Alcor C-6-1 Junior

Last updated
C-6-1 Junior
Rolesix passenger airliner
National originUnited States
ManufacturerAlcor Aircraft Co.
Designer Allan Lockheed
First flightMarch 6, 1938
Statusdestroyed June 27, 1938
Number built1

The Alcor Junior was a small, six passenger, twin-engined airliner built in the U.S. and flown in 1938. As on Alcor's earlier Duo-4 and Duo-6, its inline engines were mounted horizontally to minimize their separation and drag. Only one was built; it was lost in a crash less than four months after its first flight.

Contents

Design and development

The C-6-1 was a low wing airliner of mixed wood and metal construction. Its wings were tapered in plan, ending in semi-elliptical tips, and were built around twin spars. Its ribs were steel tube girder structures in inner, high stress regions around engine and undercarriage attachment points but were spruce girders elsewhere. Wing covering was largely plywood, except close to fuel tanks where duralumin was used. The trailing edges carried hydraulically operated flaps and Frise ailerons. [1]

Though in the high wing Duo-4 and -6 the engines were mounted on the sides of the forward fuselage, the low wing of the C-6-1 enabled their attachment, cylinder heads together, to the forward wing spars, with steel trusses distributing loads to the rear spars. Their cowlings formed a local, inner extension of the leading edges. The engines were 250 hp (190 kW), air-cooled, supercharged, straight-six Menasco C-6S Super-Buccaneers. Their positioning brought the propeller tips to within 18 in (460 mm). [1]

The forward fuselage, which included the engine and wing mountings, had a steel tube frame and was skinned with light alloy. Behind the cockpit the fuselage became a semi-monocoque wooden structure, with spruce frames and longerons under pressure-formed two-ply shell. The cockpit had seating for two with dual controls and the passenger cabin behind had three rows of seats in pairs either side of a central aisle. At the rear of the cabin there was a toilet and a baggage compartment with a radio cabin behind it. [1]

The C-6-1 had a conventional cantilever tail formed from plywood over wood frames. The horizontal tail, mounted on the top of the fuselage, was narrow and straight-edged but the vertical tail was much broader and curved, its dorsal fin rising slowly from the fuselage. Control surfaces were balanced and fitted with trim tabs. [1] [2]

Its main landing gear was retractable, with oleo legs retracting rearwards and rotating axially through 90° so the wheels, equipped with brakes, lay flat in the wings. The faired, oleo-legged tailwheel did not retract but lockably swivelled for ground manoeuvres. [1]

The first flight of the C-6-1 was made on March 6, 1938 and a brief development program showed good handling. However, during a test flight on June 27, 1938 the pilot initiated a high speed dive, not part of the flight program, from which he could not recover. The two crew escaped by parachute over San Francisco Bay, but the financial consequences ended Alcor Aircraft. [2]

Specifications

Data from Jane's All the World's Aircraft 1938 [1]

General characteristics

Performance

Related Research Articles

Bloch MB.160

The Bloch MB.160 was a fourteen-seat French airliner intended for use in the French African colonies. Three were built and two entered service with Régie Air-Afrique at the start of World War II. Developments included the Bloch MB.162 bomber which was too late for service and the Sud-Est SE.161 Languedoc, one hundred of which were built post-war.

The Lemberger LD20b was a single-engine cantilever biplane designed to be easily towable behind a car. Built in Germany in 1971, it made several flights but did not enter production.

Timm T-840

The Timm T-840 was a twin engine, high wing passenger aircraft designed and flown in the United States in 1938. Equipped with a tricycle undercarriage and low speed aerodynamic devices, it could be configured to carry between six and ten passengers. Only one was built.

SAIMAN LB.2

The SAIMAN LB.2 was an unconventional Italian two seat cabin side by side sport aircraft designed around 1937, with a single pusher configuration engine, twin tail booms and an early tricycle undercarriage.

Potez XVIII

The Potez XVIII was a French airliner from the early 1920s, a three-engine biplane carrying up to twelve passengers.

The Caudron C.580 was a French advanced trainer aircraft intended to prepare pilots for the new low wing monoplane fighters of the mid-1930s. It did not go into production and only two were built.

The Caudron C.570 was a French twin-engine aircraft designed and built by Caudron in the mid-1930s. It was designed to function in multiple roles; as a bomber, passenger transport, paratroop aircraft, cargo aircraft and air ambulance.

The SEA.1 was a Belgian, multi-purpose, light twin engine monoplane flown in 1936. Only one was built; it was later converted into a single engine aircraft and used by the military.

The Lambert Twin Monocoach was a light, twin-engined U.S. aircraft, designed to carry three or four passengers. Initially it was fitted with economical, low-powered engines but even given a large increase of power it failed to attract customers.

Aeroneer 1-B

The Aeroneer 1-B is an all-metal light aircraft built in the United States in 1936. It did not reach production, despite an attempt to interest the USAAC in it as a trainer, but it appeared in three Hollywood films.

The Caudron C.860 was a single engine, single seat monoplane ordered by the French government as a long distance communications aircraft. First flown in 1938, it was also expected to set speed and altitude records but the outbreak of World War II ended developments.

Udet U 8

The parasol wing, single engine Udet U 8, sometimes referred to as the Limousine, was a three-seat commercial passenger transport designed and built in Germany in 1924. Five were produced and were used by German airlines until about 1928.

SABCA Demonty-Poncelet limousine

The SABCA Demonty-Poncelet monoplane, Demonty-Poncelet limousine or SABCA-DP was a Belgian light aircraft first flown in 1924. It had two comfortable side-by side seats in a glazed cabin. Though it had competition successes in 1924 and 1925, it did not go into production.

G.A.C. 102 Aristocrat

The G.A.C. 102 Aristocrat or General 102 Aristocrat is a single-engined cabin monoplane built in the US just before the Great Depression. It proved popular, with over forty built; an early example was taken on an aerial survey of Antarctica. One survives.

Albert A-20

The Albert A-20 was a French twin-engined monoplane designed for postal work in 1929. Only one was built.

McMullen Mac Airliner

The McMullen Mac Airliner was a late 1920s American light airliner powered by a Liberty L-12 V-12 engine of World War I origin. The sole prototype was destroyed in a hangar fire.

Ogden Osprey

The Ogden Osprey was a three engine, high wing monoplane airliner which seated six. Designed in the United States and first flown in the spring of 1930 or earlier, six were built and some used commercially before Ogden Aeronautical ceased trading in the Great Depression.

The Nicholson Junior KN-2 was a low power, high wing, two seat, cabin monoplane intended for sport or flight training in the United States in the late 1920s. Only one was built.

Alcor Duo

The Alcor Duo-4 was a high wing cabin aircraft, unusually powered by a pair of four cylinder straight engines mounted horizontally either side of the nose. After an accident it was rebuilt with six cylinder engines, becoming the Alcor Duo-6. The name Alcor derived from Allan Lockheed Corporation.

Argonaut Pirate

The Argonaut Pirate was a 1930s, U.S., three place, single-engined pusher configuration amphibious aircraft. Only two were built.

References

  1. 1 2 3 4 5 6 Grey, C.G. (1972). Jane's All the World's Aircraft 1938. London: David & Charles. p. 244c. ISBN   0715 35734 4.
  2. 1 2 William Pearce (18 October 2013). "Old Machine Press - Alcor Duo-4, Duo-6, and C-6-1 Transports" . Retrieved 18 September 2020.