C melody saxophone

Last updated

C melody saxophone
Conn C Melody Saxophone 1921.jpg
Woodwind instrument
Classification Single-reed
Hornbostel–Sachs classification 422.212-71
(Single-reed aerophone with keys)
Inventor(s) Adolphe Sax
Developed1840s
Playing range
C melody saxophone
Melody saxophone in C sounds one octave lower than written.
Related instruments
Sizes:
Orchestral saxophones:
Specialty saxophones:
Musicians
See list of saxophonists

The C melody saxophone, also known as the C tenor saxophone, is a saxophone pitched in the key of C one whole tone above the common B-flat tenor saxophone. [1] The C melody was part of the series of saxophones pitched in C and F intended by the instrument's inventor, Adolphe Sax, for orchestral use. The instrument enjoyed popularity in the early 1900s, perhaps most prominently used by Rudy Wiedoeft and Frankie Trumbauer, but is now uncommon.

Contents

A C melody saxophone is larger than an alto and smaller than a tenor. The bore on most models has a diameter and taper more like a 'stretched' alto than a tenor. When seen in profile, its shape bears some resemblance to a tenor saxophone, though it is smaller and the bell appears longer. Most C melody saxophones have curved necks (with a similar shape to that of the tenor saxophone) though C.G.Conn did make straight-necked C melody instruments (more similar to the alto). C melody saxophones are usually marked with a letter "C" above or below the serial number.

Since 1930, only saxophones in the key of B♭ and E♭ (originally intended by Sax for use in military bands and wind ensembles) have been produced on a large scale. However, in the early years of the 21st century, small-scale production of new C melody saxophones had commenced in China for a company called Aquilasax though production ceased by 2015. [2] Student-quality C melody instruments are, as of 2023, available from Thomann (Germany) and Sakkusu (UK). [3]

Advantages

A major selling point for the C melody saxophone was the fact that in contrast to other saxophones, it was not a transposing instrument. As a result, the player could read regular printed music (e.g. for flute, oboe, violin, piano, guitar or voice) without having to transpose or read music parts that have been transposed into B♭ or E♭, which most other saxophones would require. This enabled amateur musicians to play along with a friend or family member by reading from the same sheet of music—so long as the music fell within the pitch range of the C melody saxophone itself, that is, was not too high or low. Another selling point was that the C melody produces a more muted tone than the E♭ alto or B♭ tenor, which was useful when playing at home. Many novelty tunes, most influenced by 1920s dance music, were written specifically for the instrument. They were sometimes also used in churches to accompany hymns. Sax players in Irish and Irish-American dance bands of the 1920s and '30s often used the C melody as it made for easier fingering in the keys of G and D commonly used for traditional Irish tunes played by fiddlers, flute players and button accordionists. Similarly, some players prefer the C melody when playing guitar-based blues music in E or A.

Mouthpieces

Dedicated mouthpieces were produced for the C melody saxophone, though these may be hard to find in the 21st century. The C melody has a muted sound when compared to other saxophone types, particularly if an original vintage mouthpiece is used. This made it particularly useful for its originally intended environment of playing in drawing rooms. C melody mouthpieces often give a C melody saxophone a slightly muffled sound, which may or may not be what the player desires. Some players successfully use a modern tenor saxophone mouthpiece, modified by cutting off one centimeter of the mouthpiece if needed to fit, with their C melody saxophone, though depending on which mouthpiece type is chosen (e.g. long shank or short shank) there may be problems regarding the accuracy of intonation, particularly at the upper end of the range. As a result, some experimentation may be required in order to find a tenor mouthpiece which provides accurate intonation across the entire scale. Other players have successfully fitted alto saxophone mouthpieces to their C melody saxophones. As before, some experimentation may be required. With a more modern mouthpiece fitted, a C melody saxophone can lose some of its muted qualities and sound brighter, with more of the sonic power that an alto or tenor saxophone gives. Currently, there are a number of manufacturers producing C melody mouthpieces e.g. Beechler, [4] Ralph Morgan, [5] and Ronald Caravan.

Production history

A number of high-quality manufacturers produced C melody saxophones (including Buescher, C.G.Conn, Martin, [6] King [7] and Selmer) from 1914 through 1930. Most of these companies also manufactured "stencil" saxophones for other vendors under different names e.g. the 'Harwood Jenkins', 'Lyon & Healy', 'Oliver Ditson' and 'Wurlitzer American' - all of which were actually made by Buescher. Production of C melody saxophones appears to have reached a peak around 1923, with a gradual reduction thereafter. Comparatively few C melody saxophones were made in the late 1920s. The Conn straight-neck Tenor in C is the most common of the actual orchestral saxophones and has a more classical sound and plays in tune throughout the instrument's range. This is one of the few models actually made for professional use. However, the long straight neck means that the saxophone must be held away from the player's body, a posture which some people may find uncomfortable.

Cheaper, novelty C melody saxophones were marketed from the late 1910s through the early 1930s as a version of the saxophone intended for amateur use, in homes, schools, and town bands. It was made with a bore considerably narrower than that of the B♭ tenor saxophone, being more or less a "stretched" version of the alto saxophone bore.

Rudy Wiedoeft in 1920, playing a C-melody saxophone Rudy Wiedoeft in 1920.jpg
Rudy Wiedoeft in 1920, playing a C-melody saxophone
Frankie Trumbauer holding a C-melody saxophone, circa 1922 FrankieTrumbauer.jpeg
Frankie Trumbauer holding a C-melody saxophone, circa 1922
A straight-necked Conn C melody saxophone (New Wonder Series 1) with a serial number which dates manufacture to 1922 ConnCMelodySax.JPG
A straight-necked Conn C melody saxophone (New Wonder Series 1) with a serial number which dates manufacture to 1922
Dick Stabile playing a C melody saxophone in New York, circa 1946 Dick Stabile New York between 1946 and 1948.jpg
Dick Stabile playing a C melody saxophone in New York, circa 1946
A straight-necked Conn C melody saxophone (New Wonder Series 2 dating from circa 1926) played by Nathan Haines Nathan Haines.jpg
A straight-necked Conn C melody saxophone (New Wonder Series 2 dating from circa 1926) played by Nathan Haines

By the late 1920s the popularity of C melody saxophones had faded. Sales of all saxophones fell dramatically after the Wall Street Crash of 1929, and the C melody was one of several models [8] (including the mezzo-soprano saxophone) which were dropped from production soon after. However, it is important to note that production ended for purely financial reasons, and not because of any inherent flaw in the design or poor manufacturing standards. C melody saxophones were as good as the reputation of whichever company manufactured them. The basic problem was that the Great Depression which followed immediately after the stock market crash of 1929 caused extremely harsh economic conditions throughout the world, which affected the production of all leisure-related consumer products. This unusually profound recession hit saxophone manufacturers hard, forcing them to reduce the range of musical instruments they produced down to the most popular models, simply in order for those companies to survive. [9] As a result, production of C melody saxophones ended abruptly. By the time the world economy had recovered sufficiently for C melody saxophones to be economically viable again (around 1935) people's leisure time interests had changed and there was no longer a market for them. Additionally, the "Big Band" era had started in the early 1930s and anyone who wanted to learn the saxophone was interested primarily in soprano, alto, tenor or baritone because this would, potentially at least, allow them to play in a Big Band, and Big Bands did not feature C melody saxophones in their instrument line-up. As a result, there was no consumer demand for C melody instruments, so would-be manufacturers had no incentive to resume production. Not surprisingly, instrument manufacturers concentrated instead on making other types which had strong customer demand and were easy to sell e.g. alto and tenor saxophones.

C.G.Conn made a small number of C melody saxophones during the 1930s which were stamped with the model number "8M". These were almost certainly completed saxophone bodies that had been kept in storage since the 1920s and which were furnished with updated keywork after the Great Depression ended. At least one Conn C melody dating from 1938 has "Transitional" keywork (similar to that found on a Conn 6M alto or Conn 10M tenor) plus a "Lady Face" engraving on the bell front. However, late model Conn C melody saxophones like these are extremely unusual because they are rare exceptions to the general rule that production of C melody saxophones ended in 1930.

During the 1960s, the French woodwind manufacturer Leblanc produced a few C melody saxophones (brand stamped on bell was Vito), though it is thought that they manufactured fewer than 20 examples.

Some early jazz players got their start on the C melody, including Benny Carter and Coleman Hawkins, though Carter eventually moved to the alto, and Hawkins to the B♭ tenor. Among the most famous musicians to perform mainly on C melody sax was Rudy Weidoeft. Although he played alto and soprano saxophones as well (the latter in ensembles with Arnold Brilhart, Alford Evans, and others), he made his most famous recordings on the C melody, and was a significant factor in popularizing the instrument among the general public. Another famous C melody player was Frankie Trumbauer, a jazz player who was known for his superb technical ability on the instrument and influence on later generations. Jack Pettis, a member of the Ben Bernie orchestra and a recording artist under his own name, was another skilled player of the instrument.

A few modern-day saxophonists occasionally perform on C melody instruments, though rarely if ever as a primary instrument. Examples include Anthony Braxton, [10] Kyle Vincent, Scott Robinson, Rick Arbuckle, Rosy McHargue, Dan Levinson, Hayes Greenfield and Joe Lovano. [11] Carla Bley, though mainly a keyboardist, has played the C Melody sax occasionally on recordings led by her daughter Karen Mantler. [12]

Despite the fact that they have not been manufactured in over 75 years, C melody saxophones are readily available today, due to their limited use and the sheer number that were produced in the early 20th century. They can often be found at stores that carry used instruments, tag sales, rummage sales and pawn shops across the United States.

Related Research Articles

<span class="mw-page-title-main">Saxophone</span> Single-reed woodwind instrument

The saxophone is a type of single-reed woodwind instrument with a conical body, usually made of brass. As with all single-reed instruments, sound is produced when a reed on a mouthpiece vibrates to produce a sound wave inside the instrument's body. The pitch is controlled by opening and closing holes in the body to change the effective length of the tube. The holes are closed by leather pads attached to keys operated by the player. Saxophones are made in various sizes and are almost always treated as transposing instruments. Saxophone players are called saxophonists.

<span class="mw-page-title-main">Saxhorn</span> Family of valved brass instruments

The saxhorn is a family of valved brass instruments that have conical bores and deep cup-shaped mouthpieces. The saxhorn family was developed by Adolphe Sax, who is also known for creating the saxophone family. The sound of the saxhorn has a characteristic mellow tone quality and blends well with other brass.

<span class="mw-page-title-main">Trombone</span> Brass instrument played with a slide

The trombone is a musical instrument in the brass family. As with all brass instruments, sound is produced when the player's vibrating lips cause the air column inside the instrument to vibrate. Nearly all trombones use a telescoping slide mechanism to alter the pitch instead of the valves used by other brass instruments. The valve trombone is an exception, using three valves similar to those on a trumpet, and the superbone has valves and a slide.

<span class="mw-page-title-main">Sarrusophone</span> Family of metal double-reed wind instruments

The sarrusophones are a family of metal double reed conical bore woodwind instruments patented and first manufactured by French instrument maker Pierre-Louis Gautrot in 1856. Gautrot named the sarrusophone after French bandmaster Pierre-Auguste Sarrus (1813–1876), whom he credited with the concept of the instrument, though it is not clear whether Sarrus benefited financially. The instruments were intended for military bands, to serve as replacements for oboes and bassoons which at the time lacked the carrying power required for outdoor marching music. Although originally designed as double-reed instruments, single-reed mouthpieces were later developed for use with the larger bass and contrabass sarrusophones.

<span class="mw-page-title-main">Tenor horn</span> Brass instrument in the saxhorn family

The tenor horn is a brass instrument in the saxhorn family and is usually pitched in E♭. It has a bore that is mostly conical, like the flugelhorn and euphonium, and normally uses a deep, cornet-like mouthpiece.

<span class="mw-page-title-main">Mellophone</span> Brass instrument

The mellophone is a brass instrument typically pitched in the key of F, though models in E♭, D, C, and G have also historically existed. It has a conical bore, like that of the euphonium and flugelhorn. The mellophone is used as the middle-voiced brass instrument in marching bands and drum and bugle corps in place of French horns, and can also be used to play French horn parts in concert bands and orchestras.

<span class="mw-page-title-main">Tenor saxophone</span> Type of saxophone

The tenor saxophone is a medium-sized member of the saxophone family, a group of instruments invented by Adolphe Sax in the 1840s. The tenor and the alto are the two most commonly used saxophones. The tenor is pitched in the key of B♭ (while the alto is pitched in the key of E♭), and written as a transposing instrument in the treble clef, sounding an octave and a major second lower than the written pitch. Modern tenor saxophones which have a high F♯ key have a range from A♭2 to E5 (concert) and are therefore pitched one octave below the soprano saxophone. People who play the tenor saxophone are known as "tenor saxophonists", "tenor sax players", or "saxophonists".

<span class="mw-page-title-main">Baritone saxophone</span> Lowest-pitched saxophone in common use

The baritone saxophone is a member of the saxophone family of instruments, larger than the tenor saxophone, but smaller than the bass. It is the lowest-pitched saxophone in common use - the bass, contrabass and subcontrabass saxophones are relatively uncommon. Like all saxophones, it is a single-reed instrument. It is commonly used in concert bands, chamber music, military bands, big bands, and jazz combos. It can also be found in other ensembles such as rock bands and marching bands. Modern baritone saxophones are pitched in E♭.

The soprano saxophone is a higher-register variety of the saxophone, a woodwind instrument invented in the 1840s. The soprano is the third-smallest member of the saxophone family, which consists of the sopranissimo, sopranino, soprano, alto, tenor, baritone, bass, contrabass saxophone and tubax. Soprano saxophones are the smallest and thus highest-pitched saxophone in common use.

C. G. Conn Ltd., sometimes called Conn Instruments or commonly just Conn, is a former American manufacturer of musical instruments incorporated in 1915. It bought the production facilities owned by Charles Gerard Conn, a major figure in early manufacture of brasswinds and saxophones in the USA. Its early business was based primarily on brass instruments, which were manufactured in Elkhart, Indiana. During the 1950s the bulk of its sales revenue shifted to electric organs. In 1969 the company was sold in bankruptcy to the Crowell-Collier-MacMillan publishing company. Conn was divested of its Elkhart production facilities in 1970, leaving remaining production in satellite facilities and contractor sources.

Conn-Selmer, Inc. is an American manufacturer of musical instruments for concert bands, marching bands and orchestras. It is a wholly owned subsidiary of Steinway Musical Instruments and was formed in 2003 by combining the Steinway properties, The Selmer Company and United Musical Instruments.

<span class="mw-page-title-main">Sopranissimo saxophone</span> Type of saxophone

The sopranissimo saxophone is the smallest member of the saxophone family. It is pitched in B♭, one octave above the soprano saxophone. Because of the difficulties in building such a small instrument—the soprillo is 30 cm (12 in) long, 33 cm (13 in) with the mouthpiece—it is only since the mid-2010s that a true sopranissimo saxophone has been able to be produced. The keywork only extends to a written E♭6, rather than F, F♯, or sometimes G, like most saxophones, and the upper octave key has to be placed on the mouthpiece.

<span class="mw-page-title-main">Holton (Leblanc)</span>

Holton is a brand owned by the Conn-Selmer division of Steinway Musical Instruments. The original business was a used instrument shop began in 1898 by Frank Holton, a trombone player, in Chicago, Illinois. The firm built brass instruments for ten years in Chicago, then in Elkhorn, Wisconsin from 1918 until 2008, when production of Holton-branded instruments moved to Eastlake, Ohio. The business remained independent until it was acquired by Leblanc in 1964. Leblanc was acquired by Conn-Selmer in 2004 and its properties became subsidiaries of Conn-Selmer.

Leon Brown "Chu" Berry was an American jazz tenor saxophonist during the 1930s.

The Buescher Band Instrument Company was a manufacturer of musical instruments in Elkhart, Indiana, from 1894 to 1963. The company was acquired by the H&A Selmer Company in 1963. Selmer retired the Buescher brand in 1983.

<span class="mw-page-title-main">Sigurd Raschèr</span> American saxophonist

Sigurd Manfred Raschèr was an American saxophonist born in Germany. He became an important figure in the development of the 20th century repertoire for the classical saxophone.

<span class="mw-page-title-main">Julius Keilwerth</span> German saxophone manufacturer

The Julius Keilwerth company is a German saxophone manufacturer, established in 1925.

<span class="mw-page-title-main">Mezzo-soprano saxophone</span>

The mezzo-soprano saxophone, sometimes called the F alto saxophone, is an instrument in the saxophone family. It is in the key of F, pitched a whole tone above the alto saxophone. Its size and the sound are similar to the E♭ alto, although the upper register sounds more like a B♭ soprano. Very few mezzo-sopranos exist—they were only produced in 1928 and 1929 by the C.G. Conn company. They were not popular and did not sell widely, as their production coincided with the Wall Street Crash of 1929 and the Great Depression. Harsh economic conditions forced Conn to reduce the range of saxophones they produced to the most popular models.

Leblanc, Inc. was a musical instruments manufacturing company based in Kenosha, Wisconsin. The company was a woodwind instrument manufacturer known mainly for its clarinets. In 2004 the firm was sold to Conn-Selmer, a division of Steinway Musical Instruments. As a result, Leblanc ceased to exist as an independent operation, becoming a brand.

<span class="mw-page-title-main">King Musical Instruments</span> Musical instrument manufacturing company

King Musical Instruments is a former musical instrument manufacturing company located in Cleveland, Ohio, that used the trade name King for its instruments. In 1965 the company was acquired by the Seeburg Corporation of Eastlake, Ohio, and the name changed to "King Musical Instruments".

References

  1. ↑ Cottrell, Stephen (2012). The Saxophone. Yale Musical Instrument Series. New Haven: Yale University Press. p. 84. ISBN   978-0-300100-41-9. LCCN   2012028346. OCLC   844030644. OL   25377233M. Wikidata   Q113952716.
  2. ↑ "Aquilasax.com". Aquilasax.com. Archived from the original on 9 March 2018. Retrieved 19 May 2014. Aquilasax.com has ceased operating since June 2015 (formerly China since 2007) [...] I will keep this website open as an info site as long as funds allow.
  3. ↑ "Jazzfuel.com" . Retrieved 11 May 2023.
  4. ↑ Prominent Web Design. "Saxophone Mouthpiece Tip Opening Chart". Beechler.com. Retrieved 19 May 2014.
  5. ↑ JunkDude Music - Ralph Morgan Mouthpieces Archived 29 October 2007 at the Wayback Machine
  6. ↑ "Martin C Melody saxophone review". Shwoodwind.co.uk. 30 September 2005. Retrieved 19 May 2014.
  7. ↑ "King C Melody saxophone review". Shwoodwind.co.uk. 23 April 2007. Retrieved 19 May 2014.
  8. ↑ "Why are there C melody saxophones ?". Cmelodysax.co.uk. Retrieved 19 May 2014.
  9. ↑ c melody » C Melody Archived 16 January 2009 at the Wayback Machine
  10. ↑ See Braxton's Seven Compositions (Trio) 1989 , hatART (1990)
  11. ↑ See Lovano's album Quartets: Live at the Village Vanguard
  12. ↑ See Karen Mantler's Pet Project (Virgin Classics); and Farewell (ECM/XtraWATT)
  13. ↑ "Jim Schmidt'S Contralto". Web.archive.org. 19 July 2008. Archived from the original on 19 July 2008. Retrieved 19 May 2014.
  14. ↑ "Welcome to Aquilasax!". Aquilasax.com. Archived from the original on 9 March 2018. Retrieved 14 August 2016.
  15. ↑ "Thomann CMS-600 L C- Melody Sax". Musikhaus Thomann. Retrieved 22 November 2017.
  16. ↑ "Sakkusu C-Melody Saxophone Review". cafesaxophone.com. Retrieved 14 August 2016.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.