Akaflieg Stuttgart fs23

Last updated
Akaflieg Stuttgart fs23
Role Glider aircraft
National origin West Germany
Manufacturer Akaflieg Stuttgart
DesignerR. Eppler & H. Nägele
First flight1 February 1966
Number built1

The Akaflieg Stuttgart fs23, nicknamed Hidalgo (Spanish: "Nobleman"), was a glider aircraft that was designed and built in West Germany from 1953. It was lighter than most contemporaries. Only one example of the design was constructed, which was destroyed in a fatal crash in 1971.

Contents

Development

Design of the fs23 was started in 1953 and took thirteen years, including a hiatus while the fs24 Phönix was developed. The goal of the fs23 designers was a lightweight high-performance glider to meet the proposed 13m mini-standard class for competition gliders. To achieve this goal the students at Akaflieg Stuttgart thoroughly tested fibreglass re-inforced composites, as well as birch ply and balsa/fibreglass sandwiches, for E- and G-modulus, compressive and torsional strength as well as bonding and rivetting methods. Once the testing was complete the aircraft could be designed to ensure adequate strength with light weight, (1/3 to 2/3 the weight of typical gliders of the time), and good aerodynamic qualities, the result being the fs23 Hidalgo.

Built primarily of balsa core sandwiched in fibreglass, the fs23 was a high-wing, high aspect ratio, cantilever monoplane with moderate dihedral and -6o sweep, (to reduce the tail moment required and thus the size and weight of the rear fuselage and tail unit), and a V-tail. A fixed undercarriage and a brake parachute were used. Flight trials began on 1 February 1966 demonstrating that the fs23 had sensitive controls, side-slipped well and gave adequate warning of a stall. It recovered easily from a spin, within half a turn. In 1967 the fs23 suffered severe tail flutter and the pilot was thrown out of the cockpit, descending by parachute, as the aircraft dived towards the ground from 1500 meters altitude. The aircraft landed with minimal damage and was repaired to continue the test programme until July 1971 when the fs23 crashed a second time, with the pilot, Heinz Jahn, losing his life.

Specifications

Data from https://akaflieg-stuttgart.de/en/projects/fs23-hidalgo/

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

Schempp-Hirth Cirrus German single-seat glider, 1967

The Schempp-Hirth Cirrus is an Open Class glider built by Schempp-Hirth between 1967 and 1971 and by VTC until 1977. It was replaced by the Nimbus 2.

Schleicher ASW 12 German glider, 1965

The ASW 12, initially known as the AS 12, is a single-seat Sailplane of glass composite construction. The wing is shoulder mounted and it has a T-tail. It is essentially a developed production version of the Akaflieg Darmstadt D-36.

Akaflieg Stuttgart fs24 German single-seat glider, 1957

The Akaflieg Stuttgart fs24, nicknamed Phönix, was a glider designed and built in West Germany from 1951.

The Akaflieg Stuttgart fs16, nicknamed Wippsterz was a glider aircraft that was designed and built in Germany from 1936. Only one example of the design was constructed.

The Akaflieg Stuttgart fs18a was a glider designed and built in Germany from 1938. It was characterized by a gull wing and was the first glider to have a retractable undercarriage. Only one example of the design was constructed.

Akaflieg Stuttgart fs29 German single-seat glider, 1975

The Akaflieg Stuttgart fs29 TF Stadt Stuttgart is a glider designed and built in Germany from 1972.

Akaflieg Stuttgart fs25 German single-seat glider, 1968

The Akaflieg Stuttgart fs25, nicknamed Cuervo is a glider designed and built in Germany from 1968.

Akaflieg München Mü22 German single-seat glider, 1954

The Akaflieg München Mü22 is a single-seat research glider designed and built in Germany from 1953.

Akaflieg Darmstadt is one of approximately twenty aviation groups attached to German universities. Akaflieg is an abbreviation for Akademische Fliegergruppe, an academic group of students and faculty from a German University.

Akaflieg Stuttgart fs26 German single-seat motor glider, 1970

The Akaflieg Stuttgart fs26 Moseppl is a German single-seat motor glider with twin fins and rudders designed and built by Akaflieg Stuttgart. First flown on the 25 September 1970 it was designed as an experiment and not intended for production.

Akaflieg Darmstadt D-36 Circe German single-seat glider, 1964

The Akaflieg Darmstadt D-36 Circe is a single seat, high performance sailplane designed and built in Germany in the mid-1960s, one of the early "glass ships". It was the winner at the German National Championships in 1964 and came second in the World Championships the following year.

The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.

The Akaflieg Darmstadt D-39 was a single-seat motor glider derived from the D-38 sailplane. Built in Germany in the late 1970s, it was not intended for production and only one was constructed.

Akaflieg Stuttgart fs31 Training sailplane designed and built by the Akaflieg Stuttgart in the 1980s.

The Akaflieg Stuttgart fs31 Ferdinand Porsche is a tandem seat, dual control training glider designed and built in Germany between 1977 and 1981. The aircraft was intended to have high performance, yet to be robust enough for student use. It was not intended for production and remains in service with the Akaflieg after almost 40 years and 7,100 flying hours.

The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.

The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.

The Akaflieg Stuttgart fs28, nicknamed Avispa is a single engine, twin boom pusher configuration light sports and utility aircraft designed at the University of Stuttgart in West Germany in the 1970s. Unusually, it has an inverted V-tail. The sole example remained active as of 2010.

The Akaflieg Braunschweig SB-6 Nixope was an early (1961) GRP high performance single seat glider designed and built in Germany by aeronautical students from Brunswick University. It competed in the 1961 German National gliding competition, coming sixth, and led directly to two further GRP aircraft.

The Bertoni Altinger AB-1 Superalbatros,, is a high-performance sailplane designed and built in Argentina in the 1950s and 1960s.

Akaflieg Stuttgart fs33 Sailplane built by the Akaflieg Stuttgart in the 1990s.

The Akaflieg Stuttgart fs33 Gavilán is a high-performance two-seater class sailplane designed and built by Akaflieg Stuttgart.

References