Chemical bath deposition

Last updated January 20, 2024

Chemical Bath Deposition, also called Chemical Solution Deposition^[1] and CBD, is a method of thin-film deposition (solids forming from a solution or gas), using an aqueous precursor solution.^[1] Chemical Bath Deposition typically forms films using heterogeneous nucleation (deposition or adsorption of aqueous ions onto a solid substrate),^[2] to form homogeneous thin films of metal chalcogenides (mostly oxides, sulfides, and selenides) ^[1] and many less common ionic compounds.^[1]^[3] Chemical Bath Deposition produces films reliably, using a simple process with little infrastructure, at low temperature (<100˚C), and at low cost.^[1] Furthermore, Chemical Bath Deposition can be employed for large-area batch processing or continuous deposition. Films produced by CBD are often used in semiconductors, photovoltaic cells, and supercapacitors, and there is increasing interest in using Chemical Bath Deposition to create nanomaterials.^[1]^[4]

Uses

Chemical Bath Deposition is useful in industrial applications because it is extremely cheap, simple, and reliable compared to other methods of thin-film deposition, requiring only aqueous solution at (relatively) low temperatures and minimal infrastructure.^[1] The Chemical Bath Deposition process can easily be scaled up to large-area batch processing or continuous deposition.

Chemical Bath Deposition forms small crystals, which are less useful for semiconductors than the larger crystals created by other methods of thin-film deposition but are more useful for nano materials. However, films formed by Chemical Bath Deposition often have better photovoltaic properties (band electron gap) than films of the same substance formed by other methods.^[1]

Historical Uses

Chemical Bath Deposition has a long history but until recently was an uncommon method of thin-film deposition.^[1]

In 1865, Justus Liebig published an article describing the use of Chemical Bath Deposition to silver mirrors (to affix a reflective layer of silver to the back of glass to form a mirror),^[5] though in the modern day electroplating and vacuum deposition are more common.

Around WWII, lead sulfide (PbS) and lead selenide (PbSe) CBD films are thought to have been used in infrared detectors.^[1] These films are photoconductive when formed by Chemical Bath Deposition.^[1]

Chemical Bath Deposition has a long history in forming thin films used in semiconductors as well. However the small size of deposited crystals is not ideal for semiconductors and Chemical Bath Deposition is rarely used to manufacture semiconductors in the modern day.^[1]

Photovoltaics

Photovoltaic cells are the most common use of films deposited by Chemical Bath Deposition because many films have better photovoltaic properties when deposited via CBD than when deposited by other methods.^[1] This is because thin films formed by Chemical Bath Deposition exhibit greater size quantization, and therefore smaller crystals and a greater optical band gap, than thin films formed by other methods.^[1] These improved photovoltaic properties are why Cadmium Sulfide (CdS), a thin film common in photovoltaic cells, is the substance most commonly deposited by CBD and the substance most commonly investigated in CBD research papers.^[1]^[2]

Chemical Bath Deposition is also used to deposit buffer layers in photovoltaic cells because CBD does not damage the substrate.

Optics

Chemical Bath Deposition films can be made to absorb certain wavelengths and reflect or transmit others as desired. This is because films formed by Chemical Bath Deposition have an electronic bandgap which can be precisely controlled. This selective transmission can be used for anti-reflection and anti-dazzling coatings, solar thermal applications, optical filters, polarizers, total reflectors, etc.^[1] The films deposited by Chemical Bath Deposition have possible applications in anti-reflection, anti-dazzling, thermal control widow coatings, optical filters, total reflectors, poultry protection and warming coatings, light emitting diodes, solar cell fabrication and varistors.^{[ citation needed ]}

Nanomaterials

Chemical Bath Deposition or electroless deposition has great applications in the field of nanomaterials,^[1] because the small crystal size enables formation on the nanometer scale, because the properties and nanostructure of Chemical Bath Deposition films can be precisely controlled, and because the uniform thickness, composition, and geometry of films deposited by Chemical Bath Deposition allows the film to retain the structure of the substrate.^[1] The low cost and high reliability of Chemical Bath Deposition even on the nanometer scale is unlike any other thin-film deposition technique. Chemical bath deposition can be used to produce polycrystalline and epitaxial films, porous networks, nanorods, superlattices, and composites.^[4]

Process

Chemical Bath Deposition relies on creating a solution such that deposition (changing from an aqueous to a solid substance) will only occur on the substrate, using the method below:

Metal salts and (usually) chalcogenide precursors are added to water to form an aqueous solution containing the metal ions and chalcogenide ions which will form the compound to be deposited.
Temperature, pH, and concentration of salts are adjusted until the solution is in metastable supersaturation,^[2] that is until the ions are ready to deposit but can’t overcome the thermodynamic barrier to nucleation (forming solid crystals and precipitating out of the solution).^[1]
A substrate is introduced, which acts as a catalyst to nucleation, and the precursor ions adhere to onto the substrate forming a thin crystalline film by one of the two methods described below.

That is, the solution is in a state where the precursor ions or colloidal particles are ‘sticky’, but can’t 'stick' to each other. When the substrate is introduced, the precursor ions or particles stick to it and aqueous ions stick to solid ions, forming a solid compound—depositing to form crystalline films.

The pH, temperature, and composition of the film affect crystal size, and can be used to control the rate of formation and the structure of the film. Other factors affecting crystal size include agitation, illumination, and the thickness of the film upon which the crystal is deposited.^[1] Agitating the solution prevents the deposition of suspended colloidal crystals,^[6] creating a smoother and more homogenous film with a higher band gap energy. Agitation also affects the formation speed and the temperature at which formation occurs, and can alter the structure of the crystals deposited.^[6]

Unlike most other deposition processes, Chemical Bath Deposition tends to create a film of uniform thickness, composition, and geometry (lateral homogeneity) even on irregular (patterned or shaped) substrates because it, unlike other methods of deposition, is governed by surface chemistry. Ions adhere to all exposed surfaces of the substrate and crystals grow from those ions.^[2]^[7]

Ion-By-Ion Mechanism

In ion-by-ion deposition, aqueous precursor ions react directly to form the thin film.

The conditions are controlled such that few hydroxide ions form to prevent deposition (not on the substrate) or precipitation of insoluble metal hydroxide. Sometimes a complexing agent is used to prevent the formation of metal hydroxide.^[1] The metal salt and the chalcogenide salt disassociate to form precursor metal cations and chalcogenide anions, which are attracted to and adhere to the substrate by Van der Waals forces.^[8] Ions adhere to the substrate, and aqueous ions attach to the growing crystals, forming larger crystals. Thus, this method of deposition results in larger and less uniform crystals than the hydroxide-cluster mechanism.^[1]

An example of the reaction, depositing Cadmium Sulfide, is shown below:

${\ce {Cd^2+ + S^2- -> CdS}}$ (deposition) ^[1]^[7]^[8]

Hydroxide-Cluster Mechanism

Hydroxide-Cluster deposition occurs when hydroxide ions are present in the solution and usually results in smaller and more uniform crystals than ion-by-ion deposition.

When hydroxide ions are present in the solution in quantity, metal hydroxide ions form. The hydroxide ions act as ligands to the metal cations, forming insoluble colloidal clusters which are both dispersed throughout the solution and deposited onto the substrate. These clusters are attracted to the substrate by Van der Waals forces. The chalcogenide anions react with the metal hydroxide clusters, both dispersed and deposited, to form metal chalcogenide crystals. These crystals form the thin film, which has a structure similar to crystallite. In essence, the hydroxide ions acts as an intermediaries between the metal ions and the chalcogenide ions. Because each hydroxide cluster is a nucleation site, this deposition method usually results in smaller and more uniform crystals than ion-by-ion deposition.^[7]^[8]

An example of the chemical reaction, depositing Cadmium Sulfide, is shown below:

${\ce {nCd^2+ (aq) + 2nOH^- (aq) -> [Cd(OH)2] (s)}}$ (Formation of cadmium hydroxide cluster)

${\ce {[Cd(OH)2] n + nS^2- -> nCdS + 2n OH^-}}$ (Replacement reaction)^[8]

Substrate

Unlike other methods of thin-film deposition, most any substrate which is chemically stable in the aqueous solution can theoretically be used in Chemical Bath Deposition.^[1] The desired properties of the film usually dictate the choice of substrate; for example, when light transparency is desired various types of glass are used, and in photovoltaic applications ${\ce {CuInSe2}}$ is commonly used. Substrates can also be patterned with monolayers to direct the formation and structure of the thin films.^[1] Substrates such as carbonized melamine foam (CFM)^{[ citation needed ]} and acrylic acid (AA) hydrogels^[9] have also been used for some specialized applications.

Related Research Articles

<span class="mw-page-title-main">Chemical vapor deposition</span> Method used to apply surface coatings

Chemical vapor deposition (CVD) is a vacuum deposition method used to produce high-quality, and high-performance, solid materials. The process is often used in the semiconductor industry to produce thin films.

A borate is any of a range of boron oxyanions, anions containing boron and oxygen, such as orthoborate BO3−3, metaborate BO−2, or tetraborate B₄O2−7; or any salt of such anions, such as sodium metaborate, Na⁺[BO₂]⁻ and borax (Na⁺)₂[B₄O₇]²⁻. The name also refers to esters of such anions, such as trimethyl borate B(OCH₃)₃.

<span class="mw-page-title-main">Epitaxy</span> Crystal growth process relative to the substrate

Epitaxy refers to a type of crystal growth or material deposition in which new crystalline layers are formed with one or more well-defined orientations with respect to the crystalline seed layer. The deposited crystalline film is called an epitaxial film or epitaxial layer. The relative orientation(s) of the epitaxial layer to the seed layer is defined in terms of the orientation of the crystal lattice of each material. For most epitaxial growths, the new layer is usually crystalline and each crystallographic domain of the overlayer must have a well-defined orientation relative to the substrate crystal structure. Epitaxy can involve single-crystal structures, although grain-to-grain epitaxy has been observed in granular films. For most technological applications, single domain epitaxy, which is the growth of an overlayer crystal with one well-defined orientation with respect to the substrate crystal, is preferred. Epitaxy can also play an important role while growing superlattice structures.

Cadmium sulfide is the inorganic compound with the formula CdS. Cadmium sulfide is a yellow salt. It occurs in nature with two different crystal structures as the rare minerals greenockite and hawleyite, but is more prevalent as an impurity substituent in the similarly structured zinc ores sphalerite and wurtzite, which are the major economic sources of cadmium. As a compound that is easy to isolate and purify, it is the principal source of cadmium for all commercial applications. Its vivid yellow color led to its adoption as a pigment for the yellow paint "cadmium yellow" in the 18th century.

A thin film is a layer of material ranging from fractions of a nanometer (monolayer) to several micrometers in thickness. The controlled synthesis of materials as thin films is a fundamental step in many applications. A familiar example is the household mirror, which typically has a thin metal coating on the back of a sheet of glass to form a reflective interface. The process of silvering was once commonly used to produce mirrors, while more recently the metal layer is deposited using techniques such as sputtering. Advances in thin film deposition techniques during the 20th century have enabled a wide range of technological breakthroughs in areas such as magnetic recording media, electronic semiconductor devices, integrated passive devices, LEDs, optical coatings, hard coatings on cutting tools, and for both energy generation and storage. It is also being applied to pharmaceuticals, via thin-film drug delivery. A stack of thin films is called a multilayer.

Plating is a finishing process in which a metal is deposited on a surface. Plating has been done for hundreds of years; it is also critical for modern technology. Plating is used to decorate objects, for corrosion inhibition, to improve solderability, to harden, to improve wearability, to reduce friction, to improve paint adhesion, to alter conductivity, to improve IR reflectivity, for radiation shielding, and for other purposes. Jewelry typically uses plating to give a silver or gold finish.

Copper monosulfide is a chemical compound of copper and sulfur. It was initially thought to occur in nature as the dark indigo blue mineral covellite. However, it was later shown to be rather a cuprous compound, formula Cu⁺₃S(S₂). CuS is a moderate conductor of electricity. A black colloidal precipitate of CuS is formed when hydrogen sulfide, H₂S, is bubbled through solutions of Cu(II) salts. It is one of a number of binary compounds of copper and sulfur (see copper sulfide for an overview of this subject), and has attracted interest because of its potential uses in catalysis and photovoltaics.

Lead selenide (PbSe), or lead(II) selenide, a selenide of lead, is a semiconductor material. It forms cubic crystals of the NaCl structure; it has a direct bandgap of 0.27 eV at room temperature. A grey solid, it is used for manufacture of infrared detectors for thermal imaging. The mineral clausthalite is a naturally occurring lead selenide.

Atomic layer deposition (ALD) is a thin-film deposition technique based on the sequential use of a gas-phase chemical process; it is a subclass of chemical vapour deposition. The majority of ALD reactions use two chemicals called precursors. These precursors react with the surface of a material one at a time in a sequential, self-limiting, manner. A thin film is slowly deposited through repeated exposure to separate precursors. ALD is a key process in fabricating semiconductor devices, and part of the set of tools for synthesizing nanomaterials.

<span class="mw-page-title-main">Electroless deposition</span>

Electroless deposition (ED) or electroless plating is defined as the autocatalytic process through which metals and metal alloys are deposited onto conductive and nonconductive surfaces. These nonconductive surfaces include plastics, ceramics, and glass etc., which can then become decorative, anti-corrosive, and conductive depending on their final functions. Electroplating unlike electroless deposition only deposits on other conductive or semi-conductive materials when a external current is applied. Electroless deposition deposits metals onto 2D and 3D structures such as screws, nanofibers, and carbon nanotubes, unlike other plating methods such as Physical Vapor Deposition ( PVD), Chemical Vapor Deposition (CVD), and electroplating, which are limited to 2D surfaces. Commonly the surface of the substrate is characterized via pXRD, SEM-EDS, and XPS which relay set parameters based their final funtionality. These parameters are referred to a Key Performance Indicators crucial for a researcher’ or company's purpose. Electroless deposition continues to rise in importance within the microelectronic industry, oil and gas, and aerospace industry.

Cadmium oxide is an inorganic compound with the formula CdO. It is one of the main precursors to other cadmium compounds. It crystallizes in a cubic rocksalt lattice like sodium chloride, with octahedral cation and anion centers. It occurs naturally as the rare mineral monteponite. Cadmium oxide can be found as a colorless amorphous powder or as brown or red crystals. Cadmium oxide is an n-type semiconductor with a band gap of 2.18 eV at room temperature.

Indium(III) sulfide (Indium sesquisulfide, Indium sulfide (2:3), Indium (3+) sulfide) is the inorganic compound with the formula In₂S₃.

Vacuum deposition is a group of processes used to deposit layers of material atom-by-atom or molecule-by-molecule on a solid surface. These processes operate at pressures well below atmospheric pressure. The deposited layers can range from a thickness of one atom up to millimeters, forming freestanding structures. Multiple layers of different materials can be used, for example to form optical coatings. The process can be qualified based on the vapor source; physical vapor deposition uses a liquid or solid source and chemical vapor deposition uses a chemical vapor.

Thin-film solar cells are made by depositing one or more thin layers of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (µm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 µm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon.

<span class="mw-page-title-main">Copper indium gallium selenide solar cell</span>

A copper indium gallium selenide solar cell is a thin-film solar cell used to convert sunlight into electric power. It is manufactured by depositing a thin layer of copper indium gallium selenide solid solution on glass or plastic backing, along with electrodes on the front and back to collect current. Because the material has a high absorption coefficient and strongly absorbs sunlight, a much thinner film is required than of other semiconductor materials.

Transparent conducting films (TCFs) are thin films of optically transparent and electrically conductive material. They are an important component in a number of electronic devices including liquid-crystal displays, OLEDs, touchscreens and photovoltaics. While indium tin oxide (ITO) is the most widely used, alternatives include wider-spectrum transparent conductive oxides (TCOs), conductive polymers, metal grids and random metallic networks, carbon nanotubes (CNT), graphene, nanowire meshes and ultra thin metal films.

Ion layer gas reaction (ILGAR®) is a non-vacuum, thin-film deposition technique developed and patented by the group of Professor Dr. Christian-Herbert Fischer at the Helmholtz-Zentrum Berlin for materials and energy in Berlin, Germany. It is a sequential and cyclic process that enables the deposition of semiconductor thin films, mainly for photovoltaic applications, specially chalcopyrite absorber layers and buffer layers. The ILGAR technique was awarded as German High Tech Champion 2011 by the Fraunhofer Society.

Gallium(III) sulfide, Ga₂S₃, is a compound of sulfur and gallium, that is a semiconductor that has applications in electronics and photonics.

Hydrogen chalcogenides are binary compounds of hydrogen with chalcogen atoms. Water, the first chemical compound in this series, contains one oxygen atom and two hydrogen atoms, and is the most common compound on the Earth's surface.

<span class="mw-page-title-main">Chemosynthesis (nanotechnology)</span> Process in molecular nanotechnology

In molecular nanotechnology, chemosynthesis is any chemical synthesis where reactions occur due to random thermal motion, a class which encompasses almost all of modern synthetic chemistry. The human-authored processes of chemical engineering are accordingly represented as biomimicry of the natural phenomena above, and the entire class of non-photosynthetic chains by which complex molecules are constructed is described as chemo-.

References

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Hodes, Gary (2007-05-09). "Semiconductor and ceramic nanoparticle films deposited by chemical bath deposition". Physical Chemistry Chemical Physics. 9 (18): 2181–2196. Bibcode:2007PCCP....9.2181H. doi:10.1039/B616684A. ISSN 1463-9084. PMID 17487315.
1 2 3 4 Guire, Mark R. De; Bauermann, Luciana Pitta; Parikh, Harshil; Bill, Joachim (2013), Schneller, Theodor; Waser, Rainer; Kosec, Marija; Payne, David (eds.), "Chemical Bath Deposition", Chemical Solution Deposition of Functional Oxide Thin Films, Vienna: Springer, pp. 319–339, doi:10.1007/978-3-211-99311-8_14, ISBN 978-3-211-99311-8 , retrieved 2021-11-18
↑ Nair, P. K; Nair, M. T. S; Garcı́a, V. M; Arenas, O. L; Peña, A. Castillo, Y; Ayala, I. T; Gomezdaza, O; Sánchez, A; Campos, J; Hu, H; Suárez, R (1998-04-30). "Semiconductor thin films by chemical bath deposition for solar energy related applications". Solar Energy Materials and Solar Cells. 52 (3): 313–344. doi:10.1016/S0927-0248(97)00237-7. ISSN 0927-0248. S2CID 97624287.{{cite journal}}: CS1 maint: multiple names: authors list (link)
1 2 Switzer, Jay A.; Hodes, Gary (2010-10-01). "Electrodeposition and chemical bath deposition of functional nanomaterials". MRS Bulletin. 35 (10): 743–750. Bibcode:2010MRSBu..35..743S. doi:10.1557/S0883769400051253. ISSN 1938-1425. S2CID 137797980.
↑ Liebig, Justus (1856-01-01). "Ueber Versilberung und Vergoldung von Glas". Annalen der Chemie und Pharmacie. 98: 132–139. doi:10.1002/jlac.18560980112.
1 2 Tec-Yam, S.; Patiño, R.; Oliva, A. I. (2011-05-01). "Chemical bath deposition of CdS films on different substrate orientations". Current Applied Physics. 11 (3): 914–920. Bibcode:2011CAP....11..914T. doi:10.1016/j.cap.2010.12.016. ISSN 1567-1739.
1 2 3 Froment, Michel; Lincot, Daniel (1995-07-01). "Phase formation processes in solution at the atomic level: Metal chalcogenide semiconductors". Electrochimica Acta. 40 (10): 1293–1303. doi:10.1016/0013-4686(95)00065-M. ISSN 0013-4686.
1 2 3 4 Aida, M. S.; Hariech, S. (2020), Ikhmayies, Shadia Jamil (ed.), "Cadmium Sulfide Thin Films by Chemical Bath Deposition Technique", Advances in Energy Materials, Advances in Material Research and Technology, Cham: Springer International Publishing, pp. 49–75, doi:10.1007/978-3-030-50108-2_3, ISBN 978-3-030-50108-2, S2CID 226640144 , retrieved 2021-11-22
↑ Temel, Sinan; Gokmen, Fatma Ozge; Yaman, Elif (2019-12-18). "Antibacterial activity of ZnO nanoflowers deposited on biodegradable acrylic acid hydrogel by chemical bath deposition". Bulletin of Materials Science. 43 (1): 18. doi:10.1007/s12034-019-1967-1. ISSN 0973-7669. S2CID 209393032.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[:0-1] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Hodes, Gary (2007-05-09). "Semiconductor and ceramic nanoparticle films deposited by chemical bath deposition". Physical Chemistry Chemical Physics. 9 (18): 2181–2196. Bibcode:2007PCCP....9.2181H. doi:10.1039/B616684A. ISSN 1463-9084. PMID 17487315.

[:5-2] 1 2 3 4 Guire, Mark R. De; Bauermann, Luciana Pitta; Parikh, Harshil; Bill, Joachim (2013), Schneller, Theodor; Waser, Rainer; Kosec, Marija; Payne, David (eds.), "Chemical Bath Deposition", Chemical Solution Deposition of Functional Oxide Thin Films, Vienna: Springer, pp. 319–339, doi:10.1007/978-3-211-99311-8_14, ISBN 978-3-211-99311-8 , retrieved 2021-11-18

[3] Nair, P. K; Nair, M. T. S; Garcı́a, V. M; Arenas, O. L; Peña, A. Castillo, Y; Ayala, I. T; Gomezdaza, O; Sánchez, A; Campos, J; Hu, H; Suárez, R (1998-04-30). "Semiconductor thin films by chemical bath deposition for solar energy related applications". Solar Energy Materials and Solar Cells. 52 (3): 313–344. doi:10.1016/S0927-0248(97)00237-7. ISSN 0927-0248. S2CID 97624287.{{cite journal}}: CS1 maint: multiple names: authors list (link)

[:4-4] 1 2 Switzer, Jay A.; Hodes, Gary (2010-10-01). "Electrodeposition and chemical bath deposition of functional nanomaterials". MRS Bulletin. 35 (10): 743–750. Bibcode:2010MRSBu..35..743S. doi:10.1557/S0883769400051253. ISSN 1938-1425. S2CID 137797980.

[5] Liebig, Justus (1856-01-01). "Ueber Versilberung und Vergoldung von Glas". Annalen der Chemie und Pharmacie. 98: 132–139. doi:10.1002/jlac.18560980112.

[:6-6] 1 2 Tec-Yam, S.; Patiño, R.; Oliva, A. I. (2011-05-01). "Chemical bath deposition of CdS films on different substrate orientations". Current Applied Physics. 11 (3): 914–920. Bibcode:2011CAP....11..914T. doi:10.1016/j.cap.2010.12.016. ISSN 1567-1739.

[:2-7] 1 2 3 Froment, Michel; Lincot, Daniel (1995-07-01). "Phase formation processes in solution at the atomic level: Metal chalcogenide semiconductors". Electrochimica Acta. 40 (10): 1293–1303. doi:10.1016/0013-4686(95)00065-M. ISSN 0013-4686.

[:3-8] 1 2 3 4 Aida, M. S.; Hariech, S. (2020), Ikhmayies, Shadia Jamil (ed.), "Cadmium Sulfide Thin Films by Chemical Bath Deposition Technique", Advances in Energy Materials, Advances in Material Research and Technology, Cham: Springer International Publishing, pp. 49–75, doi:10.1007/978-3-030-50108-2_3, ISBN 978-3-030-50108-2, S2CID 226640144 , retrieved 2021-11-22

[9] Temel, Sinan; Gokmen, Fatma Ozge; Yaman, Elif (2019-12-18). "Antibacterial activity of ZnO nanoflowers deposited on biodegradable acrylic acid hydrogel by chemical bath deposition". Bulletin of Materials Science. 43 (1): 18. doi:10.1007/s12034-019-1967-1. ISSN 0973-7669. S2CID 209393032.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]