Development | |
---|---|
Designer | W. I. B. Crealock |
Location | United States |
Year | 1978 |
Builder(s) | Cruising Consultants Inc. Pacific Seacraft |
Role | Cruiser |
Name | Crealock 37 |
Boat | |
Boat weight | 16,200 lb (7,348 kg) |
Draft | 5.50 ft (1.68 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 36.92 ft (11.25 m) |
LWL | 27.75 ft (8.46 m) |
Beam | 10.82 ft (3.30 m) |
Engine type | Volvo 32 hp (24 kW) or Yanmar 4JH2E 51 hp (38 kW) diesel engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 6,200 lb (2,812 kg) |
Rudder(s) | skeg-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 44.00 ft (13.41 m) |
J foretriangle base | 15.80 ft (4.82 m) |
P mainsail luff | 38.20 ft (11.64 m) |
E mainsail foot | 14.30 ft (4.36 m) |
Sails | |
Sailplan | Masthead sloop |
Mainsail area | 273.13 sq ft (25.375 m2) |
Jib/genoa area | 347.60 sq ft (32.293 m2) |
Total sail area | 620.73 sq ft (57.668 m2) |
Racing | |
PHRF | 174 (average) |
The Crealock 37, also called the Pacific Seacraft 37, is an American sailboat that was designed by British naval architect W. I. B. Crealock as a cruiser and first built in 1978. [1] [2] [3] [4]
In 2002, the boat was admitted to the American Sailboat Hall of Fame. [5]
The design was initially commissioned and intended to be built by Clipper Marine in the United States, as the Clipper Marine 37, but the company went out of business before production commenced. [1]
In 1978 the design was produced by Cruising Consultants Inc. of Newport Beach, California, under the name Crealock 37. [1]
In 1980 the design was acquired and put into production by Pacific Seacraft of Washington, North Carolina as the Pacific Seacraft 37 and it remained in production in 2020. [1] [6] [7]
The Crealock 37 is a recreational keelboat, built predominantly of fiberglass, with a plywood core, with wood trim. It has a masthead sloop rig, with an optional cutter rig or yawl rig, with a mizzen mast. It features a raked stem, a raised canoe transom, a skeg-mounted rudder controlled by a wheel and a fixed fin keel. It displaces 16,200 lb (7,348 kg) and carries 6,200 lb (2,812 kg) of lead ballast. [1] [4] [8]
The boat has a draft of 5.50 ft (1.68 m) with the standard keel and 4.92 ft (1.50 m) with the optional shoal draft keel. [1] [7]
The boat is fitted with a Volvo 32 hp (24 kW) or, on later models, a Yanmar 4JH2E 51 hp (38 kW) diesel engine for docking and maneuvering. The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 95 U.S. gallons (360 L; 79 imp gal). [1]
The design has sleeping accommodation for up to seven people. There is an angled "V" berth in the bow, a double and single settee berth in the main salon and a double berth in the stern, along with a quarter berth. The galley is located at the foot of the companionway steps, on the starboard side. It includes a double sink, a three-burner stove and oven and a top-loading refrigerator. The head is located forward, just aft of the bow cabin, on the starboard side and includes a shower. A navigation station is provided aft, on the port side. The design has below deck headroom of 75 in (191 cm). Ventilation is provided by two cabin hatches. [4] [8]
The jib is sheeted to short jib tracks. The mainsheet traveler is mounted on the coach house roof, as are three winches. There are also two primary jib winches mounted on the cockpit coamings. [4]
The design was named to the American Sailboat Hall of Fame in 2002. The citation says, in part, "The Pacific Seacraft 37 is a classic American sailboat with an honesty of design that, combined with the highest standards of boatbuilding as attested to by ABS certification for hull and deck construction and CE certification for unlimited offshore use, has shown the sailing industry that there is a place in the hearts and budgets of sailors for a boat created expressly to go to sea and bring the crew back safely." [5]
In a 1994 review Richard Sherwood wrote that the "underwater lines show a very normal fin keel, but the canoe stern is unusual. The cutter rig shown does not indicate stay sails, Maximum beam is aft."
John Kretschmer wrote in a 2008 review for Sailing Magazine, "downwind, the cutter is not particularly efficient, and some type of drifter or cruising spinnaker is necessary to maintain speed in light air. When the wind pipes ups, the 37 finds its stride, even when a large sea is running. Several owners have reported touching double digits while surfing down trade wind seas. Long passages that average better than 150 miles per day are common. However, the most underrated performance factor is seakindliness, as nothing wears out the crew or the gear faster than a quick, pounding motion. The Pacific Seacraft 37 is a "swisher" not a "pounder."". [8]
In a 2011 review in Cruising World, Jeremy McGeary wrote, "it was built as a cutter and as a yawl. I fear the yawl might be a bit busy around the cockpit. I like the cutter rig for its versatility upwind and reaching. I’d dispense with a big genoa and use a modern asymmetric for extra downwind sail area." [9]
Similar sailboats
The Flicka 20 is an American trailerable sailboat designed by Bruce Bingham as a cruiser and first built in 1974.
The Dana 24 is an American trailerable sailboat that was designed by William Crealock as an ocean cruiser and first built in 1974.
The Orion 27-2, also called the Orion 27 Mk II, is an American sailboat that was designed by Henry Mohrschladt as a cruiser and first built in 1981.
The Freedom 35 is an American sailboat that was designed by David Pedrick as a racer/cruiser and first built in 1993.
The Pilot 35 is an American sailboat that was designed by Sparkman & Stephens as a racer-cruiser and first built in 1962.
The Vancouver 36 is an American sailboat that was designed by Robert B. Harris as a bluewater ocean cruiser and first built in 1977.
The Hinterhoeller F3 is a Canadian sailboat that was designed by Argentine naval architect Germán Frers as a racer-cruiser and first built in 1981.
The Seidelmann 37 is an American sailboat that was designed by Bob Seidelmann as a racer-cruiser and first built in 1980.
The Dickerson 37 is an American sailboat that was designed by George Hazen as a cruiser and first built in 1980.
The Endeavour 37 is an American sailboat that was designed by Dennis Robbins as racer-cruiser and first built in 1977.
The Cal 39 Mark II and Cal 39 Mark III are a series of American sailboats that were designed by C. William Lapworth as racer-cruisers to fit the International Offshore Rule and first built in 1978.
The Bristol 40 is an American sailboat that was designed by Ted Hood as a racer-cruiser and first built in 1970.
The Tayana 37 is a Taiwanese sailboat that was designed by American Robert Perry as a cruiser and first built in 1976.
The Blue Water 24 is an American trailerable sailboat that was designed by Thomas C. Gillmer as a blue water cruiser and first built in 1961.
The South Coast 21 is an American trailerable sailboat that was designed by Carl Alberg as a daysailer and first built in 1965.
The South Coast 22 is an American trailerable sailboat that was designed by Carl Alberg, James Monroe and Hollis Metcalf as a pocket cruiser and first built in 1968.
The Pacific Seacraft 25 is an American trailerable sailboat that was designed by Henry Mohrschladt as a cruiser and first built in 1976.
The Orion 27 is an American sailboat that was designed by Henry Mohrschladt as a cruiser and first built in 1979.
The Seafarer 31 Mark I is an American sailboat that was designed by William H. Tripp Jr., with design development by McCurdy & Rhodes, as a racer-cruiser and first built in 1968.
The Harbor 25 is an American trailerable sailboat that was designed by W. D. Schock Corp's Steve Schock as a day sailer-cruiser and first built in 2007.