Charge ordering

Last updated

Charge ordering (CO) is a (first- or second-order) phase transition occurring mostly in strongly correlated materials such as transition metal oxides or organic conductors. Due to the strong interaction between electrons, charges are localized on different sites leading to a disproportionation and an ordered superlattice. It appears in different patterns ranging from vertical to horizontal stripes to a checkerboard–like pattern [1] [2] , and it is not limited to the two-dimensional case. The charge order transition is accompanied by symmetry breaking and may lead to ferroelectricity. It is often found in close proximity to superconductivity and colossal magnetoresistance.

Contents

Charge order patterns ChargeOrderPattern.jpg
Charge order patterns


This long range order phenomena was first discovered in magnetite (Fe3O4) by Verwey in 1939. [3] [4] He observed an increase of the electrical resistivity by two orders of magnitude at TCO=120K, suggesting a phase transition which is now well known as the Verwey transition. He was the first to propose the idea of an ordering process in this context. The charge ordered structure of magnetite was solved in 2011 by a group led by Paul Attfield with the results published in Nature . [5] Periodic lattice distortions associated with charge order were later mapped in the manganite lattice to reveal striped domains containing topological disorder. [6]

Theoretical description

The extended one-dimensional Hubbard model delivers a good description of the charge order transition with the on-site and nearest neighbor Coulomb repulsion U and V. It emerged that V is a crucial parameter and important for developing the charge order state. Further model calculations try to take the temperature and an interchain interaction into account. [7] The extended Hubbard model for a single chain including inter-site and on-site interaction V and U as well as the parameter for a small dimerization which can be typically found in the (TMTTF)2X compounds is presented as follows:

where t describes the transfer integral or the kinetic energy of the electron and and are the creation and annihilation operator, respectively, for an electron with the spin at the th or th site. denotes the density operator. For non-dimerized systems, can be set to zero Normally, the on-site Coulomb repulsion U stays unchanged only t and V can vary with pressure.

Examples

Organic conductors

Organic conductors consist of donor and acceptor molecules building separated planar sheets or columns. The energy difference in the ionization energy acceptor and the electron affinity of the donor leads to a charge transfer and consequently to free carriers whose number is normally fixed. The carriers are delocalized throughout the crystal due to the overlap of the molecular orbitals being also reasonable for the high anisotropic conductivity. That is why it will be distinct between different dimensional organic conductors. They possess a huge variety of ground states, for instance, charge ordering, spin-Peierls, spin-density wave, antiferromagnetic state, superconductivity, charge-density wave to name only some of them. [8] [9]

Quasi-one-dimensional organic conductors

The model system of one-dimensional conductors is the Bechgaard-Fabre salts family, (TMTTF)2X and (TMTSF)2X, where in the latter one sulfur is substituted by selenium leading to a more metallic behavior over a wide temperature range and exhibiting no charge order. While the TMTTF compounds depending on the counterions X show the conductivity of a semiconductor at room temperature and are expected to be more one-dimensional than (TMTSF)2X. [10] The transition temperature TCO for the TMTTF subfamily was registered over two order of magnitudes for the centrosymmetric anions X = Br, PF6, AsF6, SbF6 and the non-centrosymmetric anions X= BF4 and ReO4. [11] In the middle of the eighties, a new "structureless transition" was discovered by Coulon et al. [12] conducting transport and thermopower measurements. They observed a suddenly rise of the resistivity and the thermopower at TCO while x-ray measurements showed no evidence for a change in the crystal symmetry or a formation of a superstructure. The transition was later confirmed by 13C-NMR [13] and dielectric measurements.

Different measurements under pressure reveal a decrease of the transition temperature TCO by increasing the pressure. According to the phase diagram of that family, an increasing pressure applied to the TMTTF compounds can be understood as a shift from the semiconducting state (at room temperature) to a higher dimensional and metallic state as you can find for TMTSF compounds without a charge order state.

Anion XTCO (K)
(TMTTF)2Br28
(TMTTF)2PF670
(TMTTF)2AsF6100.6
(TMTTF)2SbF6154
(TMTTF)2BF483
(TMTTF)2ReO4227.5
(DI-DCNQI)2Ag220
TTM-TTPI3120

Quasi-two-dimensional organic conductors

A dimensional crossover can be induced not only by applying pressure, but also be substituting the donor molecules by other ones. From a historical point of view, the main aim was to synthesize an organic superconductor with a high TC. The key to reach that aim was to increase the orbital overlap in two dimension. With the BEDT-TTF and its huge π-electron system, a new family of quasi-two-dimensional organic conductors were created exhibiting also a great variety of the phase diagram and crystal structure arrangements.
At the turn of the 20th century, first NMR measurements on the θ-(BEDT-TTF)2RbZn(SCN)4 compound uncovered the known metal to insulator transition at TCO= 195 K as an charge order transition. [14]

CompoundTCO (K)
α-(BEDT-TTF)2I3135
θ-(BEDT-TTF)2TlCo(SCN)4240
θ-(BEDT-TTF)2TlZn(SCN)4165
θ-(BEDT-TTF)2RbZn(SCN)4195
θ-(BEDT-TTF)2RbCo(SCN)4190

Transition metal oxides

The most prominent transition metal oxide revealing a CO transition is the magnetite Fe3O4 being a mixed-valence oxide where the iron atoms have a statistical distribution of Fe3+ and Fe2+ above the transition temperature. Below 122 K, the combination of 2+ and 3+ species arrange themselves in a regular pattern, whereas above that transition temperature (also referred to as the Verwey temperature in this case) the thermal energy is large enough to destroy the order. [15]

Compound [16] TCO (K)
Y0.5NiO3582
YBaCo2O5220
CaFeO3290
Ba3NaRu2O9210
TbBaFe2O5282
Fe3O4123
Li0.5MnO2290
LaSrMn3O7210
Na0.25Mn3O6176
YBaMn2O6498
TbBaMn2O6473
PrCaMn2O6230
α'-NaV2O534

Alkali metal oxides

The alkali metal oxides rubidium sesquioxide (Rb4O6) and caesium sesquioxide (Cs4O6) display charge ordering. [17]

Detection of charge order

Related Research Articles

<span class="mw-page-title-main">Exciton</span> Quasiparticle which is a bound state of an electron and an electron hole

An exciton is a bound state of an electron and an electron hole which are attracted to each other by the electrostatic Coulomb force. It is an electrically neutral quasiparticle that exists in insulators, semiconductors and some liquids. The exciton is regarded as an elementary excitation of condensed matter that can transport energy without transporting net electric charge.

The quantum Hall effect is a quantized version of the Hall effect which is observed in two-dimensional electron systems subjected to low temperatures and strong magnetic fields, in which the Hall resistance Rxy exhibits steps that take on the quantized values

Electrical resistivity is a fundamental property of a material that measures how strongly it resists electric current. A low resistivity indicates a material that readily allows electric current. Resistivity is commonly represented by the Greek letter ρ (rho). The SI unit of electrical resistivity is the ohm-meter (Ω⋅m). For example, if a 1 m3 solid cube of material has sheet contacts on two opposite faces, and the resistance between these contacts is 1 Ω, then the resistivity of the material is 1 Ω⋅m.

In physics, mean free path is the average distance over which a moving particle travels before substantially changing its direction or energy, typically as a result of one or more successive collisions with other particles.

<span class="mw-page-title-main">Ferrimagnetism</span> Type of magnetic phenomenon

A ferrimagnetic material is a material that has populations of atoms with opposing magnetic moments, as in antiferromagnetism, but these moments are unequal in magnitude so a spontaneous magnetization remains. This can for example occur when the populations consist of different atoms or ions (such as Fe2+ and Fe3+).

The Ising model, named after the physicists Ernst Ising and Wilhelm Lenz, is a mathematical model of ferromagnetism in statistical mechanics. The model consists of discrete variables that represent magnetic dipole moments of atomic "spins" that can be in one of two states. The spins are arranged in a graph, usually a lattice, allowing each spin to interact with its neighbors. Neighboring spins that agree have a lower energy than those that disagree; the system tends to the lowest energy but heat disturbs this tendency, thus creating the possibility of different structural phases. The model allows the identification of phase transitions as a simplified model of reality. The two-dimensional square-lattice Ising model is one of the simplest statistical models to show a phase transition.

<span class="mw-page-title-main">Drude model</span> Model of electrical conduction

The Drude model of electrical conduction was proposed in 1900 by Paul Drude to explain the transport properties of electrons in materials. Basically, Ohm's law was well established and stated that the current J and voltage V driving the current are related to the resistance R of the material. The inverse of the resistance is known as the conductance. When we consider a metal of unit length and unit cross sectional area, the conductance is known as the conductivity, which is the inverse of resistivity. The Drude model attempts to explain the resistivity of a conductor in terms of the scattering of electrons by the relatively immobile ions in the metal that act like obstructions to the flow of electrons.

In solid-state physics, the electron mobility characterises how quickly an electron can move through a metal or semiconductor when pulled by an electric field. There is an analogous quantity for holes, called hole mobility. The term carrier mobility refers in general to both electron and hole mobility.

<span class="mw-page-title-main">Seebeck coefficient</span> Measure of voltage induced by change of temperature

The Seebeck coefficient of a material is a measure of the magnitude of an induced thermoelectric voltage in response to a temperature difference across that material, as induced by the Seebeck effect. The SI unit of the Seebeck coefficient is volts per kelvin (V/K), although it is more often given in microvolts per kelvin (μV/K).

In chemistry, a charge-transfer (CT) complex or electron-donor-acceptor complex describes a type of supramolecular assembly of two or more molecules or ions. The assembly consists of two molecules that self-attract through electrostatic forces, i.e., one has at least partial negative charge and the partner has partial positive charge, referred to respectively as the electron acceptor and electron donor. In some cases, the degree of charge transfer is "complete", such that the CT complex can be classified as a salt. In other cases, the charge-transfer association is weak, and the interaction can be disrupted easily by polar solvents.

In physics, the Wiedemann–Franz law states that the ratio of the electronic contribution of the thermal conductivity (κ) to the electrical conductivity (σ) of a metal is proportional to the temperature (T).

<span class="mw-page-title-main">Mott insulator</span> Materials classically predicted to be conductors, that are actually insulators

Mott insulators are a class of materials that are expected to conduct electricity according to conventional band theories, but turn out to be insulators. These insulators fail to be correctly described by band theories of solids due to their strong electron–electron interactions, which are not considered in conventional band theory. A Mott transition is a transition from a metal to an insulator, driven by the strong interactions between electrons. One of the simplest models that can capture Mott transition is the Hubbard model.

<span class="mw-page-title-main">Spin density wave</span>

Spin-density wave (SDW) and charge-density wave (CDW) are names for two similar low-energy ordered states of solids. Both these states occur at low temperature in anisotropic, low-dimensional materials or in metals that have high densities of states at the Fermi level . Other low-temperature ground states that occur in such materials are superconductivity, ferromagnetism and antiferromagnetism. The transition to the ordered states is driven by the condensation energy which is approximately where is the magnitude of the energy gap opened by the transition.

An organic superconductor is a synthetic organic compound that exhibits superconductivity at low temperatures.

The quantum Heisenberg model, developed by Werner Heisenberg, is a statistical mechanical model used in the study of critical points and phase transitions of magnetic systems, in which the spins of the magnetic systems are treated quantum mechanically. It is related to the prototypical Ising model, where at each site of a lattice, a spin represents a microscopic magnetic dipole to which the magnetic moment is either up or down. Except the coupling between magnetic dipole moments, there is also a multipolar version of Heisenberg model called the multipolar exchange interaction.

The Hammett equation in organic chemistry describes a linear free-energy relationship relating reaction rates and equilibrium constants for many reactions involving benzoic acid derivatives with meta- and para-substituents to each other with just two parameters: a substituent constant and a reaction constant. This equation was developed and published by Louis Plack Hammett in 1937 as a follow-up to qualitative observations in a 1935 publication.

<span class="mw-page-title-main">Tetrathiafulvalene</span> Organosulfuric compound with formula C6H4S4

Tetrathiafulvalene is an organosulfur compound with the formula 2. Studies on this heterocyclic compound contributed to the development of molecular electronics. TTF is related to the hydrocarbon fulvalene, (C5H4)2, by replacement of four CH groups with sulfur atoms. Over 10,000 scientific publications discuss TTF and its derivatives.

A Peierls transition or Peierls distortion is a distortion of the periodic lattice of a one-dimensional crystal. Atomic positions oscillate, so that the perfect order of the 1-D crystal is broken.

The Fulde–Ferrell–Larkin–Ovchinnikov (FFLO) phase can arise in a superconductor in large magnetic field. Among its characteristics are Cooper pairs with nonzero total momentum and a spatially non-uniform order parameter, leading to normal conducting areas in the superconductor.

In physics, the total position-spread (TPS) tensor is a quantity originally introduced in the modern theory of electrical conductivity. In the case of molecular systems, this tensor measures the fluctuation of the electrons around their mean positions, which corresponds to the delocalization of the electronic charge within a molecular system. The total position-spread can discriminate between metals and insulators taking information from the ground state wave function. This quantity can be very useful as an indicator to characterize Intervalence charge transfer processes, the bond nature of molecules, and Metal–insulator transition.

References

  1. Wise, W.D.; et al. (2008). "Charge-density-wave origin of cuprate checkerboard visualized by scanning tunnelling microscopy". PNAS. 4 (9): 696–699. arXiv: 0806.0203 . Bibcode:2008NatPh...4..696W. doi:10.1038/nphys1021. S2CID   14314484.
  2. Savitzky, B.; et al. (2017). "Bending and breaking of stripes in a charge ordered manganite". Nature Communications. 8 (1): 1883. arXiv: 1707.00221 . Bibcode:2017NatCo...8.1883S. doi:10.1038/s41467-017-02156-1. PMC   5709367 . PMID   29192204.
  3. Verwey, E.J.W. (1939). "Electronic conduction of magnetite (Fe3O4) and its transition point at low temperatures". Nature. 144 (3642): 327–328. Bibcode:1939Natur.144..327V. doi:10.1038/144327b0. S2CID   41925681.
  4. Verwey, E.J.W.; Haayman, P.W. (1941). "Electronic conductivity and transition point of magnetite (Fe3O4)". Physica. 8 (9): 979–987. Bibcode:1941Phy.....8..979V. doi:10.1016/S0031-8914(41)80005-6.
  5. Senn, M. S.; Wright, J. P.; Attfield, J. P. (2011). "Charge order and three-site distortions in the Verwey structure of magnetite" (PDF). Nature. 481 (7380): 173–6. Bibcode:2012Natur.481..173S. doi:10.1038/nature10704. hdl: 20.500.11820/1b3bb558-52d5-419f-9944-ab917dc95f5e . PMID   22190035. S2CID   4425300.
  6. El Baggari, I.; et al. (2017). "Nature and evolution of incommensurate charge order in manganites visualized with cryogenic scanning transmission electron microscopy". PNAS. 115 (7): 1–6. arXiv: 1708.08871 . Bibcode:2018PNAS..115.1445E. doi: 10.1073/pnas.1714901115 . PMC   5816166 . PMID   29382750.
  7. Yoshioka, H.; Tsuchuuzu, M; Seo, H. (2007). "Charge-Ordered State versus Dimer-Mott Insulator at Finite Temperatures". Journal of the Physical Society of Japan. 76 (10): 103701. arXiv: 0708.0910 . Bibcode:2007JPSJ...76j3701Y. doi:10.1143/JPSJ.76.103701. S2CID   117742575.
  8. Ishiguro, T. (1998). Organic Superconductors . Berlin Heidelberg New York: Springer-Verlag. ISBN   978-3-540-63025-8.
  9. Toyota, N. (2007). Low-dimensional Molecular Metals. Berlin Heidelberg: Springer-Verlag. ISBN   978-3-540-49574-1.
  10. Jeromé, D. (1991). "The Physics of Organic Superconductors". Science. 252 (5012): 1509–1514. Bibcode:1991Sci...252.1509J. doi:10.1126/science.252.5012.1509. PMID   17834876. S2CID   220096422.
  11. Nad, F.; Monceau, P. (2006). "Dielectric response of the charge ordered state in quasi-one-dimensional organic conductors". Journal of the Physical Society of Japan. 75 (5): 051005. Bibcode:2006JPSJ...75e1005N. doi:10.1143/JPSJ.75.051005.
  12. Coulon, C.; Parkin, S.S.P.; Laversanne, R. (1985). "STRUCTURELESS TRANSITION AND STRONG LOCALIZATION EFFECTS IN BIS-TETRAMETHYLTETRAHTHIAFULVALENIUM SALTS [(TMTTF)2X]". Physical Review B. 31 (6): 3583–3587. Bibcode:1985PhRvB..31.3583C. doi:10.1103/PhysRevB.31.3583. PMID   9936250.
  13. Chow, D.S.; et al. (2000). "Charge Ordering in the TMTTF Family of Molecular Conductors". Physical Review Letters. 85 (8): 1698–1701. arXiv: cond-mat/0004106 . Bibcode:2000PhRvL..85.1698C. doi:10.1103/PhysRevLett.85.1698. PMID   10970592. S2CID   34926882.
  14. Miyagawa, K.; Kawamoto, A.; Kanoda, K. (2000). "Charge ordering in a quasi-two-dimensional organic conductor". Physical Review B. 62 (12): R7679. Bibcode:2000PhRvB..62.7679M. doi:10.1103/PhysRevB.62.R7679.
  15. Rao, C. N. R. (1997). "Materials Science: Charge Ordering in Manganates". Science. 276 (5314): 911–912. doi:10.1126/science.276.5314.911. S2CID   94506436.
  16. Attfield, J.P. (2006). "Charge ordering in transition metal oxides". Solid State Sciences. 8 (8): 861–867. Bibcode:2006SSSci...8..861A. doi:10.1016/j.solidstatesciences.2005.02.011.
  17. Colman, Ross H.; Okur, H. Esma; Kockelmann, Winfried; Brown, Craig M.; Sans, Annette; Felser, Claudia; Jansen, Martin; Prassides, Kosmas (2019-10-21). "Elusive Valence Transition in Mixed-Valence Sesquioxide Cs4O6". Inorganic Chemistry. American Chemical Society (ACS). 58 (21): 14532–14541. doi:10.1021/acs.inorgchem.9b02122. ISSN   0020-1669. PMC   7880551 . PMID   31633914.
  18. Coulon, C.; Lalet, G.; Pouget, J.-P.; Foury-Leylekian, P.; Moradpour, A. (2007). "Anisotropic conductivity and charge ordering in (TMTTF)(2)X salts probed by ESR". Physical Review B. 76 (8): 085126. Bibcode:2007PhRvB..76h5126C. doi:10.1103/PhysRevB.76.085126.
  19. Dressel, M.; Drichko, N. (2004). "Optical Properties of Two-Dimensional Organic Conductors: Signatures of Charge Ordering and Correlation Effects". Chemical Reviews. 104 (11): 5689–5715. doi:10.1021/cr030642f. PMID   15535665.