T-6 | |
---|---|
Role | Glider |
National origin | United States |
Designer | Paul Bikle |
Introduction | 1970 |
Status | No longer in production |
Number built | 1 |
Developed from | Schreder HP-14 |
The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons. [1] [2]
Bikle developed the all-metal T-6 during the time when he was director of the US National Aeronautics and Space Administration Dryden Flight Research Facility. He changed the design from the HP-14 by adding 15 in (38 cm) in to each wing, bringing the span to 57.0 ft (17.37 m). The flaps were shortened by 20 in (51 cm) each and the ailerons increased in span by a corresponding amount. The airfoil was altered from the stock Wortmann FX 61-163 to simplify construction, even at the cost of some measure of performance. The construction of the airframe was modified to eliminate the use of pop rivets and the structure and assembly requirements were simplified. The flap and flight control systems were also redesigned. Bikle also developed the T-tail, installing it in place of the HP-14's V-tail. [1] [2]
The T-6 is named for Bikle's competition number "6" and the T-tailed design of the aircraft. [2]
Upon completion of the aircraft Bikle entered it in the 1970 US Open Class Nationals, held in El Mirage, California, in which he placed fifth. [3] Following the competition Bikle, an aeronautical engineer by profession, conducted an extensive series of tests to measure the performance of the aircraft and then published his results in Soaring Magazine, the journal of the Soaring Society of America. As a result of its precisely-known performance, the aircraft has often been used as a comparative platform for evaluating other sailplanes in flight. [2]
The aircraft has been removed from the Federal Aviation Administration aircraft register. [4]
Data from Soaring [2]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13. Schreder won the 1966 US national soaring championship in the prototype HP-14.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Ryson ST-100 Cloudster is a tandem two-seat, low-wing, conventional landing gear motor glider that was designed by T. Claude Ryan first flown in 1976 and certified in 1983. The aircraft was intended to be used as both a motor glider and a light aircraft and was type certified in both categories.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.
The Hall Vector 1 is an American high-wing, ultralight glider that was designed by Stan Hall for serious cross-country flights.
The Schreder Airmate HP-9 is an American high wing, single seat glider that was designed by Richard Schreder and intended to be flown by the designer in the 1960 World Gliding Championships.
The Schreder HP-12A is an American homebuilt, mid-wing, V tailed, single-seat glider that was assembled out of various components all designed by Richard Schreder.
The Schreder HP-16 is an American mid-wing, single seat, V tailed, FAI Standard Class glider that was designed by Richard Schreder.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Luenger Beta 1 was an American high-wing, single-seat, T-tailed FAI Open Class glider designed by Hans Luenger and Spud Kohler.
The Monaghan Osprey is an American mid-wing, single-seat, T-tailed, FAI Standard Class glider that was designed and constructed by Richard C. Monaghan of Pearblossom, California.
The Parker RP9 T-Bird is an American, high-wing, T-tailed, single-seat, FAI Open Class glider that was designed and constructed by Ray Parker between 1956 and 1962.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Whigham GW-2 is an American high-wing, single-seat, V-tailed, FAI Open Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Whigham GW-5 is an American mid-wing, single seat, FAI Standard Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Glasflügel 205 Club Libelle is a high wing, T-tailed, single seat glider that was designed and produced in West Germany by Glasflügel for club and rental use.
The Strojnik S-2 is an American high-wing, single-seat motor glider that was designed and built by Aleš Strojnik.