Chiral Potts model

Last updated

The chiral Potts model is a spin model on a planar lattice in statistical mechanics studied by Helen Au-Yang Perk and Jacques Perk, among others. It may be viewed as a generalization of the Potts model, and as with the Potts model, the model is defined by configurations which are assignments of spins to each vertex of a graph, where each spin can take one of values. To each edge joining vertices with assigned spins and , a Boltzmann weight is assigned. For this model, chiral means that . When the weights satisfy the Yang–Baxter equation, it is integrable, in the sense that certain quantities can be exactly evaluated.

Contents

For the integrable chiral Potts model, the weights are defined by a high genus curve, the chiral Potts curve. [1] [2] Unlike the other solvable models, [3] [4] whose weights are parametrized by curves of genus less or equal to one, so that they can be expressed in terms of trigonometric functions, rational functions for the genus zero case, or by theta functions for the genus 1 case, this model involves high genus theta functions, for which the theory is less well-developed.

The related chiral clock model, which was introduced in the 1980s by David Huse and Stellan Ostlund independently, is not exactly solvable, in contrast to the chiral Potts model.

The model

This model is out of the class of all previously known models and raises a host of unsolved questions which are related to some of the most intractable problems of algebraic geometry which have been with us for 150 years. The chiral Potts models are used to understand the commensurate-incommensurate phase transitions. [5] For N = 3 and 4, the integrable case was discovered in 1986 in Stony Brook and published the following year. [1] [6]

Self-dual case

The model is called self-dual if the Fourier transform of the weight function returns the same function. A special (genus 1) case had been solved in 1982 by Fateev and Zamolodchikov. [7] By removing certain restrictions of the work of Alcaraz and Santos, [8] a more general self-dual case of the integrable chiral Potts model was discovered. [1] The weight are given in product form [9] [10] and the parameters in the weight are shown to be on the Fermat curve, with genus greater than 1.

General case

The general solution for all k (the temperature variable) was found. [2] The weights were also given in product form and it was tested computationally (on Fortran) that they satisfy the star–triangle relation. The proof was published later. [11]

Results

Order parameter

From the series [5] [12] the order parameter was conjectured [13] to have the simple form

It took many years to prove this conjecture, as the usual corner transfer matrix technique could not be used, because of the higher genus curve. This conjecture was proven by Baxter in 2005 [14] [15] using functional equations and the "broken rapidity line" technique of Jimbo et al. [16] assuming two mild analyticity conditions of the type commonly used in the field of Yang–Baxter integrable models. Most recently, in a series of papers [17] [18] [19] [20] [21] [22] [23] an algebraic (Ising-like) way of obtaining the order parameter has been given, giving more insight into the algebraic structure.

Connection to six vertex model

In 1990 Bazhanov and Stroganov [24] showed that there exist L-operators (Lax operator) which satisfy the Yang–Baxter equation

where the 2 × 2 R-operator (R-matrix) is the six vertex model R-matrix (see Vertex model). The product of four chiral Potts weight S was shown to intertwine two L-operators as

This inspired a breakthrough, namely the functional relations for the transfer matrices of the chiral Potts models were discovered. [25]

Free energy and interfacial tension

Using these functional relations, Baxter was able to calculate the eigenvalues of the transfer matrix of the chiral Potts model, [26] and obtained the critical exponent for the specific heat α=1-2/N, which was also conjectured in reference 12. The interfacial tension was also calculated by him with the exponent μ=1/2+1/N. [27] [28]

Relation with knot theory

The integrable chiral Potts weights are given in product form [2] as

where is a primitive root of unity and we associate with each rapidity variable p three variables satisfying

It is easy to see that

which is similar to Reidemeister move I. It was also known that the weights satisfy the inversion relation,

This is equivalent to Reidemeister move II. The star-triangle relation

is equivalent to Reidemeister move III. These are shown in the figures below. [29]

Reidemeister Move I.png
Property of the Weights: Reidemeister Move I
Reidemeister Move II.png
Inversion Relation of the Weights: Reidemeister Move II
Reidemeister Move III.png
Star-triangle relation: Reidemeister Move III
Weights of the Integrable chiral Potts models Weights of The Chiral Potts Model.png
Weights of the Integrable chiral Potts models

See also

Related Research Articles

In mechanics and geometry, the 3D rotation group, often denoted SO(3), is the group of all rotations about the origin of three-dimensional Euclidean space under the operation of composition.

<span class="mw-page-title-main">Gamma distribution</span> Probability distribution

In probability theory and statistics, the gamma distribution is a two-parameter family of continuous probability distributions. The exponential distribution, Erlang distribution, and chi-squared distribution are special cases of the gamma distribution. There are two equivalent parameterizations in common use:

  1. With a shape parameter and a scale parameter .
  2. With a shape parameter and an inverse scale parameter , called a rate parameter.

In mathematics, the Hodge star operator or Hodge star is a linear map defined on the exterior algebra of a finite-dimensional oriented vector space endowed with a nondegenerate symmetric bilinear form. Applying the operator to an element of the algebra produces the Hodge dual of the element. This map was introduced by W. V. D. Hodge.

<span class="mw-page-title-main">Foliation</span> In mathematics, a type of equivalence relation on an n-manifold

In mathematics, a foliation is an equivalence relation on an n-manifold, the equivalence classes being connected, injectively immersed submanifolds, all of the same dimension p, modeled on the decomposition of the real coordinate space Rn into the cosets x + Rp of the standardly embedded subspace Rp. The equivalence classes are called the leaves of the foliation. If the manifold and/or the submanifolds are required to have a piecewise-linear, differentiable, or analytic structure then one defines piecewise-linear, differentiable, or analytic foliations, respectively. In the most important case of differentiable foliation of class Cr it is usually understood that r ≥ 1. The number p is called the dimension of the foliation and q = np is called its codimension.

The Gell-Mann matrices, developed by Murray Gell-Mann, are a set of eight linearly independent 3×3 traceless Hermitian matrices used in the study of the strong interaction in particle physics. They span the Lie algebra of the SU(3) group in the defining representation.

In linear algebra, a rotation matrix is a transformation matrix that is used to perform a rotation in Euclidean space. For example, using the convention below, the matrix

In rotordynamics, the rigid rotor is a mechanical model of rotating systems. An arbitrary rigid rotor is a 3-dimensional rigid object, such as a top. To orient such an object in space requires three angles, known as Euler angles. A special rigid rotor is the linear rotor requiring only two angles to describe, for example of a diatomic molecule. More general molecules are 3-dimensional, such as water, ammonia, or methane.

<span class="mw-page-title-main">Chiral model</span> Model of mesons in the massless quark limit

In nuclear physics, the chiral model, introduced by Feza Gürsey in 1960, is a phenomenological model describing effective interactions of mesons in the chiral limit (where the masses of the quarks go to zero), but without necessarily mentioning quarks at all. It is a nonlinear sigma model with the principal homogeneous space of a Lie group as its target manifold. When the model was originally introduced, this Lie group was the SU(N), where N is the number of quark flavors. The Riemannian metric of the target manifold is given by a positive constant multiplied by the Killing form acting upon the Maurer–Cartan form of SU(N).

A multipole expansion is a mathematical series representing a function that depends on angles—usually the two angles used in the spherical coordinate system for three-dimensional Euclidean space, . Similarly to Taylor series, multipole expansions are useful because oftentimes only the first few terms are needed to provide a good approximation of the original function. The function being expanded may be real- or complex-valued and is defined either on , or less often on for some other .

In general relativity, the Gibbons–Hawking–York boundary term is a term that needs to be added to the Einstein–Hilbert action when the underlying spacetime manifold has a boundary.

<span class="mw-page-title-main">Beta prime distribution</span> Probability distribution

In probability theory and statistics, the beta prime distribution is an absolutely continuous probability distribution. If has a beta distribution, then the odds has a beta prime distribution.

In mathematics, the spin representations are particular projective representations of the orthogonal or special orthogonal groups in arbitrary dimension and signature. More precisely, they are two equivalent representations of the spin groups, which are double covers of the special orthogonal groups. They are usually studied over the real or complex numbers, but they can be defined over other fields.

In mathematics and mathematical physics, raising and lowering indices are operations on tensors which change their type. Raising and lowering indices are a form of index manipulation in tensor expressions.

In mathematics, Racah polynomials are orthogonal polynomials named after Giulio Racah, as their orthogonality relations are equivalent to his orthogonality relations for Racah coefficients.

<span class="mw-page-title-main">Plate theory</span>

In continuum mechanics, plate theories are mathematical descriptions of the mechanics of flat plates that draw on the theory of beams. Plates are defined as plane structural elements with a small thickness compared to the planar dimensions. The typical thickness to width ratio of a plate structure is less than 0.1. A plate theory takes advantage of this disparity in length scale to reduce the full three-dimensional solid mechanics problem to a two-dimensional problem. The aim of plate theory is to calculate the deformation and stresses in a plate subjected to loads.

<span class="mw-page-title-main">Kirchhoff–Love plate theory</span>

The Kirchhoff–Love theory of plates is a two-dimensional mathematical model that is used to determine the stresses and deformations in thin plates subjected to forces and moments. This theory is an extension of Euler-Bernoulli beam theory and was developed in 1888 by Love using assumptions proposed by Kirchhoff. The theory assumes that a mid-surface plane can be used to represent a three-dimensional plate in two-dimensional form.

<span class="mw-page-title-main">Vibration of plates</span>

The vibration of plates is a special case of the more general problem of mechanical vibrations. The equations governing the motion of plates are simpler than those for general three-dimensional objects because one of the dimensions of a plate is much smaller than the other two. This permits a two-dimensional plate theory to give an excellent approximation to the actual three-dimensional motion of a plate-like object.

In the fields of dynamical systems and control theory, a fractional-order system is a dynamical system that can be modeled by a fractional differential equation containing derivatives of non-integer order. Such systems are said to have fractional dynamics. Derivatives and integrals of fractional orders are used to describe objects that can be characterized by power-law nonlocality, power-law long-range dependence or fractal properties. Fractional-order systems are useful in studying the anomalous behavior of dynamical systems in physics, electrochemistry, biology, viscoelasticity and chaotic systems.

Nonlinear mixed-effects models constitute a class of statistical models generalizing linear mixed-effects models. Like linear mixed-effects models, they are particularly useful in settings where there are multiple measurements within the same statistical units or when there are dependencies between measurements on related statistical units. Nonlinear mixed-effects models are applied in many fields including medicine, public health, pharmacology, and ecology.

Tau functions are an important ingredient in the modern mathematical theory of integrable systems, and have numerous applications in a variety of other domains. They were originally introduced by Ryogo Hirota in his direct method approach to soliton equations, based on expressing them in an equivalent bilinear form.

References

  1. 1 2 3 Au-Yang, Helen; McCoy, Barry M.; Perk, Jacques H. H.; Tang, Shuang; Yan, Mu-Lin (10 August 1987). "Commuting transfer matrices in the chiral Potts models: Solutions of star-triangle equations with genus>1". Physics Letters A. 123 (5): 219–223. doi:10.1016/0375-9601(87)90065-X. ISSN   0375-9601.
  2. 1 2 3 Baxter, R. J.; Perk, J. H. H.; Au-Yang, H. (28 March 1988). "New solutions of the star-triangle relations for the chiral potts model". Physics Letters A. 128 (3): 138–142. doi:10.1016/0375-9601(88)90896-1. ISSN   0375-9601 . Retrieved 10 July 2023.
  3. Baxter, Rodney J. (2007). Exactly solved models in statistical mechanics. Mineola, N.Y: Dover Publications, Inc. ISBN   978-0486462714.
  4. McCoy, Barry M. (2010). Advanced statistical mechanics. Oxford: Oxford university press. ISBN   978-0199556632.
  5. 1 2 S. Howes, L.P. Kadanoff and M. den Nijs (1983), Nuclear Physics B 215, 169.
  6. McCoy B. M., Perk J. H. H., Tang S. and Sah C. H. (1987), "Commuting transfer matrices for the 4 state self-dual chiral Potts model with a genus 3 uniformizing Fermat curve", Physics Letters A 125, 9–14.
  7. Fateev, V. A.; Zamolodchikov, A. B. (18 October 1982). "Self-dual solutions of the star-triangle relations in ZN-models". Physics Letters A. 92 (1): 37–39. doi:10.1016/0375-9601(82)90736-8. ISSN   0375-9601 . Retrieved 11 July 2023.
  8. Alcaraz, Francisco C.; Lima Santos, A. (24 November 1986). "Conservation laws for Z(N) symmetric quantum spin models and their exact ground state energies". Nuclear Physics B. 275 (3): 436–458. doi:10.1016/0550-3213(86)90608-5. ISSN   0550-3213.
  9. H. Au-Yang, B. M. McCoy, J. H. H. Perk, and S. Tang (1988), "Solvable models in statistical mechanics and Riemann surfaces of genus greater than one", in Algebraic Analysis, Vol. 1, M. Kashiwara and T. Kawai, eds., Academic Press, pp. 29–40.
  10. J.H.H. Perk (1987), "Star-triangle equations, quantum Lax pairs, and higher genus curves", in Proc. 1987 Summer Research Institute on Theta Functions, Proc. Symp. Pure Math., Vol. 49, part 1 (Am. Math. Soc., Providence, R.I., 1989), pp. 341–354.
  11. Au-Yang H and Perk J H H (1989). "Onsager's star-triangle equation: Master key to integrability", Proc. Taniguchi Symposium, Kyoto, October 1988, Advanced Studies in Pure Mathematics vol 19 (Tokyo: Kinokuniya–Academic) pp 57–94
  12. M. Henkel and J. Lacki, preprint Bonn-HE-85–22 and "Integrable chiral $Z_n$ quantum chains and a new class of trigonometric sums", Phys. Lett. 138A 105 (1989)
  13. Albertini G., McCoy B. M., Perk J. H. H. and Tang S. (1989), "Excitation spectrum and order parameter for the integrable N-state chiral Potts model", Nuclear Physics B 314, 741–763
  14. Baxter R. J. (2005), "Derivation of the order parameter of the chiral Potts model", Physical Review Letters, 94 130602 (3 pp) arXiv:cond-mat/0501227.
  15. Baxter R. J. (2005), "The order parameter of the chiral Potts model", Journal of Statistical Physics 120, 1–36: arXiv:cond-mat/0501226.
  16. Jimbo M., Miwa T. and Nakayashiki A. (1993), "Difference equations for the correlation functions of the eight-vertex model", Journal of Physics A : Math. Gen. 26, 2199–210: arXiv:hep-th/9211066.
  17. Baxter R. J. (2008) "Algebraic reduction of the Ising model", Journal of Statistical Physics 132, 959–82, arXiv:0803.4036;
  18. Baxter R. J. (2008), "A conjecture for the superintegrable chiral Potts model", Journal of Statistical Physics 132, 983–1000, arXiv:0803.4037;
  19. Baxter R J (2009), "Some remarks on a generalization of the superintegrable chiral Potts model", Journal of Statistical Physics 137, 798–813, arXiv:0906.3551;
  20. Baxter R. J. (2010), "Spontaneous magnetization of the superintegrable chiral Potts model: calculation of the determinant DPQ", Journal of Physics A 43, 145002 (16pp) arXiv:0912.4549.
  21. Baxter R. J. (2010), "Proof of the determinantal form of the spontaneous magnetization of the superintegrable chiral Potts model", Australian & New Zealand Industrial and Applied Mathematics Journal, 51 arXiv:1001.0281.
  22. Iorgov N., Pakuliak S., Shadura V., Tykhyy Yu and von Gehlen G. (2009), "Spin operator matrix elements in the superintegrable chiral Potts quantum chain", Journal of Statistical Physics 139, 743–68 arXiv:0912.5027.
  23. Au-Yang H and Perk J. H. H. (2011), "Spontaneous magnetization of the integrable chiral Potts model", Journal of Physics A 44, 445005 (20pp), arXiv:1003.4805.
  24. V. V. Bazhanov and Yu. G. Stroganov (1990), "Chiral Potts model as a descendant of the six-vertex model", Journal of Statistical Physics 59, pp 799–817.
  25. Baxter R. J., Bazhanov V. V. and Perk J. H. H. (1990), "Functional relations for transfer matrices of the chiral Potts model", International Journal of Modern Physics B 4, 803–70.
  26. Baxter R J (1991), "Calculation of the eigenvalues of the transfer matrix of the chiral Potts model", Proceeding of Fourth Asia Pacific Physics Conference (Singapore: World Scientific) pp 42–58.
  27. Baxter R. J. (1993), "Chiral Potts model with skewed boundary conditions", Journal of Statistical Physics 73, 461–95.
  28. Baxter R. J. (1994), "Interfacial tension of the chiral Potts model", Journal of Physics A 27, pp 1837–49.
  29. Au-Yang Helen, Perk H. H. Jacques (2016), arXiv:1601.01014