Development | |
---|---|
Designer | C&C Design |
Location | Canada |
Year | 1981 |
Builder(s) | C&C Yachts |
Name | C&C 32 |
Boat | |
Boat weight | 9,680 lb (4,391 kg) |
Draft | 5.67 ft (1.73 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 31.50 ft (9.60 m) |
LWL | 24.67 ft (7.52 m) |
Beam | 10.25 ft (3.12 m) |
Engine type | Universal Atomic 4 30 hp (22 kW) gasoline engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 3,900 lb (1,769 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
General | Masthead sloop |
I foretriangle height | 41.12 ft (12.53 m) |
J foretriangle base | 12.75 ft (3.89 m) |
P mainsail luff | 35.25 ft (10.74 m) |
E mainsail foot | 11.33 ft (3.45 m) |
Sails | |
Mainsail area | 199.69 sq ft (18.552 m2) |
Jib/genoa area | 262.14 sq ft (24.354 m2) |
Total sail area | 461.83 sq ft (42.905 m2) |
Racing | |
PHRF | 162 (average) |
The C&C 32 is a Canadian sailboat, that was designed by C&C Design and first built in 1981. [1] [2] [3]
The boat was built by C&C Yachts in Canada, but it is now out of production. [1] [3] [4]
The C&C 32 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel or, optionally, a fixed stub keel and centreboard. [1] [3]
The fixed keel version displaces 9,680 lb (4,391 kg) and carries 3,900 lb (1,769 kg) of lead ballast, while the centreboard version displaces 10,485 lb (4,756 kg) and carries 4,705 lb (2,134 kg) of lead ballast. [1] [3]
The boat has a draft of 5.67 ft (1.73 m) with the standard keel and 6.90 ft (2.10 m) with the optional stub keel with the centreboard extended and 4.00 ft (1.22 m) with it retracted. [1] [3]
The boat is fitted with a Universal Atomic 4 30 hp (22 kW) gasoline engine. A Yanmar 2GM diesel engine was available optionally. The fuel tank holds 20 U.S. gallons (76 L; 17 imp gal) and the fresh water tank has a capacity of 30 U.S. gallons (110 L; 25 imp gal). [1] [3]
The fin keel version has a PHRF racing average handicap of 162 with a high of 172 and low of 156. The stub keel and centreboard version has a PHRF racing average handicap of 171 with a high of 171 and low of 171. It has a hull speed of 6.66 kn (12.33 km/h). [3] [5] [6]
In a review Michael McGoldrick wrote, "The C&C 32 captures the essence of the cruiser/club racer of the early 1980s. While this boat may not [have] emerged as a C&C classic, it does epitomize the builder's work at the height of its role and reputation in the Canadian sailboat industry. In many ways, this boat seems like the natural evolution of what C&C had started with its earlier 27 and 30 foots models, only everything is a little larger, and its lines are little more modern looking. Below is the familiar dinette arrangement opposite a full length settee, a layout which it has in common with its earlier predecessors. However, the interior of the 32 also has room for a quarter berth and a permanent chart table/navigation station. Outside is a large T-shaped cockpit, and the nice clean lines of the deck and cabin is what helped earn C&C a reputation for coming up with good looking designs." [7]
Similar sailboats
The C&C 35, also called the Redwing 35, is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1969.
The CS 30 is a Canadian sailboat, that was designed by Tony Castro and first built in 1984. The design is out of production.
The C&C 29-2, also called the C&C 29 Mark II, is a Canadian sailboat that was designed by Cuthbertson & Cassian as a Midget Ocean Racing Club racer-cruiser and first built in 1983.
The C&C 33 is a series of Canadian sailboats, that were designed by Robert W. Ball of C&C Design and first built in 1974.
The DS-22 is a Canadian trailerable sailboat, that was designed by Bruce Kirby and first built in 1983.
The Paceship PY 23 is a Canadian trailerable sailboat, that was designed by John Deknatel of C. Raymond Hunt Associates and first built in 1973.
The Catalina 250 is an American trailerable sailboat, that was designed by the Catalina Design Team and first built in 1995.
The Aloha 30 is a Canadian sailboat, that was designed by Ron Holland and first built in 1986.
The Catalina 28 is an American sailboat, that was designed by Gerry Douglas and first built in 1991.
The C&C 34 is a Canadian sailboat, that was designed by Robert W. Ball and first built in 1977.
The C&C 36-1 is a Canadian sailboat that was designed by C&C Design and first built in 1977.
The C&C 37 is a Canadian sailboat, that was designed by Robert W. Ball of C&C Design and first built in 1981.
The C&C 38 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1973.
The C&C 40 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1968.
The Hunter 27 is a series of American sailboats, that were first built in 1974.
The Grampian 26 is a Canadian sailboat, that was designed by Alex McGruer and first built in 1967.
The Grampian 30 is a Canadian sailboat, that was designed by Alex McGruer and first built in 1969.
The Nonsuch 33 is a Canadian sailboat, that was designed by Mark Ellis Design and first built in 1988.
The C&C 41 is a Canadian sailboat, that was designed by Robert W. Ball at the request of Jim Plaxton, who had purchased C&C Yachts in 1981. Plaxton wanted an International Offshore Rule racer and the resulting design went into production in 1981.
The Hunter 40 is an American sailboat that was designed by Cortland Steck and first built in 1984.