc. in Providence, made the metal parts. [17] The AFCAM is the only U.S. military award to have a diagonally patterned ribbon, much like the British Distinguished Flying Cross and Netherlands Airman's Cross. The AFCAM service ribbon has five stripes.

First recipients

First award - June 12, 2007

The AFCAM was presented for the first time to six Airmen (five men and one woman) by the Air Force Chief of Staff, General T. Michael Moseley (now retired), at the U.S. Air Force Memorial in Arlington, Virginia: [5] [17]

Awards (posthumous)

The AFCAM was presented posthumously to:

Forgotten

Six Civil Engineer [Dover AFB Fire Department] airmen arrived at Kandahar IAP in December 2001 and were assigned to the Marine 26th MEU; which included manning the base perimeter [airfield-side] DFPs as base defense personnel. They performed this role for 3–4 weeks during nightly Taliban attacks and until additional staffing and equipment arrived to setup the first combat zone fire department since Vietnam. The AFCAM was created years later and after several of these members retired and/or separated from service. Attempts to correct military records and obtain the award have been unsuccessful.

Related Research Articles

Bronze Star Medal United States Armed Forces decoration award

The Bronze Star Medal (BSM) is a United States Armed Forces decoration awarded to members of the United States Armed Forces for either heroic achievement, heroic service, meritorious achievement, or meritorious service in a combat zone.

The Commendation Medal is a mid-level United States military decoration presented for sustained acts of heroism or meritorious service. Each branch of the United States Armed Forces issues its own version of the Commendation Medal, with a fifth version existing for acts of joint military service performed under the Department of Defense.

The Combat Action Ribbon, is a high precedence United States Navy, United States Coast Guard, and United States Marine Corps military decoration awarded to United States sea service members "who have actively participated in ground or surface combat."

Air Medal Military decoration of the United States Military

The Air Medal (AM) is a military decoration of the United States Armed Forces. It was created in 1942 and is awarded for single acts of heroism or meritorious achievement while participating in aerial flight.

The Achievement Medal is a military decoration of the United States Armed Forces. The Achievement Medal was first proposed as a means to recognize outstanding achievement or meritorious service of military personnel who were not eligible to receive the higher Commendation Medal or the Meritorious Service Medal.

Marksmanship ribbon United States Navy, Air Force, and Coast Guard award

A marksmanship ribbon is a United States Navy, Air Force, and Coast Guard award that is issued to its members who pass a weapons qualification course and achieve an above-average score. Additionally, there are select state National Guard organizations that award marksmanship ribbons for high placement in state-level marksmanship competitions.

The Vietnam Service Medal is a military award of the United States Armed Forces established on 8 July 1965 by order of President Lyndon B. Johnson. The medal is awarded to recognize service during the Vietnam War by all members of the U.S. Armed Forces provided they meet the award requirements.

Combat Readiness Medal Award of the United States Air Force

The Combat Readiness Medal is an award of the United States Air Force created in 1964. The original Combat Readiness Medal was an award senior to the Air Force Commendation Medal, and it was awarded for superior and meritorious duty to the United States Air Force. The award criteria for the medal were revised in 1967 and the Combat Readiness Medal adopted the designation as a service medal.

A "V" device is a metal 14-inch (6.4 mm) capital letter "V" with serifs which, when worn on certain decorations awarded by the United States Armed Forces, distinguishes an award for heroism or valor in combat instead of for meritorious service or achievement.

Service star Military decoration

A service star is a miniature bronze or silver five-pointed star 316 inch in diameter that is authorized to be worn by members of the eight uniformed services of the United States on medals and ribbons to denote an additional award or service period. The service star may also be referred to as a campaign star or battle star depending on which award the star is authorized for and the manner in which the device is used for the award.

Arrowhead device

The Arrowhead device is a miniature bronze arrowhead that may be worn on campaign, expedition, and service medals and ribbons to denote participation in an amphibious assault landing, combat parachute jump, helicopter assault landing, or combat glider landing by a service member of the United States Army or United States Air Force.

The Armed Forces Expeditionary Medal (AFEM) is a military award of the United States Armed Forces, which was first created in 1961 by Executive Order of President John Kennedy. The medal is awarded to members of the U.S. Armed Forces who, after July 1, 1958, participated in U.S. military operations, U.S. operations in direct support of the United Nations, or U.S. operations of assistance for friendly foreign nations.

Fleet Marine Force Combat Operation Insignia

The Fleet Marine Force Combat Operation Insignia is a miniature 516 inch bronze United States Marine Corps emblem that may be authorized by the Secretary of the Navy for wear on specific campaign, expeditionary, and service medal ribbons issued to United States Navy sailors attached to and on duty with Fleet Marine Force (FMF) units during combat operations and sailors on duty with Navy units attached to and operating with Fleet Marine Force units while under Marine Corps operational control during combat operations. The device was instituted in 1953 with the Navy and Marine Corps Award Manual dated 1953.

Iraq Campaign Medal American campaign medal

The Iraq Campaign Medal (ICM) is a military award of the United States Armed Forces which was created by Executive Order 13363 of U.S. President George W. Bush on 29 November 2004, and became available for general distribution in June 2005. The medal was designed by the U.S. Army Institute of Heraldry and was awarded during the Iraq War, from 19 March 2003 to 31 December 2011.

The Global War on Terrorism Expeditionary Medal (GWOT-EM) is a United States Armed Forces award created by George W. Bush on 12 March 2003, through Executive Order 13289. The medal recognizes those military service members who have deployed overseas in direct service to the War on Terror from 11 September 2001 to a date to be determined. Prior to 30 April 2005, the medal was awarded for service within Iraq and Afghanistan, but has been replaced with the Iraq Campaign Medal and Afghanistan Campaign Medal and now serves primarily as recognition for personnel who have deployed in support of the War on Terror to locations beyond Iraq and Afghanistan. In a similar fashion the Inherent Resolve Campaign Medal is now issued instead for service in the fight against ISIS, with eligibility retroactive to 15 June 2014.

The Outstanding Airman of the Year Ribbon is a military award of the United States Air Force which was created on February 21, 1968 by order of Secretary of the Air Force Harold Brown. The first presentation of the award was in June 1970. The Outstanding Airman of the Year Ribbon is the highest personal ribbon award of the United States Air Force.

The NATO Medal is an international military decoration which is awarded to various militaries of the world under the authority of the North Atlantic Treaty Organization (NATO). It is manufactured by Eekelers-Centini Intl, of Hemiksem, Belgium.

The United States Armed Forces authorize certain medal and ribbon devices that may be worn if authorized on a defined set of United States military decorations and awards. The devices vary between 316 inch to 1332 inch in size and are usually attached to suspension and service ribbons of medals and to unit award ribbons. The devices are usually made of brass or metal alloys that appear gold, silver, or bronze in color with either a dull or polished look. The devices may denote additional awards of the same decoration or award, an award for valor or meritorious combat service, participation in a particular campaign, periods of honorable service, specific events, and other special meanings. These are sometimes referred to as award devices, but are most commonly referred to in service regulations and Department of Defense instructions simply as "devices" for awards and decorations.

Uniforms of the United States Air Force Standardized military uniforms worn by airmen of the United States Air Force

The uniforms of the United States Air Force are the standardized military uniforms worn by airmen of the United States Air Force to distinguish themselves from the other services.

The Remote Combat Effects Campaign Medal (RCECM) is a United States Air Force campaign medal established on 22 May 2019. The medal recognizes air force personnel, "in non-deployed status who directly participated in a U.S. Department of Defense (DoD) combat operation from a remote location.

References

  1. 1 2 3 "Air Force Memorandum, AFCAM, pp. 148–49, 25 June 2015, Retrieved April 16, 2016" (PDF). Archived from the original (PDF) on 27 January 2018. Retrieved 17 April 2016.
  2. "Production publication" (PDF). static.e-publishing.af.mil. Archived from the original (PDF) on 2018-01-27. Retrieved 2016-04-17.
  3. 1 2 "Awards and Decorations". Air Force Personnel Center Library. Air Force Personnel Center. Archived from the original on 23 January 2013. Retrieved 14 January 2013.
  4. "Air Force Combat Action Medal, Air Force Personnel Center, posted 4 August 2010, last accessed 18 March 2013". Archived from the original on 16 June 2011. Retrieved 28 May 2011.
  5. 1 2 J oint Base Andrews, airmen receive first AF Combat Action Medals, By the Secretary of the Air Force Office of Public Affairs, 6/12/2007
  6. "Congressional Research Service, U.S. Periods of War and Dates of Recent Conflicts, February 27, 2015" (PDF).
  7. "AF Form 3994". Archived from the original (xld) on 2012-02-08. Retrieved 2012-08-11.[ clarification needed ]
  8. "News". www.af.mil.
  9. "Air Force Memorandum, AFCAM, p. 148-49, 25 June 2015, Retrieved April 16, 2001" (PDF). Archived from the original (PDF) on 27 January 2018. Retrieved 17 April 2016.
  10. "Air Force Memorandum, AFCAM, p. 148-49, 224, 25 June 2015, Retrieved April 16, 2016" (PDF). Archived from the original (PDF) on 27 January 2018. Retrieved 17 April 2016.
  11. www.public.navy.mil http://www.public.navy.mil/bupers-npc/reference/messages/Documents/ALNAVS/ALN2015/ALN15062.txt . Retrieved June 28, 2017.{{cite web}}: Missing or empty |title= (help)
  12. "Lieutenant General Tod Wolters, USAF, saluting on September 24, 2013".
  13. 1 2 "LIEUTENANT GENERAL TOD D. WOLTERS > U.S. Air Force > Biography Display".
  14. "Factsheets : Operation Enduring Freedom".
  15. "Factsheets : Operation Iraqi Freedom".
  16. "Commander".
  17. 1 2 3 "For Today's Air Force, a New Symbol of Valor" by John Kelly, June 13, 2007. The Washington Post, p. B03. Accessed June 13, 2007.
  18. 1 2 "General William Mitchell Biography".
  19. "Billy Mitchell Archives - This Day in Aviation".
  20. Smithsonian National Air and Space Museum, SPAD XVI, Retrieved April 17, 2016
  21. "William 'Billy' Mitchell -- 'The father of the United States Air Force' once liv".
  22. "While you were sleeping . . . Commandos were in action > Air Force Special Operations Command > Display".
  23. "They called her 'The Angel of Death'".

Commons-logo.svg Media related to Air Force Combat action Medal at Wikimedia Commons