The brightly coloured Contempra was a departure from earlier Northern Electric designs, which tended to be black or beige.
The Contempra is a telephone designed and produced by Northern Electric beginning in 1967. Contempra was the first phone designed in Canada,[1] previous Canadian sets having been designed in the US for Western Electric and built under licence.
Contempra was highly stylized, using straight lines and oblique angles where curves and corners would be found on contemporary sets like the Trimline. The design was further notable at release for being available in "nine outrageously elegant colours"[2] including bright red and orange, deep brown and green, and other colours selected to match new styles of interior decorating emerging in the 1960s. The one option that was not initially supplied was black, the standard colour for phones for decades.
Contempra remains an icon of Canadian industrial design, famous to the point of being featured on a postage stamp. It won numerous design awards and is part of the permanent display at the Canadian Museum of History and Canada Science and Technology Museum. It was widely licensed around the world and its production, including that of a smaller version known as Contemprette, continued into the 1990s.
History
Like Bell Telephone in the United States, Bell Canada held a monopoly on telephone service in Canada which encompassed every aspect of the network from the wiring to the telephone handsets. Bell Canada had its own manufacturing arm, Northern Electric (NE), which over time became partially owned by its US counterpart, Western Electric (WE). As a purely manufacturing organization, Northern Electric had no internal design department and the telephones produced in Canada were US models.[3] This also allowed the Canadian factories to sell into the US as seasonal demand waxed and waned.[4]
In 1949, an antitrust suit in the US forced Western Electric to sell its stake in Northern Electric; the sale was completed in 1956. The two companies arranged a ten-year licensing deal allowing NE to continue producing WE designs during that time.[4] In 1965, as the end of the licensing deal approached, R C Scrivener, director of Bell Canada, began developing Northern Electric to become truly independent. He later said of the design process: "We could have adopted, as we have in the past, an American design. They have excellent models with many of the same features. But we thought we should produce our own."[5]
At that time, Henry Dreyfuss Associates was working on a new design for Western Electric. Dreyfuss had designed all of Bell's phones since the 1940s, including the ubiquitous business-oriented Model 500 and the more modern home-oriented Princess. Their newly introduced Trimline design had several unique features, including having the rotary dial in the handset instead of the base, and compressing the size of the dial through the use of a moving finger-stop.[7]
Tyson took Dreyfuss' advice on how to design a good product; Dreyfuss believed that if one wanted to design a successful gas pump, you should go out and pump gas. Tyson fulfilled this need by spending several weeks with telephone installers in Guelph, Ontario. This work revealed two important behaviours that led to a design significantly different from the Trimline. The first was that he found customers often had two phones, a desktop model for a side table in the bedroom and a wall model for the kitchen. Tyson concluded that any new design should be able to be used on either mounting.[6] He also noticed that users would often try to hold the handset between their shoulder and chin, something that could not be easily done with the Trimline due to its rounded back and slippery plastic shell.[5]
Tyson produced a new design roughly the size of the Trimline but in an angular enclosure with large flat areas on the handset that allowed it to be easily held on the shoulder. Tyson removed the Trimline's light-up dial, which, at that time required a bulky transformer plugged into a wall socket to power the lamp. He also widened the base to make it more stable and less likely to be pulled off a desk by the handset cord, and then moved the handset to the left side of the case to provide room on the right for future innovations such as a videophone screen. The resulting design was similar to the Trimline in overall layout, but somewhat larger and dramatically more striking and modern looking.[5]
Tyson also took the advice of his teachers at OCAD and designed two phones, his own new design and another that exactly met the original requirements management had set down, which produced "an amorphous blob". About 18 months after joining Northern Electric he presented both models; his design immediately caught their eye and the original requirements were forgotten. The adoption of Tyson's design was followed by a naming contest, which initially lead toward either "Expo", due to the upcoming Expo 67, or "Tinkerbell", a play on the name of Dreyfuss' Princess model. Tyson eventually convinced everyone that Contempra was the right name.[6]
Production began in late 1967.[lower-alpha 1] Tyson was sent on a publicity tour, demonstrating the phone on morning talk shows.[6] Around the same time, the Carterfone opened the Bell network to direct connections by 3rd party suppliers, and Northern Electric began production of Contempra at a plant in Nashville, selling it through a network of resellers.[8] In spite of its larger size, Contempra was dramatically more modern looking than the Trimline, which has been described as "a turtle finding refuge on a log",[9] and was soon a staple of television shows and movies attempting to define the modern look.[5]
The Contempra was an international licensing success, with fifteen licensees selling the design around the world.[4] Notable among these was the 1977 licence to UK-based General Electric Company who built sets locally and sold them into the Post Office Telecommunications "Special Range Telephone" line, upscale designs that could be rented for an additional fee.[10] A similar deal followed with Thomson-CSF in France.[11]
In 1976, Northern Electric was rebranded as part of an ever-growing Northern Telecom. The next year they reorganized their product lines and Contempra became part of their new "Imagination" line of phones,[6] similar to the UK Special Range. Ultimately, the empty area on the right of the phone was of little use and led to the introduction of the Contemprette model in 1982, which featured a smaller base that made it more comparable to the Trimline in size while still retaining the strong angular design of the original Contempra. It was sold primarily into the US market.[12] In 1986, a lighter and slightly more rounded-off version of the Contemprette was introduced in Canada as the Silhouette.[13]
Design
The handset used a miniaturized dial, possible through the use of the moving finger-stop. The flash button is visible just below the dial.
The outer casing of the Contempra was made of injection-moulded terpolymer and other modern plastics.[5] The result was, by modern standards, very sturdy and relatively light for the era at 1.1 kilograms (2.4lb).[10][lower-alpha 2]
The handset was essentially L-shaped, although the bend between top and bottom was about 40 degrees rather than 90.[14] From above, it was roughly rectangular, tapering slightly towards the top and bottom. The speaker was in a raised section so that, when the handset was cradled on the shoulder, the speaker and dial were free of the cheek. The base was rectangular as seen from the top, and a triangle as seen from the side, matching the angle of the handset.[15]
The upper and lower sides of the earpiece extension were angled relative to the base, and there was similar angling in the recess in the base where the earpiece sat when the phone was on-hook. The lower angle engaged a matching projection in the base that held the phone up when wall mounted. The angle at the top resulted in the handset naturally engaging the projection when it was placed back on the base.[16] In addition to these features, the design of the base included a recess in the center that would accept the angle of the earpiece so that the handset could be hung from that area without engaging the hookswitch and ending the call.
The hookswitch, made of clear polycarbonite, was located in the base at the lower lip. A separate "recall" button, more commonly known as a "flash" button, was placed on the handset so that a new call could be placed without having to return the handset to the base to hang up.[17] The handset was connected to the base using a coiled cord that was permanently connected at both ends in the Canadian versions,[lower-alpha 3] and required disassembly of the phone to replace.[18] The cord connected to the base on the right, so the cord fell in a U shape when hanging from the wall.[19] A wheel, almost hidden under the base on the right, controlled the volume of the ringer.[20]
The original model used the same moving-finger-stop dial design of the Trimline. In order for a digit to register when dialled, the dial must rotate a minimum angular distance so that the return motion generates the "flashes" that produce the number. On earlier designs like the Model 500, this was implemented by leaving a gap between the digit 1 and the finger-stop, about 45 degrees. In the moving-finger-stop design there was no gap between the 1 and the finger-stop, instead, the finger-stop itself was able to rotate that same amount to produce the required motion. Removing the gap allowed the entire dial to be reduced in diameter while still using the same size finger holes.[17]
Although Touch-Tone service was introduced in Canada in 1964[21] it was not until 1971 that a Touch-Tone version of the Contempra was released.[22] The Touch-Tone models replaced the in-handset dial with a separate pushbutton unit, but the system as a whole was otherwise unchanged.[16]
Accolades
The Contempra was a darling of the design world when it was introduced, being featured in journals in the industrial design and telephony markets. It was awarded a citation by the Canada Design Council and went on to be part of the permanent collections of the Design Exchange[5] and the Canadian Museum of History.[3] In 1974 it was featured on a postage stamp commemorating 100 years of telephone development in the country.[23][6]
Explanatory notes
↑ Sources vary greatly on the date, from 1967 through 1969. The 1968 date generally appears in US sources and may refer to its introduction in that country, but further research is warranted.
↑ For comparison, the Model 500 was about double the weight of the Contempra, at just over 5 pounds (2.3kg).
↑ RJ9/10 was not yet popular for handsets in Canada.
Related Research Articles
A rotary dial is a component of a telephone or a telephone switchboard that implements a signaling technology in telecommunications known as pulse dialing. It is used when initiating a telephone call to transmit the destination telephone number to a telephone exchange.
In telecommunications, an acoustic coupler is an interface device for coupling electrical signals by acoustical means—usually into and out of a telephone.
The Trimline telephone is a series of telephones that was produced by Western Electric, the manufacturing unit of the Bell System. These telephones were first introduced in 1965 and are formally referred to as the No. 220 Hand Telephone Sets. The Trimline was designed by Henry Dreyfuss Associates under the project direction of Donald Genaro; the firm had produced the previous post-war desktop telephone types for the American Telephone & Telegraph Company.
A telephone call or telephone conversation, also known as a phone call or voice call, is a connection over a telephone network between the called party and the calling party. Telephone calls started in the late 19th century. As technology has improved, a majority of telephone calls are made over a cellular network through mobile phones or over the internet with Voice over IP. Telephone calls are typically used for real-time conversation between two or more parties, especially when the parties cannot meet in person.
The Ericofon is a one-piece plastic telephone created by the Ericsson Company of Sweden and marketed through the second half of the 20th century. It was the first commercially marketed telephone to incorporate the dial and handset into a single unit. Because of its styling and its influence on future telephone design, the Ericofon is considered one of the most significant industrial designs of the 20th century by Phaidon. It is in the collection of the Museum of Modern Art in New York City. In Sweden, the Ericofon is known as the cobra telephone for its resemblance to a coiled snake.
A telephone jack and a telephone plug are electrical connectors for connecting a telephone set or other telecommunications apparatus to the telephone wiring inside a building, establishing a connection to a telephone network. The plug is inserted into its counterpart, the jack, which is commonly affixed to a wall or baseboard. The standards for telephone jacks and plugs vary from country to country, though the 6P2C style modular plug has become by far the most common type.
A cordless telephone or portable telephone has a portable telephone handset that connects by radio to a base station connected to the public telephone network. The operational range is limited, usually to the same building or within some short distance from the base station.
The Improved Mobile Telephone Service (IMTS) was a pre-cellular VHF/UHF radio system which linked to the public telephone network. IMTS was the radiotelephone equivalent of land dial phone service. Introduced in 1964, it replaced Mobile Telephone Service (MTS) and improved on most MTS systems by offering direct-dial rather than connections through a live operator, and full-duplex operation so both parties could talk at the same time.
The Western Electric model 500 telephone series was the standard domestic desk telephone set issued by the Bell System in North America from 1950 through the 1984 Bell System divestiture. Millions of model 500-series phones were produced and were present in most homes in North America. Many are still in use today because of their durability and ample availability. Its modular construction compared to previous types simplified manufacture and repair, and facilitated a large number of variants with added features.
The model 302 telephone is a desk set telephone that was manufactured in the United States by Western Electric from 1937 until 1955, and by Northern Electric in Canada until the late 1950s, until well after the introduction of the 500-type telephone in 1949. The sets were routinely refurbished into the 1960s. It was one of the most widely used American combined telephone sets to include the ringer and network circuitry in the same telephone housing.
Design Line, also known as Deco-Tel, is a brand name that AT&T has used for several of its specialty telephone designs to fulfill the demand by customers for more variety in telephone models.
AT&T Technologies, Inc., was created by AT&T in 1983 in preparation for the breakup of the Bell System, which became effective as of January 1, 1984. It assumed the corporate charter of Western Electric Co., Inc.
The Princess telephone was introduced by the Bell System in 1959. It was a compact telephone designed for convenient use in the bedroom, and contained a light-up dial for use as a night-light. It was commonly advertised with the slogan "It's little...It's lovely...It lights", which was suggested by Robert Karl Lethin, an AT&T employee.
The model 5302 telephone was a look-alike product to the 500-type telephone that was introduced as a stopgap by Western Electric in 1955 to meet the increasing post-World War II demand for a modernized telephone. It reused existing component supplies from the older model 302 that the model 502 replaced. The 302 had been issued since 1937, but starting in 1950, units were replaced with the new 500-series sets, without having served their useful component life.
The Trimphone is a model of telephone designed in the late-1960s in the UK. It was positioned as a more fashionable alternative to the standard telephones available from the Post Office Telephones, the nationalised predecessor to British Telecom. The name is an acronym standing for Tone Ring Illuminator Model, referring to the then innovative electronic ringer and the illuminated dial. The luminous dial or betalight contained the mildly radioactive element tritium, which later caused some concern about safety. In June 1991 the United Kingdom Atomic Energy Authority at Harwell was fined £3,000 by Wantage Magistrates Court for accumulating radioactive waste, having collected several thousand Trimphone luminous dials in a skip.
The General Post Office (GPO) of the United Kingdom carried the sole responsibility for providing telecommunication services across the country with the exception of Hull. The GPO issued a range of telephone instruments to telephone service subscribers that were matched in function and performance to its telephone exchanges.
Headsets connect over a telephone or to a computer, allowing the user to speak and listen while keeping both hands free. They are commonly used in customer service and technical support centers, where employees can converse with customers while typing information into a computer. Also common among computer gamers are headsets, which will let them talk with each other and hear others, as well as use their keyboards and mice to play the game.
The candlestick telephone is a style of telephone that was common from the late 1890s to the 1940s. A candlestick telephone is also often referred to as a desk stand, an upright, or a stick phone. Candlestick telephones featured a mouthpiece (transmitter) mounted at the top of the stand, and a receiver (earphone) that was held by the user to the ear during a call. When the telephone was not in use, the receiver rested in the fork of the switch hook protruding to the side of the stand, thereby disconnecting the audio circuit from the telephone network.
Donald M. Genaro is a retired American industrial designer. He was president of Henry Dreyfuss Associates up to 1994. He has been recognized by The New York Times for his contribution to industrial design.
The Western Electric hand telephone sets comprise a series of telephones that were produced from 1927 by the Western Electric Company for the American Telephone and Telegraph Company (AT&T) and the Bell System. The series features the mouthpiece (transmitter) and the earpiece (receiver) combined into a hand-held unit, originally named a hand telephone, or handset. The handset would be held against the ear and in front of the mouth simultaneously, in contrast to earlier telephones in the Bell System where only the receiver was held against the ear, while the user spoke into a fixed transmitter mounted on a telephone stand or wall telephone.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
