Circular section

Last updated
tri-axial ellipsoid with a circular section Ellipso-KSE0.svg
tri-axial ellipsoid with a circular section

In geometry, a circular section is a circle on a quadric surface (such as an ellipsoid or hyperboloid). It is a special plane section of the quadric, as this circle is the intersection with the quadric of the plane containing the circle.

Contents

Any plane section of a sphere is a circular section, if it contains at least 2 points. Any quadric of revolution contains circles as sections with planes that are orthogonal to its axis; it does not contain any other circles, if it is not a sphere. More hidden are circles on other quadrics, such as tri-axial ellipsoids, elliptic cylinders, etc. Nevertheless, it is true that:

Equivalently, all quadric surfaces contain circles except parabolic and hyperbolic cylinders and hyperbolic paraboloids.

If a quadric contains a circle, then every intersection of the quadric with a plane parallel to this circle is also a circle, provided it contains at least two points. Except for spheres, the circles contained in a quadric, if any, are all parallel to one of two fixed planes (which are equal in the case of a quadric of revolution).

Circular sections are used in crystallography. [1] [2] [3]

Using projective geometry

The circular sections of a quadric may be computed from the implicit equation of the quadric, as it is done in the following sections. They may also be characterised and studied by using synthetic projective geometry.

Let C be the intersection of a quadric surface Q and a plane P. In this section, Q and C are surfaces in the three-dimensional Euclidean space, which are extended to the projective space over the complex numbers. Under these hypotheses, the curve C is a circle if and only if its intersection with the plane at infinity is included in the ombilic (the curve at infinity of equation ).

The first case to be considered is when the intersection of Q with the plane at infinity consists of one or two real lines, that is when Q is either a hyperbolic paraboloid, a parabolic cylinder or a hyperbolic cylinder. In this case the points at infinity of C are real (intersection of a real plane with real lines). Thus the plane sections of Q cannot be circles (neither ellipses).

If Q is a sphere, its intersection with the plane at infinity is the ombilic, and all plane sections are circles.

If Q is a surface of revolution, its intersection with the ombilic consists of a pair of complex conjugate points (which are double points). A real plane contains these two points if and only if it is perpendicular to the axis of revolution. Thus the circular sections are the plane sections by a plane perpendicular to the axis, that have at least two real points.

In the other cases, the intersection of Q with the ombilic consists of two different pairs of complex conjugate points. As C is a curve of degree two, its intersection with the plane at infinity consists of two points, possibly equal. The curve C is thus a circle, if these two points are one of these two pairs of complex conjugate points on the ombilic. Each of these pairs defines a real line (passing through the points), which is the intersection of P with the plane at infinity. Thus, one has a circular section if and only C has at least two real points and P contains one of these lines at infinity (that is if P is parallel to one of two directions defined by these lines at infinity).

Determination of circular sections of a quadric

In order to find the planes, which contain circular sections of a given quadric, one uses the following statements:

(S:) If the common points of a quadric with a sphere are contained in a pair of planes, then the intersection curve consists of two circles.
(P:) If the intersection of a plane and a quadric is a circle, then any parallel plane, that contains at least two points of the quadric, intersects the quadric in a circle, too.

Hence the strategy for the detection of circular sections is:

1) Find a sphere that intersects the quadric in a pair of planes and
2) The planes that are parallel to the detected ones deliver the remaining circular sections.

Tri-axial ellipsoid

tri-axial ellipsoid with circular sections (blue and green) and the auxiliary sphere (red), which intersects the quadric in the blue circles Ellipso-KSE.svg
tri-axial ellipsoid with circular sections (blue and green) and the auxiliary sphere (red), which intersects the quadric in the blue circles
Ellipsoid intersected by spheres:
c
<
r
1
<
b
<
r
2
<
a
{\displaystyle c<{\color {seagreen}r_{1}}<{\color {blue}b}<{\color {purple}r_{2}}<a} Ellipsoid-KSE-4-5.svg
Ellipsoid intersected by spheres:

For the ellipsoid with equation

and the semi-axes one uses an auxiliary sphere with equation

The sphere's radius has to be chosen such that the intersection with the ellipsoid is contained in two planes through the origin. Multiplication of the ellipsoid's equation by and subtracting the sphere's equation yields:

This equation describes a pair of planes, if one of the 3 coefficients is zero. In case of or the equation is only fulfilled by either the x-axis or the z-axis. Only in case of one gets a pair of planes with equation

because only in this case the remaining coefficients have different signs (due to: ).

The diagram gives an impression of more common intersections between a sphere and an ellipsoid and highlights the exceptional circular case (blue).

If the values of the semi-axes are approaching, the two pencils of planes (and circles) approach either. For all the planes are orthogonal to the z-axis (rotation axis).

Proof of property (P)

Turning the ellipsoid around the y-axis such that one of the two circles (blue) lies in the x-y-plane results in a new equation of the ellipsoid:

For one gets , which has to be the equation of a circle. This is only true, if . The intersection of the ellipsoid by a plane with equation , (parallel to the x-y-plane) has the equation

.

This equation describes a circle or a point or the empty set. Center and radius of the circle can be found be completing the square.

Elliptical hyperboloid of one sheet

hyperboloid of one sheet Hyperboloid-1-KSE.svg
hyperboloid of one sheet

For the hyperboloid of one sheet with equation

analogously one gets for the intersection with the sphere the equation

Only for one gets a pair of planes:

Elliptical cylinder

elliptical cylinder Zylinder-KSE.svg
elliptical cylinder

For the elliptical cylinder with equation

one gets the equation

Only for one gets a pair of planes:

Elliptical paraboloid

elliptical paraboloid Paraboloid-KSE.svg
elliptical paraboloid

For the elliptical paraboloid with equation

one chooses a sphere containing the vertex (origin) and with center on the axis (z-axis) :

After elimination of the linear parts one gets the equation

Only for one gets a pair of planes :

Elliptical hyperboloid of two sheets

elliptical hyperboloid of two sheets Hyperboloid-2s-KSE.svg
elliptical hyperboloid of two sheets

The hyperboloid of two sheets with equation

is shifted at first such that one vertex is the origin (s. diagram):

Analogously to the paraboloid case one chooses a sphere containing the origin with center on the z-axis:

After elimination of the linear parts one gets the equation

Only for one gets a pair of planes:

Elliptical cone

elliptical cone Kegel-KSE.svg
elliptical cone

The elliptical cone with equation

is shifted such that the vertex is not the origin (see diagram):

Now a sphere with center at the origin is suitable:

Elimination of yields:

In this case completing the square gives:

In order to get the equation of a pair of planes, the right part of the equation has to be zero, which is true for The solution for z gives:

Related Research Articles

In mathematics, analytic geometry, also known as coordinate geometry or Cartesian geometry, is the study of geometry using a coordinate system. This contrasts with synthetic geometry.

<span class="mw-page-title-main">Ellipse</span> Plane curve: conic section

In mathematics, an ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of the two distances to the focal points is a constant. It generalizes a circle, which is the special type of ellipse in which the two focal points are the same. The elongation of an ellipse is measured by its eccentricity , a number ranging from to .

<span class="mw-page-title-main">Sphere</span> Set of points equidistant from a center

A sphere is a geometrical object that is a three-dimensional analogue to a two-dimensional circle. Formally, a sphere is the set of points that are all at the same distance r from a given point in three-dimensional space. That given point is the center of the sphere, and r is the sphere's radius. The earliest known mentions of spheres appear in the work of the ancient Greek mathematicians.

<span class="mw-page-title-main">Euclidean planes in three-dimensional space</span> Flat surface

In Euclidean geometry, a plane is a flat two-dimensional surface that extends indefinitely. Euclidean planes often arise as subspaces of three-dimensional space . A prototypical example is one of a room's walls, infinitely extended and assumed infinitesimal thin. While a pair of real numbers suffices to describe points on a plane, the relationship with out-of-plane points requires special consideration for their embedding in the ambient space .

<span class="mw-page-title-main">Stereographic projection</span> Particular mapping that projects a sphere onto a plane

In mathematics, a stereographic projection is a perspective projection of the sphere, through a specific point on the sphere, onto a plane perpendicular to the diameter through the point. It is a smooth, bijective function from the entire sphere except the center of projection to the entire plane. It maps circles on the sphere to circles or lines on the plane, and is conformal, meaning that it preserves angles at which curves meet and thus locally approximately preserves shapes. It is neither isometric nor equiareal.

<span class="mw-page-title-main">Ellipsoid</span> Quadric surface that looks like a deformed sphere

An ellipsoid is a surface that can be obtained from a sphere by deforming it by means of directional scalings, or more generally, of an affine transformation.

In mathematics, a quadric or quadric surface (quadric hypersurface in higher dimensions), is a generalization of conic sections (ellipses, parabolas, and hyperbolas). It is a hypersurface (of dimension D) in a (D + 1)-dimensional space, and it is defined as the zero set of an irreducible polynomial of degree two in D + 1 variables; for example, D = 1 in the case of conic sections. When the defining polynomial is not absolutely irreducible, the zero set is generally not considered a quadric, although it is often called a degenerate quadric or a reducible quadric.

<span class="mw-page-title-main">Hyperboloid</span> Unbounded quadric surface

In geometry, a hyperboloid of revolution, sometimes called a circular hyperboloid, is the surface generated by rotating a hyperbola around one of its principal axes. A hyperboloid is the surface obtained from a hyperboloid of revolution by deforming it by means of directional scalings, or more generally, of an affine transformation.

<span class="mw-page-title-main">Paraboloid</span> Quadric surface with one axis of symmetry and no center of symmetry

In geometry, a paraboloid is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry.

<span class="mw-page-title-main">Quadratic function</span> Polynomial function of degree two

In mathematics, a quadratic polynomial is a polynomial of degree two in one or more variables. A quadratic function is the polynomial function defined by a quadratic polynomial. Before the 20th century, the distinction was unclear between a polynomial and its associated polynomial function; so "quadratic polynomial" and "quadratic function" were almost synonymous. This is still the case in many elementary courses, where both terms are often abbreviated as "quadratic".

<span class="mw-page-title-main">Dupin cyclide</span> Geometric inversion of a torus, cylinder or double cone

In mathematics, a Dupin cyclide or cyclide of Dupin is any geometric inversion of a standard torus, cylinder or double cone. In particular, these latter are themselves examples of Dupin cyclides. They were discovered c. 1802 by Charles Dupin, while he was still a student at the École polytechnique following Gaspard Monge's lectures. The key property of a Dupin cyclide is that it is a channel surface in two different ways. This property means that Dupin cyclides are natural objects in Lie sphere geometry.

<span class="mw-page-title-main">Cone</span> Geometric shape

A cone is a three-dimensional geometric shape that tapers smoothly from a flat base to a point called the apex or vertex.

<span class="mw-page-title-main">Cylinder</span> Three-dimensional solid

A cylinder has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base.

<span class="mw-page-title-main">Superquadrics</span> Family of geometric shapes

In mathematics, the superquadrics or super-quadrics are a family of geometric shapes defined by formulas that resemble those of ellipsoids and other quadrics, except that the squaring operations are replaced by arbitrary powers. They can be seen as the three-dimensional relatives of the superellipses. The term may refer to the solid object or to its surface, depending on the context. The equations below specify the surface; the solid is specified by replacing the equality signs by less-than-or-equal signs.

<span class="mw-page-title-main">Conic section</span> Curve from a cone intersecting a plane

A conic section, conic or a quadratic curve is a curve obtained from a cone's surface intersecting a plane. The three types of conic section are the hyperbola, the parabola, and the ellipse; the circle is a special case of the ellipse, though it was sometimes called as a fourth type. The ancient Greek mathematicians studied conic sections, culminating around 200 BC with Apollonius of Perga's systematic work on their properties.

In the theory of analytic geometry for real three-dimensional space, the curve formed from the intersection between a sphere and a cylinder can be a circle, a point, the empty set, or a special type of curve.

<span class="mw-page-title-main">Intersection (geometry)</span> Shape formed from points common to other shapes

In geometry, an intersection is a point, line, or curve common to two or more objects. The simplest case in Euclidean geometry is the line–line intersection between two distinct lines, which either is one point or does not exist. Other types of geometric intersection include:

<span class="mw-page-title-main">Intersection curve</span> Curve that is common to two geometric objects

In geometry, an intersection curve is a curve that is common to two geometric objects. In the simplest case, the intersection of two non-parallel planes in Euclidean 3-space is a line. In general, an intersection curve consists of the common points of two transversally intersecting surfaces, meaning that at any common point the surface normals are not parallel. This restriction excludes cases where the surfaces are touching or have surface parts in common.

<span class="mw-page-title-main">Confocal conic sections</span> Conic sections with the same foci

In geometry, two conic sections are called confocal if they have the same foci.

<span class="mw-page-title-main">Dupin's theorem</span>

In differential geometry Dupin's theorem, named after the French mathematician Charles Dupin, is the statement:

References

  1. W. H. Westphal: Physikalisches Wörterbuch: Zwei Teile in Einem Band. Springer-Verlag, 1952, ISBN   978-3-662-12707-0, p. 350.
  2. H. Tertsch: Die Festigkeitserscheinungen der Kristalle. Springer-Verlag, Wien, 1949, ISBN   978-3-211-80120-8, p. 87.
  3. G. Masing: Lehrbuch der Allgemeinen Metallkunde. Springer-Verlag, Berlin, 1950, ISBN   978-3-642-52-993-1, p. 355.