Colt-Burgess rifle

Last updated
Colt-Burgess rifle
Burgess RifleSans titre-1.jpg
Colt-Burgess rifle
Type Lever-action rifle
Place of originUnited States
Production history
DesignerAndrew Burgess
Manufacturer Colt's Patent Firearms Manufacturing Company
Produced1883–1885
No. built6,403
Specifications
Mass8+34 lb (4.0 kg) (octagon barrel rifle); 8+12 lb (3.9 kg) (round barrel rifle); 7+14 lb (3.3 kg) (carbine) [1]
Length42+34 in (1,090 mm) [1]
Barrel  length25+12 in (650 mm) (rifle); 20 in (510 mm) (carbine)

Cartridge .44-40 Winchester
Action Lever-action
Feed system15 round (rifle) or 12 round (carbine) tubular magazine

The Colt-Burgess rifle, also known as the 1883 Burgess rifle or simply the Burgess rifle, is a lever-action repeating rifle produced by Colt's Patent Firearms Manufacturing Company between 1883 and 1885. The Burgess rifle was Colt's only entrance into the lever-action rifle market, produced to compete with Winchester Repeating Arms Company's line of popular rifles. [2] [3] The 1883 Burgess rifle was designed and patented by Andrew Burgess, an American firearms designer and photographer, who sold the design to Colt. [4] [5]

Contents

Overview

The Colt-Burgess rifle is similar in design to Winchester's lever-action rifles, such as the Winchester Model 1873. It was produced in two versions chambered for the .44-40 Winchester cartridge: a rifle version with a 25+12 in (650 mm) barrel, and a carbine with a 20 in (510 mm) barrel. [2] The rifle features either a full octagon, half-octagon, or round barrel, with the full octagon barrels being the most numerously produced among rifle variants. [1] A tubular magazine is located under the barrel in similar fashion to other lever-action rifles with a capacity of 15 rounds in the rifle version or 12 rounds in the carbine version. The receiver on the Burgess rifle is smaller than the Winchester 1873's, providing for a lighter firearm. The rifle's action, though similar to the Winchester 1873's, is considered to be a stronger design. [1] [4] The action utilizes a toggle-joint system to lock the breechblock. The extension of the loading lever is the lower part of the toggle-joint; the upper part of the toggle-joint is linked to the breechblock. Located on the receiver is a sliding loading gate from which cartridges are fed into the magazine; the sliding gate design is in contrast to Winchester's tilting gate. Burgess rifles were finished with either a blued or browned barrel, blued receiver, casehardened hammer and lever, and walnut stock. Current reproduction Burgess rifles are also available with casehardened frames. [1] [3]

Colt Burgess toggle-joint Colt-Burgess receiver.jpg
Colt Burgess toggle-joint

Production

Although Colt predominantly was a manufacturer of popular revolvers, such as the Colt Single Action Army, the company began in the 1880s to seek to compete against Winchester in the rifle market. [5] In 1882, Colt contacted Andrew Burgess to design a lever-action rifle. Factory records list two entries for serial number 1: a rifle shipped to Hartley & Graham in New York on May 4, 1883, and a saddle ring carbine shipped two weeks later. [6] A total of 6,403 Colt Burgess rifles and carbines were manufactured before production ended in 1885. Approximately 60% of these were of the rifle variation. [1] When compared to production figures of Winchester's 1873 rifle, the Colt-Burgess failed as a serious competitor to Winchester. From 1873 to 1919, Winchester manufactured 720,610 Model 1873 rifles, or an average of over 15,000 per year. [7]

The short production history of the Colt-Burgess has led to much speculation as to the reason of its demise. According to legend, upon hearing of Colt's entrance into the lever-action rifle market, Winchester began to develop a prototype revolver to compete with Colt's market. A "gentleman's agreement" then followed between Colt and Winchester, with Colt agreeing to drop production of the Burgess and Winchester abandoning its plans to develop a revolver. The truth of this story has never been fully verified, and as such, the reason for the Burgess rifle's short production history is unknown. Colt notably introduced the Lightning Magazine Rifle in 1884 and may have been focusing their attention on their new product. [1] [4] [5]

Replicas of the Burgess rifle and carbine are currently produced by the Italian manufacturer Uberti chambered for the .45 Colt cartridge. [4] [8]

See also

Related Research Articles

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), often called the .45 Long Colt, is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892. Although there has never been a ".45 Short Colt" cartridge, the .45 Colt is frequently called the ".45 Long Colt" to better distinguish it from the shorter .45 Schofield cartridge, which was also in use around the time the .45 Colt was introduced.

<span class="mw-page-title-main">Breechblock</span> Part of the firearm action

A breechblock is the part of the firearm action that closes the breech of a breech loading weapon before or at the moment of firing. It seals the breech and contains the pressure generated by the ignited propellant. Retracting the breechblock allows the chamber to be loaded with a cartridge.

A. Uberti, Srl., is an Italian manufacturer of high quality replicas of 19th century American percussion revolvers, carbines, and rifles as well as cartridge revolvers, single-shot rifles, and lever-action rifles. These replicas are commonly used by historical re-enactors, participants in action shooting sports such as cowboy action shooting, working ranchers and target shooters who prefer traditional-style firearms. Thanks to their quality, Uberti replicas are also sought after by collectors and historical firearm enthusiasts.

The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.

Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">Harrington & Richardson</span> Firearms brand

Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

The Marlin Model 336 is a lever-action rifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and barrel lengths, but is commonly chambered in .30-30 Winchester or .35 Remington, using a 20- or 24-inch barrel. Currently, several models with a 16-, 19- and 20-inch barrels are available in .30-30 Winchester. The Model 336 is now back in production as of March 27, 2023.

The Winchester Model 1894 rifle is a lever-action repeating rifle that became one of the most famous and popular hunting rifles of all time. It was designed by John Browning in 1894 and originally chambered to fire two metallic black powder cartridges, the .32-40 Winchester and .38-55 Winchester. It was the first rifle to chamber the smokeless powder round, the .30 WCF in 1895. In 1901, Winchester created the new .32 Winchester Special caliber with production of rifles starting in 1902.

<span class="mw-page-title-main">Winchester Model 1892</span> Lever-action centerfire rifle

The Winchester Model 1892 was a lever-action repeating rifle designed by John Browning as a smaller, lighter version of his large-frame Model 1886, and which replaced the Model 1873 as the company's lever-action for pistol-caliber rounds such as the .44-40.

<span class="mw-page-title-main">Marlin Model 1894</span> Lever-action rifle

The Marlin Model 1894 is a lever-action repeating rifle introduced in 1894 by the Marlin Firearms Company of North Haven, Connecticut. At its introduction the rifle came with a 24-inch barrel and was chambered for a variety of rounds such as .25-20 Winchester, .32-20 Winchester, .38-40, and .44-40. Variants in other chamberings remain in production today.

<span class="mw-page-title-main">Colt Lightning rifle</span> Slide action light rifle

The Colt Lightning Carbine or Colt Lightning Rifle was a slide-action (pump-action) rifle manufactured by Colt from 1884 until 1904 and was originally chambered in .44-40 caliber. Colt eventually made the Lightning Rifle in three different frame sizes, to accommodate a wide range of cartridges, from .22 Short caliber and .38-40 to .50-95 Express. Its profile resembles the pump-action rimfire rifles made by the Winchester Repeating Arms Company and Remington Arms. The Lightning saw use as a sporting arm in America and was adopted for use by the San Francisco Police Department, but was never as popular or as reliable as the various lever-action rifles of its day. It is however reported to have been used by American forces in the Spanish-American War, most likely as privately purchased weapons.

<span class="mw-page-title-main">Evans repeating rifle</span> Lever-action centerfire rifle

The Evans repeating rifle was a lever-action repeating rifle designed by Warren R. Evans as a high capacity repeater.

<span class="mw-page-title-main">Colt Model 1871–72 Open Top</span> Revolver

The Colt Model 1871–72 Open Top is a metallic cartridge rear-loading .44-caliber revolver introduced in 1872 by the Colt's Patent Fire Arms Manufacturing Company. This handgun was developed following two patents, the first one in 1871 and the second one in 1872, it is estimated that the production span lies primarily between February 1872 and June 1873. There is therefore still some confusion when naming it. It is sometimes named Colt Model 1871 or Colt Model 1872 but at this time the most common accepted names are Colt Model 1871–72 Open Top, Colt Model 1871–72 or simply Colt Open Top.

Cimarron Firearms is an American firearms importer that has been in operation since 1984. The company's field of specialty is reproduction firearms from the American Civil War to the end of the Old West period. Founded by Mike Harvey in Houston, Texas, the company is now based in Fredericksburg, Texas.

<span class="mw-page-title-main">Colt ring lever rifles</span> Rifle

The Colt first model ring lever rifle and Colt second model ring lever rifle are two early caplock revolving rifles that were produced by the Patent Arms Manufacturing Company between 1837 and 1841. The first model, produced between 1837 and 1838, was the first firearm manufactured by Samuel Colt, developed shortly before the advent of the Colt Paterson revolver. The first model was succeeded by the second model, produced between 1838 and 1841, which featured minor variations in design and construction. Both models are distinguished from later Colt revolving long-arms by the presence of a small ring lever located in front of the trigger. This lever, when pulled, would index the cylinder to the next position and cock the internal hidden hammer. Although complicated in design and prone to failures, fifty first model rifles were ordered by the U.S. Army for use against Seminole warriors in the Second Seminole War.

References

  1. 1 2 3 4 5 6 7 Waters, Ken (May–June 1982). "Classic Rifles: The Colt-Burgess". Rifle. Wolfe Publishing Co., Inc.: 1213. ISSN   0162-3583.
  2. 1 2 Flayderman, Norm (2007). Flayderman's Guide to Antique American Firearms and Their Values. F+W Media, Inc. p. 122. ISBN   9780896894556.
  3. 1 2 Sapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media, Inc. p. 200. ISBN   9780896895348.
  4. 1 2 3 4 Campbell, Dave (September 2010). "Burgess Rifle: Greatness Shortlived". American Rifleman . National Rifle Association of America . Retrieved April 18, 2014.
  5. 1 2 3 Boorman, Dean K. (2001). The History of Winchester Firearms. Globe Pequot. pp. 52–53. ISBN   9781585743070.
  6. Letter from Beverly Jean Haynes, Office of the Colt Historian, May 3, 2024.
  7. Flayderman, Norm (2007). Flayderman's Guide to Antique American Firearms and Their Values. F+W Media, Inc. p. 307. ISBN   9780896894556.
  8. "1883 Burgess Rifle and Carbine". uberti.com. A. Uberti. 2014. Archived from the original on March 25, 2014. Retrieved April 19, 2014.