The diffusion of plasma across a magnetic field was conjectured to follow the Bohm diffusion scaling as indicated from the early plasma experiments of very lossy machines. This predicted that the rate of diffusion was linear with temperature and inversely linear with the strength of the confining magnetic field.
The rate predicted by Bohm diffusion is much higher than the rate predicted by classical diffusion, which develops from a random walk within the plasma. The classical model scaled inversely with the square of the magnetic field. If the classical model is correct, small increases in the field lead to much longer confinement times. If the Bohm model is correct, magnetically confined fusion would not be practical.
Early fusion energy machines appeared to behave according to Bohm's model, and by the 1960s there was a significant stagnation within the field. The introduction of the tokamak in 1968 was the first evidence that the Bohm model did not hold for all machines. Bohm predicts rates that are too fast for these machines, and classical too slow; studying these machines has led to the neoclassical diffusion concept.
Bohm diffusion is characterized by a diffusion coefficient equal to
where B is the magnetic field strength, T is the electron gas temperature, e is the elementary charge, kB is the Boltzmann constant.
It was first observed in 1949 by David Bohm, E. H. S. Burhop, and Harrie Massey while studying magnetic arcs for use in isotope separation. [1] It has since been observed that many other plasmas follow this law. Fortunately there are exceptions where the diffusion rate is lower, otherwise there would be no hope of achieving practical fusion energy. In Bohm's original work he notes that the fraction 1/16 is not exact; in particular "the exact value of [the diffusion coefficient] is uncertain within a factor of 2 or 3." Lyman Spitzer considered this fraction as a factor related to plasma instability. [2]
Generally diffusion can be modeled as a random walk of steps of length and time . If the diffusion is collisional, then is the mean free path and is the inverse of the collision frequency. The diffusion coefficient D can be expressed variously as
where is the velocity between collisions.
In a magnetized plasma, the collision frequency is usually small compared to the gyrofrequency, so that the step size is the gyroradius and the step time is the collision time, , which is related to the collision frequency through , leading to (classical diffusion).
On the other hand, if the collision frequency is larger than the gyrofrequency, then the particles can be considered to move freely with the thermal velocity vth between collisions, and the diffusion coefficient takes the form . In this regime, the diffusion is maximum when the collision frequency is equal to the gyrofrequency, in which case . Substituting , and (the cyclotron frequency), we arrive at
which is the Bohm scaling. Considering the approximate nature of this derivation, the missing 1/16 in front is no cause for concern.
Bohm diffusion is typically greater than classical diffusion. The fact that classical diffusion and Bohm diffusion scale as different powers of the magnetic field is often used to distinguish between the two.
In light of the calculation above, it is tempting to think of Bohm diffusion as classical diffusion with an anomalous collision rate that maximizes the transport, but the physical picture is different. Anomalous diffusion is the result of turbulence. Regions of higher or lower electric potential result in eddies because the plasma moves around them with the E-cross-B drift velocity equal to E/B. These eddies play a similar role to the gyro-orbits in classical diffusion, except that the physics of the turbulence can be such that the decorrelation time is approximately equal to the turn-over time, resulting in Bohm scaling. Another way of looking at it is that the turbulent electric field is approximately equal to the potential perturbation divided by the scale length , and the potential perturbation can be expected to be a sizeable fraction of the kBT/e. The turbulent diffusion constant is then independent of the scale length and is approximately equal to the Bohm value.
The theoretical understanding of plasma diffusion especially the Bohm diffusion remained elusive until the 1970s when Taylor and McNamara [3] put forward a 2d guiding center plasma model. The concepts of negative temperature state, [4] and of the convective cells [5] contributed much to the understanding of the diffusion. The underlying physics may be explained as follows. The process can be a transport driven by the thermal fluctuations, corresponding to the lowest possible random electric fields. The low-frequency spectrum will cause the E×B drift. Due to the long range nature of Coulomb interaction, the wave coherence time is long enough to allow virtually free streaming of particles across the field lines. Thus, the transport would be the only mechanism to limit the run of its own course and to result in a self-correction by quenching the coherent transport through the diffusive damping. To quantify these statements, we may write down the diffusive damping time as
where k⊥ is the wave number perpendicular to the magnetic field. Therefore, the step size is , and the diffusion coefficient is
It clearly yields for the diffusion a scaling law of B−1 for the two dimensional plasma. The thermal fluctuation is typically a small portion of the particle thermal energy. It is reduced by the plasma parameter
and is given by
where n0 is the plasma density, λD is the Debye length, and T is the plasma temperature. Taking and substituting the electric field by the thermal energy, we would have
The 2D plasma model becomes invalid when the parallel decoherence is significant. An effective diffusion mechanism combining effects from the ExB drift and the cyclotron resonance was proposed, [6] predicting a scaling law of B−3/2.
In 2015, new exact explanation for the original Bohm's experiment is reported, [7] in which the cross-field diffusion measured at Bohm's experiment and Simon's experiment [8] were explained by the combination of the ion gyro-center shift and the short circuit effect. The ion gyro-center shift occurs when an ion collides with a neutral to exchange the momentum; typical example is ion-neutral charge exchange reaction. The one directional shifts of gyro-centers take place when ions are in the perpendicular (to the magnetic field) drift motion such as diamagnetic drift. The electron gyro-center shift is relatively small since the electron gyro-radius is much smaller than ion's so it can be disregarded. Once ions move across the magnetic field by the gyro-center shift, this movement generates spontaneous electric unbalance between in and out of the plasma. However this electric unbalance is immediately compensated by the electron flow through the parallel path and conducting end wall, when the plasma is contained in the cylindrical structure as in Bohm's and Simon's experiments. Simon recognized this electron flow and named it as 'short circuit' effect in 1955. [8] With the help of short circuit effect the ion flow induced by the diamagnetic drift now becomes whole plasma flux which is proportional to the density gradient since the diamagnetic drift includes pressure gradient. The diamagnetic drift can be described as , (here n is density) for approximately constant temperature over the diffusion region. When the particle flux is proportional to , the other part than is the diffusion coefficient. So naturally the diffusion is proportional to . The other front coefficient of this diffusion is a function of the ratio between the charge exchange reaction rate and the gyro frequency. A careful analysis tells this front coefficient for Bohm's experiment was in the range of 1/13 ~ 1/40. [7] The gyro-center shift analysis also reported the turbulence induced diffusion coefficient which is responsible for the anomalous diffusion in many fusion devices; described as . [9] This means different two diffusion mechanisms (the arc discharge diffusion such as Bohm's experiment and the turbulence induced diffusion such as in the tokamak) have been called by the same name of "Bohm diffusion".
Brownian motion is the random motion of particles suspended in a medium.
Fick's laws of diffusion describe diffusion and were first posited by Adolf Fick in 1855 on the basis of largely experimental results. They can be used to solve for the diffusion coefficient, D. Fick's first law can be used to derive his second law which in turn is identical to the diffusion equation.
In the study of heat transfer, Newton's law of cooling is a physical law which states that
The rate of heat loss of a body is directly proportional to the difference in the temperatures between the body and its environment.
In physics, a Langevin equation is a stochastic differential equation describing how a system evolves when subjected to a combination of deterministic and fluctuating ("random") forces. The dependent variables in a Langevin equation typically are collective (macroscopic) variables changing only slowly in comparison to the other (microscopic) variables of the system. The fast (microscopic) variables are responsible for the stochastic nature of the Langevin equation. One application is to Brownian motion, which models the fluctuating motion of a small particle in a fluid.
In statistical mechanics and information theory, the Fokker–Planck equation is a partial differential equation that describes the time evolution of the probability density function of the velocity of a particle under the influence of drag forces and random forces, as in Brownian motion. The equation can be generalized to other observables as well. The Fokker-Planck equation has multiple applications in information theory, graph theory, data science, finance, economics etc.
In optics, a Fabry–Pérot interferometer (FPI) or etalon is an optical cavity made from two parallel reflecting surfaces. Optical waves can pass through the optical cavity only when they are in resonance with it. It is named after Charles Fabry and Alfred Perot, who developed the instrument in 1899. Etalon is from the French étalon, meaning "measuring gauge" or "standard".
The Drude model of electrical conduction was proposed in 1900 by Paul Drude to explain the transport properties of electrons in materials. Basically, Ohm's law was well established and stated that the current J and voltage V driving the current are related to the resistance R of the material. The inverse of the resistance is known as the conductance. When we consider a metal of unit length and unit cross sectional area, the conductance is known as the conductivity, which is the inverse of resistivity. The Drude model attempts to explain the resistivity of a conductor in terms of the scattering of electrons by the relatively immobile ions in the metal that act like obstructions to the flow of electrons.
In physics, the S-matrix or scattering matrix relates the initial state and the final state of a physical system undergoing a scattering process. It is used in quantum mechanics, scattering theory and quantum field theory (QFT).
In solid-state physics, the electron mobility characterises how quickly an electron can move through a metal or semiconductor when pushed or pulled by an electric field. There is an analogous quantity for holes, called hole mobility. The term carrier mobility refers in general to both electron and hole mobility.
The Lawson criterion is a figure of merit used in nuclear fusion research. It compares the rate of energy being generated by fusion reactions within the fusion fuel to the rate of energy losses to the environment. When the rate of production is higher than the rate of loss, the system will produce net energy. If enough of that energy is captured by the fuel, the system will become self-sustaining and is said to be ignited.
In solid-state physics, the free electron model is a quantum mechanical model for the behaviour of charge carriers in a metallic solid. It was developed in 1927, principally by Arnold Sommerfeld, who combined the classical Drude model with quantum mechanical Fermi–Dirac statistics and hence it is also known as the Drude–Sommerfeld model.
A Coulomb collision is a binary elastic collision between two charged particles interacting through their own electric field. As with any inverse-square law, the resulting trajectories of the colliding particles is a hyperbolic Keplerian orbit. This type of collision is common in plasmas where the typical kinetic energy of the particles is too large to produce a significant deviation from the initial trajectories of the colliding particles, and the cumulative effect of many collisions is considered instead. The importance of Coulomb collisions was first pointed out by Lev Landau in 1936, who also derived the corresponding kinetic equation which is known as the Landau kinetic equation.
In mathematics, a symplectic integrator (SI) is a numerical integration scheme for Hamiltonian systems. Symplectic integrators form the subclass of geometric integrators which, by definition, are canonical transformations. They are widely used in nonlinear dynamics, molecular dynamics, discrete element methods, accelerator physics, plasma physics, quantum physics, and celestial mechanics.
In semiconductor physics, the Haynes–Shockley experiment was an experiment that demonstrated that diffusion of minority carriers in a semiconductor could result in a current. The experiment was reported in a short paper by Haynes and Shockley in 1948, with a more detailed version published by Shockley, Pearson, and Haynes in 1949. The experiment can be used to measure carrier mobility, carrier lifetime, and diffusion coefficient.
Neutral-beam injection (NBI) is one method used to heat plasma inside a fusion device consisting in a beam of high-energy neutral particles that can enter the magnetic confinement field. When these neutral particles are ionized by collision with the plasma particles, they are kept in the plasma by the confining magnetic field and can transfer most of their energy by further collisions with the plasma. By tangential injection in the torus, neutral beams also provide momentum to the plasma and current drive, one essential feature for long pulses of burning plasmas. Neutral-beam injection is a flexible and reliable technique, which has been the main heating system on a large variety of fusion devices. To date, all NBI systems were based on positive precursor ion beams. In the 1990s there has been impressive progress in negative ion sources and accelerators with the construction of multi-megawatt negative-ion-based NBI systems at LHD (H0, 180 keV) and JT-60U (D0, 500 keV). The NBI designed for ITER is a substantial challenge (D0, 1 MeV, 40 A) and a prototype is being constructed to optimize its performance in view of the ITER future operations. Other ways to heat plasma for nuclear fusion include RF heating, electron cyclotron resonance heating (ECRH), ion cyclotron resonance heating (ICRH), and lower hybrid resonance heating (LH).
Rotational diffusion is the rotational movement which acts upon any object such as particles, molecules, atoms when present in a fluid, by random changes in their orientations. Whilst the directions and intensities of these changes are statistically random, they do not arise randomly and are instead the result of interactions between particles. One example occurs in colloids, where relatively large insoluble particles are suspended in a greater amount of fluid. The changes in orientation occur from collisions between the particle and the many molecules forming the fluid surrounding the particle, which each transfer kinetic energy to the particle, and as such can be considered random due to the varied speeds and amounts of fluid molecules incident on each individual particle at any given time.
Diffusion is the net movement of anything generally from a region of higher concentration to a region of lower concentration. Diffusion is driven by a gradient in Gibbs free energy or chemical potential. It is possible to diffuse "uphill" from a region of lower concentration to a region of higher concentration, as in spinodal decomposition. Diffusion is a stochastic process due to the inherent randomness of the diffusing entity and can be used to model many real-life stochastic scenarios. Therefore, diffusion and the corresponding mathematical models are used in several fields beyond physics, such as statistics, probability theory, information theory, neural networks, finance, and marketing.
Nuclear magnetic resonance (NMR) in porous materials covers the application of using NMR as a tool to study the structure of porous media and various processes occurring in them. This technique allows the determination of characteristics such as the porosity and pore size distribution, the permeability, the water saturation, the wettability, etc.
Laser linewidth is the spectral linewidth of a laser beam.
In plasma physics and magnetic confinement fusion, neoclassical transport or neoclassical diffusion is a theoretical description of collisional transport in toroidal plasmas, usually found in tokamaks or stellerators. It is a modification of classical diffusion adding in effects of non-uniform magnetic fields due to the toroidal geometry, which give rise to new diffusion effects.