Colt Anaconda

Last updated
Colt Anaconda
Colt Anacondas in 3 barrel lengths.jpg
Original line of .44 Magnum Colt Anaconda in three barrel lengths
Type Revolver
Place of originUnited States
Production history
ManufacturerColt's Manufacturing Company
Produced1990–2003
2021–present
Variants Kodiak
Anaconda Hunter
Anaconda Custom Ported
Anaconda Camo [1]
Specifications
Mass
  • 47 oz, 1.3kg (4-inch barrel)
  • 53 oz, 1.5kg (6-inch barrel)
  • 59 oz, 1.7kg (8-inch barrel)
Length
  • 9+58 in, 240 mm (4-inch barrel)
  • 11+58 in, 300 mm (6-inch barrel)
  • 13+58 in, 350 mm (8-inch barrel)
Barrel  length
  • 4-inch barrel (102 mm)
  • 6-inch barrel (153 mm)
  • 8-inch barrel (203 mm)

Cartridge
Action Double-action
Feed systemSix round cylinder
SightsAdjustable open iron sights
Anaconda rollmark Anaconda-bbl.jpg
Anaconda rollmark

The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market. [2]

Contents

Development

Built on a new and heavier ‘MM' frame, the Anaconda was brought out to compete with .44 Magnum contemporaries such as the Smith & Wesson Model 29, the Sturm, Ruger & Co. Redhawk and Blackhawk, and the Dan Wesson Firearms Model 44. Considering that many of these models had been marketed and sold for fully 35 years upon its introduction, the Anaconda was a very late entry into the large-bore handgun market. [3] Unlike most other pistols introduced in the 1980s and 1990s, the Anaconda was never offered with a carbon steel blued finish, but was available only in stainless steel. [2] When originally introduced, Anacondas were plagued with poor accuracy, but changes to the barrels quickly corrected the problems to the point that Colt billed its new pistol as among the most accurate .44 Magnum revolvers in production. [3] [4] Anaconda revolvers were primarily marketed for sport enthusiast shooters and hunters, as they are too large for law enforcement general duty use or concealed-carry, although made-to-order limited production versions of the gun continued to be available from the Colt custom gun shop until approximately 2003. [2] In 2021, Colt resumed production of the Anaconda, using a new design with a stronger frame and an oversized Python action. [5]

Features

Originally chambered for the .44 Magnum cartridge, in 1993 the Anaconda began to be offered in .45 Colt as well. Its fit and finish resembled an upsized King Cobra married to a ventilated-rib barrel reminiscent of the Python's. [3] Initially marketed with a satin brushed stainless finish, a highly polished mirror-like option known as "Ultimate Stainless" was catalogued for a time through the Colt Custom Shop. Anacondas came equipped with four, six, or eight inch barrels, neoprene synthetic rubber finger-grooved combat-style grips with nickel colored 'Rampant Colt' medallions, large target type hammers and triggers, as well as open iron sights with a red insert front and fully adjustable white outline rear. [3] [4] Some models were factory drilled and tapped for telescopic sight mounting, while others shipped with recoil reducing Magna-Ported barrels. [4] The trigger actions on these guns are rated as very high-quality, and the heavy-duty solid construction and weight tends to absorb recoil, making the Anaconda relatively easy to shoot with heavy loads. [3] [4]

Kodiak

Introduced in 1993, the Kodiak was similar to the Anaconda in that it was constructed entirely of stainless steel, but offered the additional features of a recoil-reducing factory magna-ported barrel and unfluted cylinder. [6]

There were 2000 Kodiaks made as a special run of Anacondas, breaking away from their long history of naming revolvers after snakes. [6] A special run of 1000 King Cobras was made about the same time, having the same Magna-Ported barrel and unfluted cylinder and were called the Grizzly. [6] There was an uncatalogued 5-inch (130 mm) barrel version of the Anaconda, with reportedly less than 150 made. These 5-inch (130 mm) versions command very high prices when they are encountered.[ citation needed ] Additionally, Colt made an extremely low number of 4-inch (100 mm) barrel Anacondas chambered in .45 Colt. This ultra-rare variation commands a premium price when encountered as well.

In 2024, Colt reintroduced the Kodiak, a variant of the newer Anaconda (reintroduced in 2021), with the same style of Magna-ported barrel and unfluted cylinder of the originals, available with a 4.25-inch barrel.

See also

Related Research Articles

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

<span class="mw-page-title-main">Colt Python</span> Revolver

The Colt Python is a double action/single action revolver chambered for the .357 Magnum cartridge. It was first introduced in 1955 by the Colt's Manufacturing Company.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

<span class="mw-page-title-main">Taurus Raging Bull</span> Revolver

The Raging Bull is a DA/SA, large-frame revolver manufactured by the Brazilian Taurus International firearm company beginning in 1997. The Raging Bull has a dual-locking design built on a heavy frame, allowing the revolver to easily fire extremely powerful loads. Because of the powerful nature of these handguns, the Raging Bull has a ported barrel and a cushioned rubber grip to mitigate harsh recoil. As of 2024, it is the most powerful revolver line ever offered by Taurus.

<span class="mw-page-title-main">Smith & Wesson Model 586</span> Revolver

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

<span class="mw-page-title-main">Smith & Wesson Model 686</span> Revolver

The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

<span class="mw-page-title-main">Smith & Wesson Model 27</span> Revolver

The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 312", 4", 5", 6", 612", 838", 834", or 1058" barrel lengths.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Ruger GP100</span> Revolver

The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.

<span class="mw-page-title-main">Ruger Super Redhawk</span> Revolver

The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Smith & Wesson Centennial</span> Revolver

S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long barreled gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Colt Trooper</span> Revolver

The Colt Trooper is a medium frame, double-action revolver featuring a six-round cylinder, chambered for .22 Long Rifle, .22 Winchester Magnum Rimfire, .38 Special, and .357 Magnum caliber cartridges. Designed as a less expensive alternative to the upscale Colt .357 and the later Colt Python and Colt King Cobra, it was marketed to law enforcement agencies as well as civilians.

<span class="mw-page-title-main">Dan Wesson Firearms</span> American handgun manufacturer

Dan Wesson Firearms (DW), part of CZ-USA, is an American handgun manufacturer. The corporate headquarters, customer service and manufacturing plant is located in Norwich, New York. Dan Wesson Firearms is known for its revolver expertise and for some types of ammunition it has introduced over the years.

<span class="mw-page-title-main">Ruger Vaquero</span> Six-shot single-action revolver

The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish, all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance.

<span class="mw-page-title-main">Smith & Wesson Model 57</span> Revolver

The Smith & Wesson Model 57 is an 'N' frame (large), double-action revolver with a six round cylinder, chambered for the .41 Magnum cartridge, and designed and manufactured by the Smith & Wesson firearms company. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.

The .500 S&W Magnum or 12.7×41mmSR is a .50 caliber semi-rimmed revolver cartridge developed by Cor-Bon in partnership with the Smith & Wesson "X-Gun" engineering team for use in the Smith & Wesson Model 500 X-frame revolver and introduced in February 2003 at the SHOT Show. From its inception, it was intended to be the most powerful handgun cartridge to date, with the capacity to harvest all North American game species. While more powerful handgun cartridges, such as the .500 Bushwhacker, have emerged since, they are only available in custom firearms, and the .500 S&W remains the most powerful production handgun cartridge.

References

  1. Scepaniak, Adam. "Wheelgun Wednesday: The Colt Anaconda 44 Magnum has Returned!". The Firearm Blog.
  2. 1 2 3 “Colt mk. V revolvers: Trooper, KingCobra, Anaconda (USA)” World Guns Web site. Accessed November 26, 2008.
  3. 1 2 3 4 5 Taffin, John. "Colt's Biggest Snake, the Anaconda". Sixguns.com. Retrieved November 26, 2008.
  4. 1 2 3 4 "Anaconda". Colts Mfg. Archived from the original on January 13, 2007. Retrieved November 26, 2008.
  5. Moss, Matthew (2021-03-22). "Colt To Bring Back the Anaconda". The Firearm Blog. Archived from the original on 2021-04-10. Retrieved 2021-03-23.
  6. 1 2 3 Sapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media, Inc. p. 125. ISBN   978-0-89689-534-8.