Development | |
---|---|
Designer | Robert W. Ball |
Location | Canada |
Year | 1981 |
No. built | two or more |
Builder(s) | C&C Yachts Custom Division |
Role | Long range cruising |
Name | C&C Custom 62 |
Boat | |
Displacement | 65,000 lb (29,484 kg) |
Draft | 6.5 ft (2.0 m) to 8 ft (2.4 m) depending on keel fitted |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 62.1 ft (18.9 m) |
LWL | 52.8 ft (16.1 m) |
Beam | 15.2 ft (4.6 m) |
Engine type | Caterpillar Inc. 100 hp (75 kW) diesel engine |
Hull appendages | |
Keel/board type | Centreboard or fin keel |
Ballast | 26,000 lb (11,793 kg) |
Rudder(s) | Internally-mounted spade-type rudder |
Rig | |
Rig type | Masthead bermuda rig |
Sails | |
Sailplan | Double headsail ketch |
Total sail area | 1,593 sq ft (148.0 m2) |
The C&C Custom 62 is a Canadian sailboat, that was designed by Robert W. Ball of C&C Design for long range cruising and first built in 1981. [1] [2]
The design was built under Erich Bruckmann's supervision at the Custom Division of C&C Yachts in Canada, but it is now out of production. [1] At least two examples were built.
The Custom 62 is a development of the C&C 61.
The first Custom 62 was built in a conventional aft cockpit layout with the wheel aft of the mizzen and a keel / centreboard arrangement allowing a 6.5 ft (2.0 m) draft with the centreboard up. She has a cherry-wood interior. She was renamed over the years as she changed owners, Djinn, Marauder, and now Lilia. [3] [4] [5]
C&C Yachts built at least one other Custom 62 for an American couple, this one as a center cockpit version with an open pilot house. It has a fixed fin keel giving an 8 ft (2.4 m) draft. The boat was named Pegaso and intended for long-range, short-handed sailing, primarily in the Pacific northwest. [1] It has two helm stations, the first in the pilothouse, while the second helm station is aft, just forward of the mizzen mast. The interior is finished in teak with off-white panelling. [1]
The C&C Custom 62 is a recreational keelboat, built predominantly of fiberglass, with double balsawood cores (glass/balsa/glass/balsa/glass), using the same construction method as the C&C 61. The hull has extra reinforcement at the stem, amidships, and transom against potential strikes with submerged objects. It has a double headsail ketch rig, a raked stem, a reverse transom, an internally-mounted spade-type rudder controlled by a wheel via a Wagner hydraulic system with redundant pumps, lines and cylinders. [1]
The boat displaces 65,000 lb (29,484 kg) and carries 26,000 lb (11,793 kg) of ballast. The design has a draft of 8 ft (2.4 m) with the standard keel fitted or, with the keel / centreboard arrangement, 6.5 ft (2.0 m) draft with the centreboard up.
In Pegaso accommodations include: crew accommodations forward with adjustable pipe berths, a workbench, spares cabinet, and sail bins; a double stateroom with washstand (and head opposite); aft a master stateroom, with a walk-around double berth, large hanging lockers, a desk, and a filing cabinet. An inch-thick port window under the bed allows inspecting the feathering propeller. The salon has a U-dinette table and extensive bookshelves with a settee and pilot berth opposite. [1]
The galley is on the port side, has a "U" shape, with three sinks, a range powered by propane and a large oven. It also has a toaster, microwave oven and a top-opening refrigerator and freezer. [1]
Marauder's interior was laid out somewhat differently.
Main engine: fitted with a Caterpillar Inc. diesel engine of 100 hp (75 kW), turning a Luke 30x24 feathering propeller and carries fuel for a 3,000 mi (4,800 km) motoring range.
Electrics: There are two Onan generators of 7.5 kW (10 hp) to power the freezer and clothes drier. [1]
Navigation Equipment:
In pilot house: [1]
Navigation station in saloon: [1]
In a review for Yachting magazine, in May 1983, David Weatherston wrote: "My sea trial aboard Pegaso, on Lake Ontario last November, proved the yacht worthy of her racing heritage. She was responsive, even in a seaway. She tracked smoothly. And under autopilot she required very little corrective steering. On a reach, in brisk conditions, she carried her sail area stiffly, and with an easy motion that would keep any crew in high spirits." [1]
A review in May 1983 in Cruising World magazine stated, "Like all other boats produced from their yard, the 62 combines good looks, performance and comfortable living space. It's good to see that a reputable production yard is making the extra effort to tailor large yachts to owners' needs —certainly they have the experience and skill." [2]
The Custom 62, Pegaso, was featured in a book, Just the Two of Us, by Alicia Blodgett, a book about sailing, about a newlywed couple's adjustment to life at sea and each other, through 47 countries and 45,000 miles. The book was published by Summit in 1999. [6]
Of Pegaso, Bill Blodgett, husband and sailing partner of Alicia Blodgett, said:
My tribute to Pegaso is she carried its two different Mom and Pop owners around the world safely and comfortably while averaging 200 miles a day crossing the Pacific.
A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a centreboard trunk (UK) or centerboard case (US). The retractability allows the centreboard to be raised to operate in shallow waters, to move the centre of lateral resistance, to reduce drag when the full area of the centreboard is not needed, or when removing the boat from the water, as when trailering. A centreboard which consists of solely a pivoting metal plate is called a centerplate; the term "centreboard" may refer to either a wooden or a metal pivoting retractable foil. A daggerboard is similar but slides vertically rather than pivoting.
The Swan 51 is a Finnish sailboat that was designed by Germán Frers as a racer-cruiser and first built in 1980. It was the first Swan design by Frers and led to a long collaboration between Frers and the manufacturer.
The Swan 57 is a Finnish sailboat that was designed by Olin Stephens of Sparkman & Stephens as a racer-cruiser and first built in 1977. The boat is Sparkman & Stephens' design #2297 and was their last Swan boat designed.
The Swan 61 is a Finnish sailboat that was designed by Germán Frers as a blue water cruiser and first built in 1985.
The CS 22 is a Canadian trailerable sailboat, that was designed by John A. Butler and first built in 1971. The design is out of production.
The C&C 37/40 is a Canadian 12.05 metres (39.5 ft) LOA fibreglass monohull sailing yacht, designed in 1988 by Robert W. Ball of Cuthbertson & Cassian as a replacement for the earlier C&C 37 dating from 1981. The C&C 37/40 is a recreational keelboat of moderate displacement, intended as a cruiser/racer or oceangoing racer. The yachts have a masthead sloop rig, with a fin keel and an internally-mounted spade-type rudder. Over 110 of the 37/40 type were built before the Canadian plant closed in 1994. The design is no longer produced.
The C&C Custom 67 is a Canadian sailboat, that was designed by Robert W. Ball of C&C Yachts and was launched and named Archangel in September 1980. She remains the largest pleasure boat commission ever received by C&C, and epitomized a trend within C&C during the later 1970s and early 1980s toward more cruising-oriented designs under George Cuthbertson's direction, a trend best illustrated by the development of the Landfall series.
The C&C 40 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1968.
The C&C 44 and the C&C 44 Custom are a series of Canadian sailboats, that were designed by Robert W. Ball and first built in 1985.
The Beneteau 323 is a French sailboat that was designed by Jean Marie Finot and Pascal Conq of Group Finot/Conq and first built in 2001.
The Columbia 34 is an American sailboat that was designed by Wirth Munroe and Richard Valdez as a cruiser and first built in 1966.
The Freedom 35 is an American sailboat that was designed by David Pedrick as a racer/cruiser and first built in 1993.
The Pilot 35 is an American sailboat that was designed by Sparkman & Stephens as a racer-cruiser and first built in 1962.
The Baltic 37 is a Finnish sailboat that was designed by Robert W. Ball and C&C Design as an International Offshore Rule (IOR) racer-cruiser and first built in 1978.
The Dockrell 37 is a British sailboat that was designed by Dockrell Yachts as a cruiser and first built in 1981.
The Endeavour 37 is an American sailboat that was designed by Dennis Robbins as racer-cruiser and first built in 1977.
The Nordic 44 is an American sailboat that was designed by Robert Perry as a racer-cruiser and first built in 1980.
The Bermuda 40 is an American sailboat that was designed by William Tripp, Jr. in 1958 as a racer-cruiser and first built in 1960.
The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.
The Sun Kiss 45, originally just called the Sun Kiss, is a French sailboat that was designed by Philippe Briand as a cruiser and first built in 1983. It was the first design in the two-boat Sun Kiss line that also includes the Sun Kiss 47. The Sun Kiss 45 shares a hull design with the Espace 1300.