The Decauville factory in Val-Saint-Lambert was a Belgian subsidiary of the French narrow-gauge railway manufacturer Decauville. It was founded in 1895 and taken over by the Berlin-based company O&K from 1911.
The Decauville factory in Val-Saint-Lambert was a Belgian subsidiary of the French narrow-gauge railway manufacturer Decauville. It was founded in 1895 and taken over by the Berlin-based company O&K from 1911.
The Decauville company had been authorised by the French government to import Belgian iron temporarily duty-free, which allowed it to offer the material intended for export in all French ports at the same price at which it sold the material intended for France at Évry station. However, Belgium, an important potential customer of Decauville rail track panels, was unable to capitalise on this advantage, as the Belgian government demanded a high duty for the re-importation of its iron. Paul Decauville therefore had a first workshop built in Val-Saint-Lambert, Belgium, as early as 1881. [1] p. 18
In the summer of 1895, the high tariffs in France had a negative impact on the export business of French companies that the protectionists had not expected. The Decauville company therefore planned to set up a factory abroad in order to be able to deliver its goods to non-French countries at lower duty rates. It published a circular stating that it would no longer be able to compete with foreign companies following the recent change in the rules on the authorisation of foreign materials for the manufacture of bonds abroad. It therefore planned to set up a plant in Val-Saint-Lambert near Liège, which would enable it to grant a 20% discount on orders for foreign countries and the colonies. [Note 1] [2]
The works of the Val-Saint-Lambert factory in the municipality of Seraing near Liège consisted of office and factory buildings, residential buildings, steam engines, boilers, a rail siding and land covering an area of 1.26 hectares (3.1 acres). They were located between the railway from Liège to Namur, a towpath of the Meuse, the Les Petits Fils de François de Wendel and the Rue de Flemalle. [3]
In 1911, the French company Société Nouvelle des Établissements Decauville Aîné concluded an agreement with the German company Orenstein & Koppel - Arthur Koppel Aktiengesellschaft (O&K) for a joint venture. At the time, Decauville was the leading light railway dealer in France and its Overseas Territories. The business areas of the two companies therefore complemented each other very well.
The agreement, which was concluded for twenty years, aimed to divide the sales territories. In addition, a reciprocal participation in the business results was agreed, so that O&K was obliged to pay Décauville that percentage of a capital of five million French francs which represented a quarter of the percentage that O&K could distribute as a dividend on its share capital. On the other hand, if Decauville was able to distribute a dividend of more than 12%, it had to pay O&K half of the surplus. If these mutual payments did not equalise, a separate equalisation was to take place within contractually agreed three-year periods. In addition, Decauville was bound to Orenstein & Koppel by comprehensive purchasing obligations, so that O&K secured continuous orders for its factories.
O&K took over the Belgian Décauville plant in Val-Saint-Lambert in 1911 and in return gave Decauville its French plant in Fives. At the same time, an agreement was reached on the sales territories, whereby Decauville took over the French market including the French colonies, O&K the market in the rest of the world. [4] [5] [Note 2] [6] [Note 3] [Note 4] [7]
The Belgian Decauville factory, which had been set up in Val-Saint-Lambert for export, was particularly well positioned for the production of riveted tracks, which Decauville had mastered very well, so that it could often easily prevail over the German track material on the export markets. Decauville was completely superior to O&K in this sector, as O&K often realised. O&K therefore wanted to continue the production of riveted tracks in Val-Saint-Lambert and at the same time convert this factory for the construction of wagons in large quantities, as Belgium was very capable in wagon construction, mainly due to the favourable prices of sheet metal and the much lower labour costs compared to France.
The factory in Val-Saint-Lambert built mainly wagons and carriages for ordinary field and narrow-gauge railways and for mining. [8] [9] [10] The agreement reached on co-operation between the two companies also provided for each of them to have a stake in the other. Thus Hippolyte-Eugène Boyer, the managing director of Decauville, joined the board of directors of O&K, while one of the directors of O&K was a member of the board of directors of Decauville. [8]
After the outbreak of the World War I in 1914, O&K used the facilities left behind by Decauville under the aegis of the occupying army, in particular for the production of military light railways. [11]
Decauville allowed O&K to set up new branches at any time under the name of Decauville, which was known and well-established worldwide in the field of narrow gauge railways. In many countries around the world, the term Decauville railway was used colloquially and even in legal texts as a synonym for all small and narrow gauge railways with a gauge of 600 mm (1 ft 11+5⁄8 in). Decauville took over under his name all the branches that had been founded by O&K in France.
Decauville undertook to order from O&K all locomotives, excavators and self-unloaders, i.e. all products that it could not produce itself in its own factories. O&K foresaw that this agreement would bring it very large orders, because in the 18 months before the contract was concluded, Decauville had ordered about 175 locomotives from Borsig and excavators worth one million (franc?) from [[Orenstein & Koppel#Werk Lübeck|Lübecker Maschinenbau Gesellschaft AG in Lübeck (which was also taken-over by O&K on 17 June 1911)]]. [8] [12]
The entire export business outside France and its colonies was to be reserved entirely for O&K. O&K took over all Decauville branches and agencies abroad and had the right to dissolve or maintain them. O&K was also authorised to set up new branches under the Decauville name at any time if O&K so wished. [8]
Orenstein & Koppel was a major German engineering company specialising in railway vehicles, escalators, and heavy equipment. It was founded on April 1, 1876, in Berlin by Benno Orenstein and Arthur Koppel.
Léon Daudet was a French journalist, writer, an active monarchist, and a member of the Académie Goncourt.
Val Saint Lambert is a Belgian crystal glassware manufacturer, founded in 1826 and based in Seraing. It has the royal warrant of King Albert II.
Decauville was a manufacturing company which was founded by Paul Decauville (1846–1922), a French pioneer in industrial railways. Decauville's major innovation was the use of ready-made sections of light, narrow gauge track fastened to steel sleepers; this track was portable and could be disassembled and transported very easily.
A trench railway was a type of railway that represented military adaptation of early 20th-century railway technology to the problem of keeping soldiers supplied during the static trench warfare phase of World War I. The large concentrations of soldiers and artillery at the front lines required delivery of enormous quantities of food, ammunition and fortification construction materials where transport facilities had been destroyed. Reconstruction of conventional roads and railways was too slow, and fixed facilities were attractive targets for enemy artillery. Trench railways linked the front with standard gauge railway facilities beyond the range of enemy artillery. Empty cars often carried litters returning wounded from the front.
The Tramway de Pithiviers à Toury (TPT) was a 600 mm gauge railway in the Loiret department of France. It was built to carry sugar beet and was 80 kilometres (50 mi) long.
A Luttermöller axle is an unusual steam locomotive component. Steam locomotives with several axles or wheelsets connected to one another by coupling rods are not able to negotiate tight curves well. In order to assist such locomotives, the manager of the Orenstein & Koppel factory in Berlin, Dr. Luttermöller, built the axle system named after him.
The South West African 2-8-0 of 1911 was a steam locomotive from the German South West Africa era.
There have been narrow-gauge railways which used 1,000 mm, 750 mm and 600 mm gauges.
French Morocco had from 1912 to 1935 one of the largest 600 mm gauge network in Africa with a total length of more than 1,700 kilometres (1,100 mi). After the treaty of Algeciras where the representatives of Great Powers agreed not to build any 1,435 mm standard-gauge railway in Morocco until the standard-gauge Tangier–Fes railway being completed, the French begun to build military 600 mm gauge lines in their part of Morocco French Morocco.
The O&K CSÉT Shunting Locomotives were a class of nine small Irish steam locomotives built in Berlin, Germany, by Orenstein & Koppel for shunting wagons of sugar beet at the three Irish Sugar Company factories in Mallow, Thurles and Tuam. They were delivered in two batches, with the first six arriving in 1934 and the last three in 1935. The 1934 batch was paid for by barter, using cattle as payment. Each factory received three locomotives, and numbered them independently, leading to each factory having a No. 1, a No. 2 and a No. 3. Each factory applied their own design of number onto the tanks, and in some cases, bufferbeams, of their respective locomotives.
The South West African 0-6-0T of 1911 was a steam locomotive from the German South West Africa era.
Fives-Lille was a French engineering company located at Fives, a suburb of Lille. It is now part of the Fives Group.
The Waro Limestone Scenic Reserve is a conservation area near Waro near Hikurangi, 16 kilometres (9.9 mi) north of Whangārei on the North Island of New Zealand.
The Decauville Tramway at Exposition Universelle in Gent, 1913 was a temporary narrow gauge railroad with a gauge of 600 mm, which was operated during the World Fair held in Ghent from 26 April to 3 November 1913.
The Decauville railway at Láchar was an 8.3 km (5.2 mi) long narrow-gauge railway with a gauge of 600 mm from Íllora-Láchar railway station via the Eiffel Bridge to the sugar mill in Láchar.
The Decauville railway of the Watissart quarries was a narrow-gauge railway of the quartzite and marble quarries in Jeumont in the Département Nord in the Hauts-de-France region. The former quarries have been flooded to create a lake that is now used as a nature reserve and recreational area for fishing, swimming and diving.
The Decauville factory in Diano Marina produced prefabricated narrow gauge railway track and rolling stock from 1889 to 1895 in Diano Marina, Italy.
The Decauville railway of Suberbieville was a Decauville narrow-gauge railway near Maevatanana in Madagascar. It initially had a track gauge of 600 mm and after the arrival of six steam locomotives in 1896, it was metre gauge.
50°36′41″N5°29′39″E / 50.611336°N 5.494264°E
| Railways |
| ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tramways |
| ||||||||
| Factories |
| ||||||||
| Related | |||||||||
