MT-03 | |
---|---|
AutoGyro MT-03 | |
Role | Autogyro |
National origin | Germany |
Manufacturer | AutoGyro GmbH |
Status | In production (MTOsport, 2012) |
Variants | RotorSport UK MT-03 |
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft. [1]
The MT-03 was approved in the United Kingdom in 2007 in a modified form as the RotorSport UK MT-03. [2]
The MT-03 features a single main rotor, a two-seats in tandem open cockpit with an optional partial cockpit fairing, tricycle landing gear with wheel pants and a four-cylinder, air and liquid-cooled, four-stroke, dual-ignition 100 hp (75 kW) Rotax 912 engine or turbocharged 115 hp (86 kW) Rotax 914 engine in pusher configuration. [1]
The aircraft fairing is made from composites. Its 8.4 m (27.6 ft) diameter rotor has a chord of 20 cm (7.9 in). The aircraft has an empty weight of 245 kg (540 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 205 kg (452 lb). [1]
The MT-03 was developed into the MTOsport and the fully enclosed AutoGyro Calidus. [1]
The MT-03 was flown on a world record-setting distance flight in Australia of 1,263 km (785 mi). [1]
An AutoGyro MT-03 was used by Norman Surplus in his nine-year global circumnavigation that ended in 2019; the first to be done in an autogyro. [3]
Data from Bayerl [1] and Duda [6]
General characteristics
Performance
The Layzell Cricket is a single-seat autogyro produced in the United Kingdom for homebuilding, although it was first produced in the early 1970s fully factory-built. It was a typically minimalist design, featuring a pilot's seat semi-enclosed within a fairing, and a pusher engine and large tailfin located aft of the rotor mast. Forty-three of the original Crickets were built by Campbell Aircraft, with the type enjoying a brief revival in 2001 when it was marketed in kit form by Mike Concannon of Cricket Gyroplanes, before reaching production again in 2005 by Layzell Gyroplanes as the Mk.6.
The RotorSport UK MT-03 is a two-seat autogyro manufactured to British Civil Airworthiness Requirements CAP643 Section T. New build-aircraft based on the AutoGyro MT-03 design are imported from Germany and completed to British regulations by RotorSport UK Limited in the United Kingdom.
The Magni M-16 Tandem Trainer is an Italian sport autogyro, seating two in tandem, designed and produced by Magni Gyro srl of Besnate. It and the M-22 Voyager, a touring variant with baggage space and increased endurance, remain in production in 2010 with over 150 sold.
The RotorSport Calidus is a German tandem two-seater autogyro modified in the UK to meet British Civil Airworthiness Requirements CAP643 Section T. The Calidus is an enclosed-cockpit development of the open-cockpit RotorSport UK MT-03. New-build AutoGyro Calidus aircraft are imported from the manufacturers, AutoGyro GmbH in Hildeshem, Germany and completed to British regulations by RotorSport UK Ltd.
The AutoGyro Calidus is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Sport Copter Lightning is an American autogyro, designed and produced by Sport Copter of Scappoose, Oregon. The aircraft is supplied as a kit for amateur construction.
The Celier Kiss is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Jaktorów-Kolonia, Poland. When it was available the aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Celier Xenon 2 is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Piotrków Trybunalski, Poland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Autogyro Cavalon is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. It was introduced at the 2011 Aero show in Friedrichshafen. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Air Command Tandem is an American autogyro designed and produced by Air Command International of Caddo Mills, Texas. The aircraft is supplied as a kit for amateur construction or as a ready-to-fly aircraft.
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.
The Airbet Girabet is a family of Spanish autogyros, designed and produced by Airbet of Barcelona. They are all supplied as complete ready-to-fly-aircraft.
The Bauer BAD-12 Gyrotrainer is a Czech autogyro, designed and produced by Bauer Avion of Prague. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Layzell Merlin is a British autogyro that was designed by Scottish designer Jim Montgomery and produced by Layzell Gyroplanes of Quedgeley, Gloucester. The aircraft was supplied as a kit for amateur construction.
The Magni M-14 Scout is an Italian autogyro, designed and produced by Magni Gyro srl of Besnate. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Magni M-18 Spartan is an Italian autogyro, that was designed and produced by Magni Gyro srl of Besnate. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft
The Midwest Hornet is an American autogyro that was designed by Don Shoebridge and made available by Midwest Engineering & Design in the form of free plans for amateur construction.
The Pagotto Brakogyro is a series of Italian autogyros, designed by Enio Pagotto and produced by Carpenterie Pagotto of Pianzano. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.