Colt King Cobra | |
---|---|
Type | Revolver |
Place of origin | United States |
Production history | |
Manufacturer | Colt's Manufacturing Co. |
Produced | 1986 –1992 1994 –1998 2019 – present |
Specifications | |
Barrel length | 2 inch (50.8 mm) 2.5 inch (63.5 mm) 3 inch (76.2 mm) 4 inch (102 mm) 4.25 inch (108 mm) 6 inch (153 mm) 8 inch (203 mm) |
Cartridge | |
Action | Double-action |
Feed system | Six round cylinder |
Sights | Iron, adjustable rear |
First introduced in 1986, the Colt King Cobra is a medium frame double-action revolver featuring a six round cylinder which was designed and produced by the Colt's Manufacturing Company and marketed to law enforcement agencies and civilian firearms enthusiasts. Available in blued and stainless steel finishes in a variety of barrel lengths and chambered for centerfire .357 Magnum ammunition. [1]
Despite its outward similarity to the Colt Python, [2] the King Cobra design is based upon that of an earlier Colt model, the venerable Trooper MK V, improved with the addition of a heavier-duty barrel, full barrel length cylinder ejection rod protection shroud, and a thicker solid rib on top of the barrel. The King Cobra was introduced in 1986, discontinued in 1992, and returned to Colt's product line in 1994. Dropped a second time in 1998, it was not reintroduced until 2019 as a .357 Magnum, three inch barrel variant of the 2017 Colt Cobra. [3] [4]
Built on Colt's medium-size ‘V’ frame from 1986 to 1992, the King Cobra was offered in very hi-grade carbon steel with Colt's signature bright and highly-polished deep royal blued finish. From 1987 to 1992 and 1994-1998 matte stainless steel was offered, and from 1988 to 1992 the option of polished stainless steel became available as well. King Cobras are equipped with either oversized Walnut target-style or hard rubber black finger-grooved combat-style grips, and an enlarged target hammer. [1] The Cobra's sighting system consists of a fixed iron red insert front sight and a fully adjustable iron white outline rear. [1] Various barrel lengths were offered over time according to the finish option chosen. [1]
In blued steel models, 4- and 6-inch barrels were available from 1986 until the blued guns were dropped from production in 1992, also a 2.5-inch length was offered with the blued finish from 1990 to 1992. In matte stainless, a 2.5-inch length was cataloged from 1987 to 1992, 2-inch barrels were offered from 1988 until King Cobra production ceased in 1992 and then again from 1994 to 1998. Barrel lengths of 4, 6, and 8 inches also were available on models with the matte stainless finish from 1990 to 1992; they returned to the product lineup from 1994 to 1998. In the mirror bright stainless finish, 4- and 6-inch lengths were offered from 1988 to 1992, a 2.5-inch was available from 1990 to 1992, and an 8-inch length was offered from 1989 to 1992. The King Cobra is chambered for the powerful .357 Magnum cartridge, but like all .357 revolvers will also fire .38 Special ammunition. [1]
In 1998 the top strap was drilled and tapped for the mounting of scope rings. [3]
Colt also produced a total of six King Cobras with three-inch barrels and fixed sights. These were made for the Montreal Police Department, which had expressed an interest in such a model for plain-clothes officers. The revolver was never adopted and the six samples were returned to the distributor. One surfaced in North Carolina in 2006, was lettered by Colt Archives, listed on Gunbroker.com, and is now in the hands of a private collector. The fate of the other five is unknown.[ citation needed ]
In 2019, the King Cobra was reintroduced with a three-inch barrel. The gun debuted at SHOT Show 2019.
Like all .357 Magnum revolvers, the Colt King Cobra can chamber and fire the shorter .38 Special cartridge. [3]
In 2022, The King Cobra line added a 22LR version, 10 shot revolver with either a 4.25 or 6.0 inch barrel.
The Colt Python is a double action/single action revolver chambered for the .357 Magnum cartridge. It was first introduced in 1955 by the Colt's Manufacturing Company.
The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market.
The Colt Cobra is a lightweight, aluminum-framed, double-action short-barrelled revolver, not to be confused with the Colt King Cobra. The Cobra was chambered in .38 Special, .38 Colt New Police, .32 Colt New Police, and .22 Long Rifle. It holds six shots of ammunition and was sold by Colt from 1950 until 1981. In December 2016, it was announced that Colt would be producing new run Colt Cobras with a steel frame and a fiber optic front sight. This model was released in early 2017.
The Raging Bull is a DA/SA, large-frame revolver manufactured by the Brazilian Taurus International firearm company beginning in 1997. The Raging Bull has a dual-locking design built on a heavy frame, allowing the revolver to easily fire extremely powerful loads. Because of the powerful nature of these handguns, the Raging Bull has a ported barrel and a cushioned rubber grip to mitigate harsh recoil. As of 2024, it is the most powerful revolver line ever offered by Taurus.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.
The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 31⁄2", 4", 5", 6", 61⁄2", 83⁄8", 83⁄4", or 105⁄8" barrel lengths.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.
The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.
The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.
The Colt Trooper is a medium frame, double-action revolver featuring a six-round cylinder, chambered for .22 Long Rifle, .22 Winchester Magnum Rimfire, .38 Special, and .357 Magnum caliber cartridges. Designed as a less expensive alternative to the upscale Colt .357 and the later Colt Python and Colt King Cobra, it was marketed to law enforcement agencies as well as civilians.
The Beretta Stampede is a single-action revolver manufactured by Beretta that is a close clone of the Colt Single Action Army "Peacemaker". The main difference is that the Beretta utilizes a transfer bar like the Ruger Vaquero which makes the gun safe to carry a full 6 rounds.
Llama Firearms, officially known as Llama-Gabilondo y Cia SA, was a Spanish arms company founded in 1904 under the name Gabilondo and Urresti. Its headquarters were in Eibar in the Basque Country, Spain, but they also had workshops during different times in Elgoibar and Vitoria. The company manufactured moderate-priced revolvers and self-chambering pistols in a wide variety of models. These were popular mainly in the European and Latin American export market, as well as domestically in Spain.
The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish, all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance.
The Smith & Wesson Model 57 is an 'N' frame (large), double-action revolver with a six round cylinder, chambered for the .41 Magnum cartridge, and designed and manufactured by the Smith & Wesson firearms company. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.
The MIL, Inc. Thunder 5 is a double-action revolver chambered to fire both the .410-bore shotshell cartridge and the .45 Colt revolver cartridge.