Bachi

Last updated • 2 min readFrom Wikipedia, The Free Encyclopedia

Bachi ( , ; also batchi) are straight wooden sticks used on Japanese taiko drums, and also the plectrum (written ) for stringed instruments of Japanese origin such as the shamisen and biwa .

Contents

For percussion

Bachi for taiko drums Taikos bachi.jpg
Bachi for taiko drums

Drum bachi (, ) are made in a wide variety of sizes and materials, as appropriate to the drum it will be used to play. A typical bachi is about 22 mm (7/8 inches) in diameter, 400 mm (16 inches) long and made out of a hardwood such as oak. These would be suitable for a wide variety of playing styles.

A bachi for playing a larger drum like the O-daiko would be bigger both in circumference and length. Similarly, smaller bachi are used for smaller drums.

Distinctions between the characters and are not always made in technical terms, but can also literally refer to the white oak tree, or Quercus. Some other woods commonly used to make bachi are (Japanese names in parentheses): maple (, kaede), pine (, matsu), cypress (, hinoki), magnolia (, ), beech (, buna) and bamboo (, take). [1] Magnolia is one of the lightest and softest woods, most suitable for playing smaller drums with a sharp attack and less decay. On a larger drum, however, a magnolia bachi usually sounds "slappy" and flat, because it is too light to strike the thicker head of the drum with enough power to generate the lower tones of the drum. It is also too soft to strike the rim of the drum (in kuchi shoka, it is called a ka) without denting the wood. Cypress is slightly harder than magnolia, and is usually cheaper as well. On the opposite extreme, an evergreen oak (, kashi) bachi is heavy and hard. It brings out a better, fuller sound when playing larger taiko, but it muffles the higher harmonics of smaller taiko, sounding "thunky" and dead.

Taiko drumming is a highly visual art form, and so bachi are sometimes decorated with bells or tassels for use during performance.

For stringed instruments

Bachi for string instruments Bachi compare.JPG
Bachi for string instruments

Bachi used for stringed instruments () are actually picks. They are very distinct in form and use from Western-style picks, which are usually smaller in order to be held between or mounted to fingers. In shape, bachi are similar to an ice scraper or a putty knife.

Bachi can be made of various materials and with varying levels of strength. Similarly to guitar picks, bachi were traditionally made of tortoise shell (鼈甲, bekkō) or ivory (象牙, zōge), but these materials are rare and expensive (and illegal to trade in some territories, due to protection of endangered species), therefore making bachi in these materials highly expensive and impractical. Modern and more affordable variants are often made of acrylic, plastic or wood.

Generally, bachi made of softer, more flexible materials are easier to play with for beginners, but harder materials produce a stronger sound and last longer.

Related Research Articles

<i>Taiko</i> Japanese percussion instruments

Taiko are a broad range of Japanese percussion instruments. In Japanese, the term taiko refers to any kind of drum, but outside Japan, it is used specifically to refer to any of the various Japanese drums called wadaiko and to the form of ensemble taiko drumming more specifically called kumi-daiko. The process of constructing taiko varies between manufacturers, and the preparation of both the drum body and skin can take several years depending on the method.

<span class="mw-page-title-main">Double bass</span> Bowed string instrument

The double bass, also known as the upright bass, the acoustic bass, or simply the bass, is the largest and lowest-pitched chordophone, in the modern symphony orchestra. Similar in structure to the cello, it has four or five strings.

<span class="mw-page-title-main">Electric guitar</span> Electrical string musical instrument

An electric guitar is a guitar that requires external amplification in order to be heard at typical performance volumes, unlike a standard acoustic guitar. It uses one or more pickups to convert the vibration of its strings into electrical signals, which ultimately are reproduced as sound by loudspeakers. The sound is sometimes shaped or electronically altered to achieve different timbres or tonal qualities from that of an acoustic guitar via amplifier settings or knobs on the guitar. Often, this is done through the use of effects such as reverb, distortion and "overdrive"; the latter is considered to be a key element of electric blues guitar music and jazz, rock and heavy-metal guitar-playing. Designs also exist combining attributes of the electric and acoustic guitars: the semi-acoustic and acoustic-electric guitars.

<span class="mw-page-title-main">Guitar</span> Fretted string instrument

The guitar is a stringed musical instrument, that is usually fretted and typically has six or twelve strings. It is usually held flat against the player's body and played by strumming or plucking the strings with the dominant hand, while simultaneously pressing selected strings against frets with the fingers of the opposite hand. A guitar pick may also be used to strike the strings. The sound of the guitar is projected either acoustically, by means of a resonant hollow chamber on the guitar, or amplified by an electronic pickup and an amplifier.

<span class="mw-page-title-main">Snare drum</span> Type of percussion instrument

The snare drum is a percussion instrument that produces a sharp staccato sound when the head is struck with a drum stick, due to the use of a series of stiff wires held under tension against the lower skin. Snare drums are often used in orchestras, concert bands, marching bands, parades, drumlines, drum corps, and more. It is one of the central pieces in a drum set, a collection of percussion instruments designed to be played by a seated drummer and used in many genres of music. Because basic rhythms are very easy to learn to play on a snare drum even for children, the instrument is also suitable for the music education for young children and a rhythm band.

<span class="mw-page-title-main">Woodworking</span> Process of making objects from wood

Woodworking is the skill of making items from wood, and includes cabinetry, furniture making, wood carving, joinery, carpentry, and woodturning.

<span class="mw-page-title-main">Arrow</span> Shafted projectile that is shot with a bow

An arrow is a fin-stabilized projectile launched by a bow. A typical arrow usually consists of a long, stiff, straight shaft with a weighty arrowhead attached to the front end, multiple fin-like stabilizers called fletchings mounted near the rear, and a slot at the rear end called a nock for engaging the bowstring. A container or bag carrying additional arrows for convenient reloading is called a quiver.

<span class="mw-page-title-main">Marimba</span> Wooden keyboard percussion instrument

The marimba is a musical instrument in the percussion family that consists of wooden bars that are struck by mallets. Below each bar is a resonator pipe that amplifies particular harmonics of its sound. Compared to the xylophone, the marimba has a lower range. Typically, the bars of a marimba are arranged chromatically, like the keys of a piano. The marimba is a type of idiophone.

<i>Shamisen</i> Japanese plucked stringed instrument

The shamisen, also known as sangen or samisen (all meaning "three strings"), is a three-stringed traditional Japanese musical instrument derived from the Chinese instrument sanxian. It is played with a plectrum called a bachi.

<span class="mw-page-title-main">Guitar pick</span> Small device used in playing guitar

A guitar pick is a plectrum used for guitars. Picks are generally made of one uniform material, such as some kind of plastic, rubber, felt, tortoiseshell, wood, metal, glass, tagua, thermosetting plastic or stone. They are often shaped in an acute isosceles triangle with the two equal corners rounded and the third corner less rounded. They are used to strum chords or to sound individual notes on a guitar.

<span class="mw-page-title-main">Percussion mallet</span> Object used to strike or beat a percussion instrument

A percussion mallet or beater is an object used to strike or beat a percussion instrument in order to produce its sound.

<span class="mw-page-title-main">Window blind</span> Type of window covering

A window blind is a type of window covering. There are many different kinds of window blinds which use a variety of control systems. A typical window blind is made up of several long horizontal or vertical slats of various types of hard material, including wood, plastic or metal which are held together by cords that run through the blind slats. Vertical blinds run along a track system which can tilt open and closed and move side-to-side. Window blinds can be manoeuvred with either a manual or remote control by rotating them from an open position, with slats spaced out, to a closed position where slats overlap and block out most of the light. There are also several types of window coverings, called shades, that use a single piece of soft material instead of slats.

The sanshin is an Okinawan and Amami Islands musical instrument and precursor of the mainland Japanese shamisen. Often likened to a banjo, it consists of a snakeskin-covered body, neck and three strings.

Kuchi shōga (口唱歌), also known as kuchi showa or kuchi shoka, is an educational musical notation for traditional Japanese drums, particularly the taiko and the tsuzumi.

<i>Obi</i> (sash) Belt worn with traditional Japanese clothing and Japanese martial arts uniforms

An obi is a belt of varying size and shape worn with both traditional Japanese clothing and uniforms for Japanese martial arts styles. Originating as a simple thin belt in Heian period Japan, the obi developed over time into a belt with a number of different varieties, with a number of different sizes and proportions, lengths, and methods of tying. The obi, which once did not differ significantly in appearance between men and women, also developed into a greater variety of styles for women than for men.

<span class="mw-page-title-main">Resonator guitar</span> Fretted string instrument modified for loudness

A resonator guitar or resophonic guitar is an acoustic guitar that produces sound by conducting string vibrations through the bridge to one or more spun metal cones (resonators), instead of to the guitar's sounding board (top). Resonator guitars were originally designed to be louder than regular acoustic guitars, which were overwhelmed by horns and percussion instruments in dance orchestras. They became prized for their distinctive tone, and found life with bluegrass music and the blues well after electric amplification solved the problem of inadequate volume.

The kakko is a Japanese double-headed drum. Kakko drums are usually laid sideways on stands, and are played on both drumheads with sticks known as bachi. Kakko drums have been used in taiko ensembles, but are also used in the gagaku form of older Japanese court music.

<span class="mw-page-title-main">Flamenco guitar</span> Acoustic guitar used in Flamenco music

A flamenco guitar is a guitar similar to a classical guitar, but with thinner tops and less internal bracing. It usually has nylon strings, like the classical guitar, but it generally possesses a livelier, more gritty sound compared to the classical guitar. It is used in toque, the guitar-playing part of the art of flamenco.

<span class="mw-page-title-main">Bridge (instrument)</span> Part of a stringed instrument

A bridge is a device that supports the strings on a stringed musical instrument and transmits the vibration of those strings to another structural component of the instrument—typically a soundboard, such as the top of a guitar or violin—which transfers the sound to the surrounding air. Depending on the instrument, the bridge may be made of carved wood, metal or other materials. The bridge supports the strings and holds them over the body of the instrument under tension.

<span class="mw-page-title-main">Music technology (mechanical)</span>

Mechanical music technology is the use of any device, mechanism, machine or tool by a musician or composer to make or perform music; to compose, notate, play back or record songs or pieces; or to analyze or edit music. The earliest known applications of technology to music was prehistoric peoples' use of a tool to hand-drill holes in bones to make simple flutes. Ancient Egyptians developed stringed instruments, such as harps, lyres and lutes, which required making thin strings and some type of peg system for adjusting the pitch of the strings. Ancient Egyptians also used wind instruments such as double clarinets and percussion instruments such as cymbals. In Ancient Greece, instruments included the double-reed aulos and the lyre. Numerous instruments are referred to in the Bible, including the horn, pipe, lyre, harp, and bagpipe. During Biblical times, the cornet, flute, horn, organ, pipe, and trumpet were also used. During the Middle Ages, hand-written music notation was developed to write down the notes of religious Plainchant melodies; this notation enabled the Catholic church to disseminate the same chant melodies across its entire empire.

References

  1. "About Bachi - Taiko Center Co., Ltd". www.taiko-center.co.jp. Retrieved February 9, 2024.