Antonov A-2

Last updated
A-2
RoleTraining glider
National originUSSR
Designer Oleg Konstantinovich Antonov
First flight1936
Number builtca. 2,300

The Antonov A-2 and related designs were a family of two-seat training gliders produced in the Soviet Union in the 1930s and 1940s, all derived from the single-seat Antonov A-1 family. [1] They were produced in large numbers, with at least 2,300 built by 1937, and together with the single-seaters, production exceeded 7,600 by the same year. [2]

Contents

Like the A-1, the A-2 was a minimalist primary glider, with a conventional tail mounted on a boom and a strut-braced monoplane wing, mounted parasol-fashion. However, while the single-seat primary gliders featured wings of constant chord, the two-seaters used the longer-span, tapered wings that had been developed for the soaring versions of the single-seat family (P-s1 and P-s2). [3] The other major difference was the design of the cockpit gondola. The single-seaters featured an aerodynamic fairing that slid on and off to provide access to the pilot's seat. [4] The two-seaters, however, had a permanently fixed cockpit pod that seated the pilot and instructor in tandem, open cockpits, each with a small windscreen The rear cockpit was located directly beneath the wing and was accessed via a door on the port side of the gondola. [3] Apart from the change in gondola, all other components remained interchangeable with the Ps-2 [5]

Variants

In each case, the "s" stands for serii (серии – "series")

Uchebnyi (Учебный – "Trainer")


Specifications (U-s5)

Data from Shushurin 1938, 67

General characteristics

Performance

Notes

  1. Sheremetev 1959, 44
  2. Krasil'shchikov 1991, 143
  3. 1 2 Sheremetev 1959, 45
  4. Sheremetev 1959, 40
  5. Shushurin 1938, 67

Related Research Articles

Piper PA-25 Pawnee

The PA-25 Pawnee was an agricultural aircraft produced by Piper Aircraft between 1959 and 1981. It remains a widely used aircraft in agricultural spraying and is also used as a tow plane, or tug, for launching gliders or for towing banners. In 1988 the design rights and support responsibility were sold to Latino Americana de Aviación of Argentina.

Gribovsky G-11 airlift glider by Gribovsky

The Gribovsky G-11 was a Soviet light troop/cargo military glider of World War II.

Antonov A-7 assault glider by Antonov

The Antonov A-7 was a Soviet light troop military glider of World War II.

Bohemia B.5 aircraft

The Bohemia B.5 was a single engined, two seat, light sport aircraft designed and built in Czechoslovakia shortly after World War I.

Schweizer SGU 2-22

The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.

The Sheremetev Sh-5 was a two-seat sailplane designed by Boris Nikolayevich Sheremetev and produced in the Soviet Union in the 1930s. It was an unorthodox design, with a pod-and-boom layout and a cruciform tail that had its horizontal stabiliser mounted atop the boom with a large ventral fin extending below it. The monoplane wing was mounted high, on a pylon above the fuselage pod, and braced to the fuselage with V-struts. Two open cockpits were provided in tandem, with the rear cockpit located beneath the wing. The landing gear consisted of a single sprung skid under the fuselage and a small tailwheel on the ventral fin.

Antonov A-1 1930s training glider family by Antonov

The Antonov A-1 and related designs were a family of single-seat training gliders produced in the Soviet Union in the 1930s and 1940s. All were derived from the Standard-2 (Стандарт-2), which in turn was derived from the Standard-1. They were produced in large numbers, with around 5,400 built of the U-s3, U-s4 and P-s2 major versions alone. The same design formed the basis for the Antonov A-2 and its related group of two-seat designs. Altogether, including the two-seaters, production exceeded 7,600 by 1937.

The de Havilland DH.52 was a single-seat, high-winged glider produced as an entrant to a 1922 prize competition. Two were built but insufficient torsional stiffness in the wings led to control problems and the DH.52 was rapidly abandoned.

IS-3 ABC training glider

The IS-3 ABC was a single-seat training glider designed and built in Poland from 1947.

Akaflieg München Mü10 Milan glider

The Akaflieg München Mü10 Milan is a two-seat glider aircraft that was designed in Germany in 1934. Only one copy of the design was built.

Horten H.III

The Horten H.III was a flying wing sailplane built by Walter and Reimar Horten in Germany from 1937 to 1944.

Akaflieg Stuttgart fs31 Training sailplane designed and built by the Akaflieg Stuttgart in the 1980s.

The Akaflieg Stuttgart fs31 Ferdinand Porsche is a tandem seat, dual control training glider designed and built in Germany between 1977 and 1981. The aircraft was intended to have high performance, yet to be robust enough for student use. It was not intended for production and remains in service with the Akaflieg after almost 40 years and 7,100 flying hours.

The CVV 2 Asiago is a simple, single seat glider designed and built in Italy in the mid-1930s, the second of a series of gliders from the Milan Polytechnic and the first go into production.

The PowerTrike Light is a German ultralight trike and powered parachute, designed and produced by PowerTrike of Mackenbach. The aircraft is supplied as a complete ready-to-fly-aircraft.

The Silent Family Silent Glider M is a German ultralight trike motor glider, designed by Helmut Grossklaus and produced by Silent Family of Westerrade. The aircraft is supplied as a complete ready-to-fly-aircraft.

The Teichfuss LT.12 Biposto was an Italian tandem seat primary glider designed by Luigi Teichfuss and flown in 1933.

The Teichfuss Sparviero was an Italian single seat aerobatic glider, designed by Luigi Teichfuss and flown in 1938.

The Civil Aviation Department Ashvini was the first two-seat glider designed and built in India. It was produced in small numbers in the early 1960s.

PWS-101 high performance Polish glider

The PWS-101 was a high performance Polish glider first flown in 1937. One made the longest distance glider flight in Europe in 1938, gathering prizes for aircraft and pilot.

Rubik R-11b Cimbora

The Rubik R-11b Cimbora (Pal) was a Hungarian two seat glider, first flown in 1940 and intended to introduce B-certificated pilots to aero-towing techniques. It proved popular and was also used to train pilots in ridge lift flying and set several national duration records.

References