The Layzell Cricket is a single-seat autogyro produced in the United Kingdom for homebuilding, although it was first produced in the early 1970s fully factory-built. It was a typically minimalist design, featuring a pilot's seat semi-enclosed within a fairing, and a pusher engine and large tailfin located aft of the rotor mast. Forty-three of the original Crickets were built by Campbell Aircraft, with the type enjoying a brief revival in 2001 when it was marketed in kit form by Mike Concannon of Cricket Gyroplanes, before reaching production again in 2005 by Layzell Gyroplanes as the Mk.6.
The RotorSport UK MT-03 is a two-seat autogyro manufactured to British Civil Airworthiness Requirements CAP643 Section T. New build-aircraft based on the AutoGyro MT-03 design are imported from Germany and completed to British regulations by RotorSport UK Limited in the United Kingdom.
The RotorSport Calidus is a German tandem two-seater autogyro modified in the UK to meet British Civil Airworthiness Requirements CAP643 Section T. The Calidus is an enclosed-cockpit development of the open-cockpit RotorSport UK MT-03. New-build AutoGyro Calidus aircraft are imported from the manufacturers, AutoGyro GmbH in Hildeshem, Germany and completed to British regulations by RotorSport UK Ltd.
The Celier Xenon 2 is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Piotrków Trybunalski, Poland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Autogyro Cavalon is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. It was introduced at the 2011 Aero show in Friedrichshafen. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Air Command Commander Elite is an American autogyro that was designed and produced by Air Command International of Caddo Mills, Texas. When it was available the aircraft was supplied as a kit for amateur construction or as a conversion kit for the earlier Air Command Commander.
The Air Command Tandem is an American autogyro designed and produced by Air Command International of Caddo Mills, Texas. The aircraft is supplied as a kit for amateur construction or as a ready-to-fly aircraft.
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Butterfly Monarch is an American autogyro, designed and produced by The Butterfly LLC of Aurora, Texas. The aircraft is supplied as a kit for amateur construction.
The GyroTec DF02 is a German autogyro, designed and produced by GyroTec Michael Obermaier of Wörth am Rhein. The DF02 is supplied as complete ready-to-fly-aircraft.
The Layzell Merlin is a British autogyro that was designed by Scottish designer Jim Montgomery and produced by Layzell Gyroplanes of Quedgeley, Gloucester. The aircraft was supplied as a kit for amateur construction.
The Magni M-14 Scout is an Italian autogyro, designed and produced by Magni Gyro srl of Besnate. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Magni M-18 Spartan is an Italian autogyro, that was designed and produced by Magni Gyro srl of Besnate. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft
The Midwest Hornet is an American autogyro that was designed by Don Shoebridge and made available by Midwest Engineering & Design in the form of free plans for amateur construction.
The North American Rotorwerks Pitbull II is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Niki Lightning is a fully enclosed two-seater tricycle autogyro of composite construction, designed and built by Niki Rotor Aviation in Bulgaria. It was introduced in 2009
The Apollo Gyro AG1 is a Hungarian autogyro produced by Apollo Ultralight Aircraft of Eger and introduced in 2012. The aircraft is supplied ready-to-fly.
The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.
