| Super 18 | |
|---|---|
 | |
| Role | Amateur-built aircraft |
| National origin | United States |
| Manufacturer | Dakota Cub |
| Status | In production (2012) |
| Number built | 8 (all models, 2011) |
| Developed from | Super 18 Model S18-180 |
The Dakota Cub Super 18 is an American amateur-built aircraft, designed and produced by Dakota Cub of Sioux Falls, South Dakota. The aircraft is supplied as a kit for amateur construction. [1]
The Super 18 is the kit derivative of the type certified Super 18 Model S18-180 that is manufactured by a separate, but affiliated company, Super 18. The Dakota Cub Super 18 features a strut-braced high wing, a two-seats-in-tandem enclosed cockpit that is 28 in (71 cm) wide, fixed conventional landing gear and a single engine in tractor configuration. [1]
The aircraft fuselage is made from welded 4130 steel tubing, with the wing structure of aluminum sheet and all surfaces covered in doped aircraft fabric. The wings are supported by "V" struts and jury struts. Dimensions and engines vary with specific model. Construction time for all models from the supplied kit is 900 hours. [1]
Data from Kitplanes [1]
General characteristics
Performance
The Barrows Bearhawk, now also called the Barrows 4-Place Bearhawk, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Murphy Rebel is a two- or three-seat, strut braced, high wing, taildragger monoplane which is sold in kit form by Murphy Aircraft in Chilliwack, British Columbia, Canada.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Light Miniature Aircraft LM-5 series is a family of American high-wing, conventional landing gear, strut-braced, single-engine ultralight aircraft that are intended to resemble the Piper PA-18 Super Cub. The designs are all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The Bushcaddy L-160 is a Canadian kit aircraft that was designed by Jean Eudes Potvin and produced by Club Aeronautique Delisle Incorporated, Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.
The Bushcaddy L-162 Max is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.
The Bushcaddy L-164 is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.
The Peña Joker and Super Joker are a family of French amateur-built aircraft that were designed by Louis Peña of Dax, Landes and are made available in the form of plans for amateur construction.
The Backcountry Super Cubs Mackey SQ2 is an American STOL amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The Backcountry Super Cubs Supercruiser is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-12 Super Cruiser and is supplied as a kit for amateur construction.
The Backcountry Super Cubs Super Cub, also referred to as the Supercub replica, is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based on the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.
The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The Tapanee Levitation 2 is a Canadian STOL amateur-built aircraft, designed and produced by Tapanee Aviation of Mont-Saint-Michel, Quebec. The aircraft is supplied as a kit for amateur construction.
The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The CubCrafters CC19-180 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.
The Rans S-21 Outbound is an American STOL homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas. It was introduced at AirVenture in 2016. The aircraft is supplied as a quick-build kit for amateur construction or ready-to-fly.
The CubCrafters CC18-180 Top Cub is an American light aircraft designed and produced by CubCrafters of Yakima, Washington, introduced in 2004. The aircraft is type certified and supplied complete and ready-to-fly.
The Murphy Yukon is a Canadian amateur-built aircraft, produced by Murphy Aircraft of Chilliwack, British Columbia, introduced at the AirVenture show in 2007. The aircraft is supplied as a kit for amateur construction.