Aviamilano CPV1

Last updated
Aviamilano CPV1
RoleCompetition sailplane
National origin Italy
Manufacturer Aviamilano Construzioni Aeronautitche
DesignerAmletto Zaneti and Mario Vietri
First flight1963
Number built1

The Aviomilano CPV1, also known as the Arlecchino (English: Harlequin), was an Italian high performance sailplane built in the early 1960s. Only one was built.

Contents

Design and development

The joint designers and builders of the CPV1 were a glider pilot, Amletto Zaneti and the owner of Aviamilano, Mario Vietri. The design emphasised high performance in both weak and strong thermals. [1] It was built at the Polytechnic University of Milan's Centre for Flight (Italian : Centro Politecnico del Volo (CPV)), hence its name. [2]

Structurally the CPV1 was a wooden aircraft, covered in a mixture of plywood and fabric. It had a long span, high aspect ratio, cantilever wing, which was straight tapered and had squared tipss. It was built around a single main spar, with ply covering forward of it to and around the leading edge forming a torsion resistant D-box. Aft of the spar the wing was fabric covered. Inboard of long ailerons, which occupied about half the span, there were Fowler flaps and also mid chord spoilers. The wing carried some dihedral and was attached to the fuselage at the shoulder wing position. [1] [3]

The CPV1 had an ovoid cross-section, plywood skinned fuselage. A long, single seat cockpit with a two piece canopy following the fuselage contours was placed ahead of the leading edge. Under it a landing skid reached aft to a retractable single wheel, fitted with a brake, under the forward wing. The fuselage tapered rearwards to a straight tapered tail with fabric covered control surfaces. The fin and rudder were tall, the rudder reaching down to the keel. The tailplane and elevators were at the top of the fuselage, far enough forward not to overlap with the rudder. [1]

The sole CPV1 first flew in 1963. [1] [2]

Specifications

Data from Jane's All the World's Aircraft 1966-67 p.394 [3]

General characteristics

Performance


Related Research Articles

The Bréguet Br 900 Louisette was a short-span, single-seat competition sailplane built in France in the 1940s. It set some French gliding records but was unsuccessful at the international level. Only six production aircraft were built.

<span class="mw-page-title-main">Maeda 703</span> Type of aircraft

The Maeda 703 was one of the first indigenous Japanese gliders, a high performance single seat aircraft which first flew in 1940. Three were built, two with gull wing wings; one of these set a national endurance record in 1941.

The CVV1 Pinguino was a single seat, high performance glider designed and built in Italy in the mid-1930s, the first of a series of gliders from the Milan Polytechnic. It did not go into production.

The CVV 2 Asiago is a simple, single seat glider designed and built in Italy in the mid-1930s, the second of a series of gliders from the Milan Polytechnic and the first go into production.

The CVV 7 Pinocchio was a single seat competition glider designed and built in Italy, first flown in 1952 though designed in 1940. Only one was built.

The Aeronautica Lombarda AL-3 was an Italian sailplane, designed and built in 1939 to take part in the Olympic sailplane competition. It did so but was not successful.

The Bonomi BS.4 Basettino was a primary glider designed and built in Italy in the 1930s.

The Bonomi BS.18 Airone was a single seat training glider, designed in Italy in 1936. Only one was built.

The Bonomi BS.28 Alcione, sometimes known as the Lombarda BS.28 Alcione, was a single seat competition sailplane designed and built in Italy in 1937-8. About four were completed, with two more or less refined fuselages.

<span class="mw-page-title-main">Aviamilano A2</span> Type of aircraft

The Aviamilano A2 or A2 Standard is an Italian high performance Standard Class sailplane first flown in 1964 and returned to production in 1966.

The Tedeschi E.T.186 was a simple, single seat training glider built in Italy and first flown in 1947. Only one was constructed.

The Romeo Ro.35, a.k.a.IMAM Ro.35 was a single-seat glider built in Italy in 1933.

The CVT1 Zigilo was a single-seat, 12-metre-span (39 ft) Italian training glider designed and built in Italy in the 1950s. Only one was completed.

The Teichfuss Grifo was an Italian training glider designed by Luigi Teichfuss and flown in 1934. It was built in small numbers.

The CAT 28BP was an Italian development of the licence built Dittmar Condor II into a high performance tandem two seat glider. Built in 1938, it anticipated the post-war, two seat Dittmar Condor IV and held the Italian national distance record for many years.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

The IIL IS-10 was a high-performance, single-seat glider, designed and built in Romania in the early 1960s. It was the first Romanian aircraft to use laminar flow airfoils.

The IIL IS-11 was an aerobatic, single seat glider, designed and built in Romania in 1959. It was built in small numbers.

The IFIL-Reghin RG-5 Pescăruș or CIL Reghin RG-5 Pescăruș was a Romanian single seat sailplane built in the 1950s. Twenty six were constructed for gliding clubs.

<span class="mw-page-title-main">DFS Sperber Junior</span> German single-seat glider, 1936

The DFS Sperber Junior was a competition sailplane designed for Hanna Reitsch and built in Germany in 1936.

References

  1. 1 2 3 4 5 6 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 226–7. ISBN   9783980883894.
  2. 1 2 "CVP1 Arlecchino" . Retrieved 26 October 2013.
  3. 1 2 Taylor, John W R (1966). Jane's All the World's Aircraft 1966-67. London: Sampson Low, Marston & Co. Ltd. p. 395.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.