The DSD Bridge across the Cheyenne River in Wyoming is a single-span truss bridge built circa 1915. The steel seven-panel Pennsylvania truss spans 130.67 feet (39.83 m) on Niobrara County Road CN14-46. It was placed on the National Register of Historic Places as part of a thematic study of Wyoming river crossings in 1985.
The CQA Four Mile Bridge spans the Big Horn River in Hot Springs County, Wyoming. The bridge was erected in 1927-28 by the Charles M. Smith Company and spans 175 feet (53 m) with a total length of 295 feet (90 m). The rigid 7-panel Pennsylvania through-truss was nominated for inclusion on the National Register of Historic Places as one of forty bridges throughout Wyoming that collectively illustrate steel truss construction, a technique of bridge design that has become obsolete since the mid-twentieth century. The bridge rests on concrete piers and abutments and is approached by two Warren pony trusses.
The ECS Bridge over Big Goose Creek was a bridge near Sheridan, Wyoming, that was built in 1914. It was a Pratt pony truss bridge built by the Canton Bridge Company of Canton, Ohio. The Canton Bridge Company built four steel bridges in Wyoming in 1914; when nominated to the National Register of Historic Places in 1982, the ECS Bridge was the only one of these surviving in its original location. It was 50 feet (15 m) long and 15 feet (4.6 m) wide.
The EAU Arvada Bridge was a Parker through truss bridge located near Arvada, Wyoming, which carried Sheridan County Road CN3-38 across the Powder River. The bridge was built in 1917 by the Monarch Engineering Company of Denver. The single-span 8-panel bridge was 162 feet (49 m) long and was connected by steel pins. When nominated to the National Register of Historic Places in 1982, it was one of only two Parker through truss bridges remaining in Wyoming.
The CKW Bridge over Powder River is a Pratt deck truss bridge near Arvada, Wyoming, which carries US 14/US 16 across the Powder River. The bridge was built from 1932 to 1933 by the W. P. Roscoe Company. The 452-foot (138 m) bridge has three continuous main spans and two shallow approach spans. It is the only continuous truss bridge still in use on a Wyoming road and one of only two deck truss bridges built on a major highway.
The EBF Bridge over Powder River is a bridge located near Leiter, Wyoming, which carries Sheridan County Road CN3-269 over the Powder River. The 201.5-foot-long (61.4 m) bridge has two spans: the first span is a Pratt through truss, while the second span is a Warren truss. Due to this configuration, the bridge has been called "one of [Wyoming's] more interesting vehicular trusses." The trusses in the bridge are connected rigidly rather than by pins; the bridge was built in a transitional period between the two designs and is an early example of rigid connections. The Gregg & Stout Bridge Company of Sheridan built the bridge in 1915.
The ENP Bridge over Green River is a historic bridge located near Daniel, Wyoming, which carries Sublette County Road CN23-145 across the Green River. The Western Bridge and Construction Company built the bridge circa 1905. The 221-foot-11-inch (67.64 m) bridge has two spans, both Pratt trusses; the longer span is a Pratt through truss, while the shorter is a Pratt pony truss. The use of both through and pony trusses in the same bridge was uncommon in Wyoming, and the bridge is the only surviving example of a Pratt truss bridge in this style.
The ETD Bridge over Green River is a steel girder bridge near Fontenelle, Wyoming, which carries Sweetwater County Road CN4-8SS over the Green River. The bridge is a replacement for a historic Pratt through truss bridge built in 1913 by the Colorado Bridge and Construction Company. The 150-foot-long (46 m) bridge was one of the longest Pratt through truss bridges built in the early stages of Wyoming bridge construction.
The ETR Big Island Bridge is a Pratt through truss bridge located near Green River, Wyoming, which carries Sweetwater County Road CN4-4 across the Green River. The bridge was built from 1909 to 1910 by contractor Charles G. Sheely. It was named the Big Island Bridge after the Big Island region of Wyoming, which the bridge connected to other parts of the state. The 352-foot (107 m), two-span bridge is one of the older Pratt through truss bridges in Wyoming, and its spans, each 155 feet (47 m) long, are some of the longest on bridges of this design in the state.
The BMU Bridge over Wind River is a Parker through truss bridge located near Ethete, Wyoming, that carries Wyoming Highway 132 across the Wind River. The bridge was built circa 1935 as one of seven Parker truss bridges commissioned by the Wyoming Highway Department. It was moved to its current location in 1953–54. At 283 feet (86 m) long, the bridge is the longest single-span truss bridge still used in Wyoming.
The DFU Elk Mountain Bridge was a Warren pony truss bridge located near Elk Mountain, Wyoming, which carried Carbon County Road 120-1 over the Medicine Bow River. The bridge was built in 1823 by contractor D. B. Miller. While the bridge's design is mainly a Warren truss, the top chord of the bridge is reminiscent of a Parker truss. At 102 feet (31 m) long, the bridge is the longest of its design in the Wyoming county highway system.
The DMJ Pick Bridge is a Parker through truss bridge located near Saratoga, Wyoming, which carries Carbon County Road CN6-508 across the North Platte River. The bridge was built from 1909 to 1910 by contractor Charles G. Sheely; it was originally located south of Fort Steele. In 1934, the bridge was moved up the river to its current location, as a new bridge had been built at its original site five years earlier. The bridge is the only Parker truss bridge remaining in Wyoming, after the Arvada Bridge was replaced in 1990.
The DML Butler Bridge is a historic bridge over the North Platte River in Carbon County, Wyoming, United States, that is listed on the National Register of Historic Places (NRHP).
The DOE Bridge over Laramie River was a Pratt half-hip pony truss bridge located near Bosler, Wyoming, which carried Albany County Road CNA-740 across the Laramie River. The bridge was built in 1926 by contractor N. A. Swenson; it was originally part of the Lincoln Highway. In 1932, the bridge was replaced and moved to its current location. It was the last two-span Pratt half-hip truss bridge remaining in Wyoming.
The DUX Bessemer Bend Bridge was a Warren through truss bridge in Bessemer Bend, Wyoming, which carried Natrona County Road CN1-58 across the North Platte River. The bridge was built from 1921 to 1922. When nominated to the National Register of Historic Places in 1982, it was one of only three Warren through truss bridges remaining on Wyoming county highways. In addition, the bridge was located at the site of a historic river crossing on the Oregon Trail.
The EJE Bridge over Shell Creek is a Warren pony truss bridge located near Shell, Wyoming, which carries Big Horn County Road CN9-57 across Shell Creek. The bridge was built in 1920 by the Midland Bridge Company, the only firm to bid for the bridge contract. At 60 feet (18 m) long, it is the longest known example of a Warren pony truss bridge in Wyoming.
The EJZ Bridge over Shoshone River is a Warren pony truss bridge located near Lovell, Wyoming, which carries Big Horn County Road CN9-111 across the Shoshone River. Contractors McGuire and Blakeslee built the bridge from 1925 to 1926 using a design by the Wyoming Highway Department. The 389-foot-6-inch (118.72 m) bridge has four spans, the second-most of any truss bridge in Wyoming.
The ELS Bridge over Big Wind River is a pony truss bridge located near Dubois, Wyoming, which carries Fremont County Road CN10-21 across the Big Wind River. The bridge was built circa 1920. Its design is uncommon and merges a kingpost truss with an arched chord. The materials used to build the bridge are also unusual and were likely salvaged; for instance, the arches are made from tunnel sets.
The ELY Wind River Diversion Dam Bridge is a Warren pony truss bridge located near Morton, Wyoming, which carries Fremont County Road CN10-24 across the Wind River. The bridge's structure is integrated with the Wind River Diversion Dam; it was the first truss bridge to be connected with a dam during its construction. The Taggart Construction Company built the bridge from 1924 to 1925. The bridge is 655 feet (200 m) long and has eight spans, making it both the longest road truss bridge in Wyoming and the road bridge with the most spans in the state.
The EWZ Bridge over East Channel of Laramie River is a Pratt pony truss bridge that was located near Wheatland, Wyoming, which carried Platte County Road CN8-204 over the East Channel of the Laramie River. The bridge was built from 1913 to 1914 by the Pueblo Bridge Company. The single-span bridge was 71 feet 2 inches (21.69 m) long. The bridge's five-panel Pratt pony truss design with steel pin connections was used fairly frequently in Wyoming highway bridges, and the bridge was one of the older examples of the style.
