Belliss and Morcom

Last updated

Belliss & Morcom
Type Private
Industry Engineering
PredecessorR. Bach and Co
Founded1852
FounderGeorge Edward Belliss
Joseph J. Seekings
Alfred Morcom
Successor Amalgamated Power Engineering
Headquarters,
Number of locations
Redditch
Area served
Global
Products Reciprocating engine
Reciprocating compressor
Parent Gardner Denver
Website Belliss.com
The former Ledsam Street Works of Belliss and Morcom works, located in Ladywood, Birmingham in 1988 Belliss and Morcom Works, Ladywood - geograph.org.uk - 703230.jpg
The former Ledsam Street Works of Belliss and Morcom works, located in Ladywood, Birmingham in 1988
Belliss and Morcom reciprocating engine and generator set, preserved at the Crich Tramway Museum Steam engine at Crich Tramway Museum - geograph.org.uk - 335291.jpg
Belliss and Morcom reciprocating engine and generator set, preserved at the Crich Tramway Museum

Belliss and Morcom is a manufacturer and supplier of oil-free reciprocating compressors, technologies and services. [1] Founded in 1852 in Birmingham, West Midlands, it is now a division of Ingersoll Rand based in Redditch, Worcestershire, England.

Contents

High pressure reciprocating compressor from Belliss and Morcom, used in the bottling industry. High pressure compressor BellisMorcom.jpg
High pressure reciprocating compressor from Belliss and Morcom, used in the bottling industry.

History

Shortly after completing his articles of apprenticeship, in 1862 George Edward Belliss acquired the engineering business of R. Bach and Co, then located at 13-14 Broad Street, Islington, Birmingham. He then went into partnership with Joseph J. Seekings, forming the limited partnership Belliss and Seekings. The partnership came to the end in 1866, but Belliss continued the business as G. E. Belliss and Co. In 1875, the organisation moved to larger premises at Ledsam Street, Ladywood. [2]

In 1884, Belliss invited Royal Navy engineer Alfred Morcom to join the firm as a partner. Previously chief engineer at Sheerness dockyard, he had gained a first-class certificate in steam engineering at the Navy's training college. Up to this point, Belliss and Morcom had specialised in producing electrical generator sets, consisting of a steam engine paired with a conjoined dynamo, to create electricity for electrical power companies, councils, hospitals, industrial premises and water and sanitation works. With the addition of Morcom, it began selling into the marine market. [2]

From 1885 onwards, the organisation received further orders from J. Samuel White of Cowes, Isle of Wight, for main power and generating machinery for Royal Navy torpedo boats. The companies subsequently went into a limited production partnership, with Morcom also assisting White in Royal Navy trials of early versions of the torpedo net. [2] In 1887, the Royal Navy placed an order directly with Belliss and Morcom for a triple-expansion engine-based main power and generator set for all 13 of the Sharpshooter class torpedo gunboats, designed by White. [2]

In 1891, chief draughtsman Albert Charles Pain used a valveless oil pump and pressure to create forced lubrication. It put a constant film of oil on the bearings, reducing wear and increasing performance and reliability. [3] In 1891, the engine was shown in the Science Museum, London. [2]

In 1893, G.E. Belliss and Co incorporated as a private limited company. In 1899, after opening a new factory in Icknield Square, the company changed its name to Belliss and Morcom, and issued further shares. Customers during this period included engines for the electricity supply plants for the cities of Bury St Edmunds, Gloucester and Port Dundas for Glasgow Corporation Tramways. [2] The expansion required the building of another new factory at Rotten Park Street. [2]

In 1907, the company built one experimental double-decker bus for the London General Omnibus Co. By the start of World War I, the company was producing a standard range of 10 brake horsepower (7.5 kW) to 3,000 brake horsepower (2,200 kW), which could be deployed for lighting, electrical power and rotational power for mills. The company was also producing: condensing plants; air compressors; fan engines; pumping engines; paraffin engines. [2]

Having produced internal combustion diesel engines during the war, the company developed and launched its range in 1919, which continued in production until the mid-1930s. [2] These were again deployed in power generation. In 1922, the company were commissioned to install six ex-Imperial German Navy submarine diesel generators into the corporation power station in London Road, Southend-on-Sea. [2]

Post World War II, the company bought the bombed-out and derelict former works of James Archdale and Co. and brought into operation a new steel shop. [2]

Merger

The late-1960s changed the company a great deal. In 1966, the receiver of Crossley Brothers sold the Crossley-Premier Engines and Furnival and Co businesses to Belliss and Morcom. [2] In 1968, the company agreed on a merger with W.H. Allen, Sons and Co. The new Amalgamated Power Engineering was owned 60% by Allen's and 40% by B&M shareholders.

In 1981 Amalgamated Power Engineering was acquired by Northern Engineering Industries plc, based in Gosforth, Newcastle upon Tyne. [4] NEI shut most of the old central Birmingham factories, consolidated the products around compressors, and moved the company to Redditch. [2] NEI itself was then acquired by Rolls-Royce plc in 1989. [4]

Present

Acquired from Rolls-Royce by Powell Duffryn, the company was merged with Hamworthy and headquartered for a period in Gloucester. [5]

In 2001, NYSE-listed Gardner Denver agreed to acquire Hamworth Belliss and Morcom, which was immediately renamed Belliss and Morcom, headquartered again in Redditch. [5]

Today the company manufactures, supplies and services oil-free reciprocating compressors, with a specialist division focusing on recycled PET plastic moulding.

Related Research Articles

<span class="mw-page-title-main">Gas turbine</span> Type of internal and continuous combustion engine

A gas turbine, also called a combustion turbine, is a type of continuous flow internal combustion engine. The main parts common to all gas turbine engines form the power-producing part and are, in the direction of flow:

<span class="mw-page-title-main">Stationary engine</span>

A stationary engine is an engine whose framework does not move. They are used to drive immobile equipment, such as pumps, generators, mills or factory machinery, or cable cars. The term usually refers to large immobile reciprocating engines, principally stationary steam engines and, to some extent, stationary internal combustion engines. Other large immobile power sources, such as steam turbines, gas turbines, and large electric motors, are categorized separately.

<span class="mw-page-title-main">Engine room</span> Space where the propulsion machinery is installed aboard a ship

On a ship, the engine room (ER) is the compartment where the machinery for marine propulsion is located. The engine room is generally the largest physical compartment of the machinery space. It houses the vessel's prime mover, usually some variations of a heat engine. On some ships, there may be more than one engine room, such as forward and aft, or port or starboard engine rooms, or may be simply numbered. To increase a vessel's safety and chances of surviving damage, the machinery necessary for the ship's operation may be segregated into various spaces.

Metropolitan-Vickers, Metrovick, or Metrovicks, was a British heavy electrical engineering company of the early-to-mid 20th century formerly known as British Westinghouse. Highly diversified, it was particularly well known for its industrial electrical equipment such as generators, steam turbines, switchgear, transformers, electronics and railway traction equipment. Metrovick holds a place in history as the builders of the first commercial transistor computer, the Metrovick 950, and the first British axial-flow jet engine, the Metropolitan-Vickers F.2. Its factory in Trafford Park, Manchester, was for most of the 20th century one of the biggest and most important heavy engineering facilities in Britain and the world.

A microturbine (MT) is a small Gas Turbine with similar cycles and components to a heavy gas turbine. The MT power-to-weight ratio is better than a heavy gas turbine because the reduction of turbine diameters causes an increase in shaft rotational speed. Heavy gas turbine generators are too large and too expensive for distributed power applications, so MTs are developed for small-scale power like electrical power generation alone or as combined cooling, heating, and power (CCHP) systems. The MT are 25 to 500 kilowatt gas turbines evolved from piston engine turbochargers, aircraft auxiliary power units (APU) or small jet engines, the size of a refrigerator. Early turbines of 30-70 kW grew to 200-250 kW.

<span class="mw-page-title-main">Souter Lighthouse</span> Lighthouse in England

Souter Lighthouse is a lighthouse located in the village of Whitburn, Tyne and Wear, England.. Souter Point was the first lighthouse in the world to be actually designed and built specifically to use alternating electric current, the most advanced lighthouse technology of its day. The light was generated by a carbon arc lamp: first lit on 11 January 1871, it was described at the time as 'without doubt one of the most powerful lights in the world'.

<span class="mw-page-title-main">Crossley</span> British internal combustion engine manufacturer

Crossley, based in Manchester, United Kingdom, was a pioneering company in the production of internal combustion engines. Since 1988 it has been part of the Rolls-Royce Power Engineering group.

<span class="mw-page-title-main">Lizard Lighthouse</span> Lighthouse on the south coast of Cornwall, England

The Lizard Lighthouse is a lighthouse at Lizard Point, Cornwall, England, built to guide vessels passing through the English Channel. It was often the welcoming beacon to persons returning to England, where on a clear night, the reflected light could be seen 100 mi (160 km) away.

Compression Systems, one of five organizational groups within Cameron International Corporation, is a provider of reciprocating and centrifugal compression equipment and aftermarket parts and services. Reciprocating compression equipment is used throughout the energy industry by gas transmission companies, compression leasing companies, oil and gas producers and independent power producers. Integrally geared centrifugal compressors are used by customers around the world in a variety of industries such as air separation, auto making, glass blowing, PET, petrochemical and chemical. Reciprocating compression was sold to GE Oil and Gas in June 2014.

<span class="mw-page-title-main">Northern Engineering Industries</span> Former British engineering firm based in Newcastle upon Tyne

Northern Engineering Industries plc (NEI) was a British engineering firm, which for over 10 years was one of the largest employers on Tyneside. Its headquarters were based at the Regent Centre at Gosforth in Newcastle upon Tyne.

Holman Brothers Ltd. was a mining equipment manufacturer founded in 1801 based in Camborne, Cornwall, England.

<span class="mw-page-title-main">PD Ports</span>

PD Ports is a Middlesbrough, UK headquartered port, shipping and logistics company; owner of Teesport, and ports at Hartlepool, Howden and Keadby; with additional operations at the Port of Felixstowe, Port of Immingham, and Port of Hull.

<span class="mw-page-title-main">Fire room</span> ( Boiler room )

On a ship, the fire room, or FR or boiler room or stokehold, referred to the space, or spaces, of a vessel where water was brought to a boil. The steam was then transmitted to a separate engine room, often located immediately aft, where it was utilized to power the vessel. To increase the safety and damage survivability of a vessel, the machinery necessary for operations may be segregated into various spaces, the fire room was one of these spaces, and was among the largest physical compartment of the machinery space. On some ships, the space comprised more than one fire room, such as forward and aft, or port or starboard fire rooms, or may be simply numbered. Each room was connected to a flue, exhausting into a stack ventilating smoke.

<span class="mw-page-title-main">High-speed steam engine</span> Steam engine designed to run at comparatively high speed

High-speed steam engines were one of the final developments of the stationary steam engine. They ran at a high speed, of several hundred rpm, which was needed by tasks such as electricity generation.

<span class="mw-page-title-main">Neuman & Esser</span>

NEUMAN & ESSER GROUP (NEA) was founded as a family establishment in Aachen, Germany in 1830. The abbreviation, NEA, stands for "NEUMAN & ESSER in Aachen". NEA is a manufacturer of reciprocating compressors and grinding systems for several industries, including oil and gas, chemical and petrochemical, food industry and renewable energy.

<span class="mw-page-title-main">Willans engine</span>

The Willans engine or central valve engine was a high-speed stationary steam engine used mainly for electricity generation around the start of the 20th century.

Amalgamated Power Engineering was a British engineering holding company, created through the 1968 merger of W.H. Allen, Sons and Co and Belliss and Morcom.

<span class="mw-page-title-main">Newton Abbot power station</span>

The Newton Abbot power station was a power station originally built in 1898 at Jetty Marsh, Newton Abbot as a small station to serve the local community. It was subsequently significantly expanded, and changed from direct current to alternating current when bought by the Torquay corporation in the 1920s to provide power across a wider area towards the coast.

<span class="mw-page-title-main">Peter Brotherhood</span>

Peter Brotherhood (1838–1902) was a British engineer. He invented the Brotherhood engine used for torpedoes as well as many other engineering products.

<span class="mw-page-title-main">W. H. Allen, Sons & Company Ltd.</span> British engineering firm

The Company, initially known as W. H. Allen & Co was founded in 1880 by William Henry Allen as a manufacturer of centrifugal pumps and steam engines in York Street, Lambeth, London. Electric light generating machinery followed with the support of Gisbert Kapp. The firm also supplied marine auxiliary equipment for both the Royal Navy and Mercantile Marine.

References

  1. "Belliss & Morcom High Pressure Air Compressor Brand". The ACE Group. Retrieved 14 July 2021.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 "Belliss and Morcom". GracesGuide.co.uk. Retrieved 21 June 2012.
  3. "Reliable power to generate electricity". BirminghamStories.co.uk. Archived from the original on 13 October 2006. Retrieved 21 June 2012.
  4. 1 2 NZR Cranes Archived 3 March 2016 at the Wayback Machine
  5. 1 2 "Gardner Denver Announces Agreement to Acquire Hamworthy Belliss & Morcom". PRNewsWire.com. Archived from the original on 20 December 2013. Retrieved 21 June 2012.