De Reiger, Nijetrijne

De Reiger, Nijetrijne
De Reiger, April 2007.
Origin
Mill name	De Reiger
Mill location	Veendijk 1, 8481 JC Nijetrijne
Coordinates	52°51′09″N5°55′07″E / 52.85250°N 5.91861°E / 52.85250; 5.91861 Coordinates: 52°51′09″N5°55′07″E / 52.85250°N 5.91861°E / 52.85250; 5.91861
Operator(s)	Private
Year built	1871
Information
Purpose	Drainage mill
Type	Smock mill
Storeys	Two storey smock
Base storeys	Single storey base
Smock sides	Eight sides
No. of sails	Four sails
Type of sails	Common sails
Windshaft	Cast iron
Winding	Tailpole and winch
Type of pump	Archimedes screw

De Reiger (English: The Heron) is a smock mill in Nijetrijne, Friesland, Netherlands which was built in 1871. The mill has been converted into a holiday home. It is listed as a Rijksmonument.

History

The mill was built in 1871 by Jan Hernanus Engelmoer for ƒ9,097, the millers house costing a further ƒ903. It was first set to work on 24 December 1871. ^[1] The mill was built to drain the Grote Veenpolder. It was stopped working in 1956 due to a defect with its Archimedes' screw. Although repaired, the mill finally ceased working early in 1958. It was then converted to a holiday home. Following refurbishment in 1969, the sails were again capable of turning by wind. A further restoration in 2006 saw the mill fitted with new sails, slightly shorter than the originals. Formerly known as Molen №5, the name De Reiger was only given to the mill after it was converted to a holiday cottage. The mill is listed as a Rijksmonument, №38870. ^[2]

Description

For an explanation of the various items of machinery, see Mill machinery.

De Reiger is what the Dutch describe as a Grondzeiler. It is a two storey smock mill on a single storey brick base. There is no stage, the sails reaching almost to ground level. The mill is winded by tailpole and winch. The smock and cap are thatched. The sails are Common sails. ^[1] They have a span of 20.00 metres (65 ft 7 in). ^[2] The sails are carried on a cast iron windshaft. It also carries the brake wheel which has 59 cogs. No other machinery survives in the mill, which had an Archimedes' screw. ^[1]

Operators

• IJsbrand Tijmans de Boer (1871-1905)
• Gerard Blom (1905–11)
• Joh. de Lange (1911–58)

Reference for above:- ^[3]

References

Wikimedia Commons has media related to De Reiger .

Dutch Rijksmonument 38870

1. Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 240. ISBN   90 330 1522 6.
2. "Nijtrijne, Fryslân" (in Dutch). Molendatabase. Retrieved 6 September 2014.
3. "De Reiger te Nijetrijne, Over de Molen" (in Dutch). De Hollandsche Molen. Archived from the original on 6 September 2014. Retrieved 6 September 2014.