Devin Enterprises

Last updated
Devin Enterprises
IndustryAutomotives
Founder Bill Devin
Products
  • Parts and accessories
  • Body kits
  • Complete automobiles

Devin Enterprises was an American automotive manufacturer that operated from 1955 to 1964. Devin was mainly known for producing high quality fiberglass car bodies that were sold as kits, but they also produced automotive accessories as well as complete automobiles. The company was founded by Bill Devin.

Contents

The assets and intellectual property of Devin Enterprises were acquired by Devin Sports Cars LLC of Glendale California U.S.A, incorporated in 2001. [1] :64 [2] These assets and intellectual properties were then acquired in 2019 by Devin Sports Cars, LLC of Abington Pennsylvania U.S.A, where they exist today.

The Devin Panhard

Devin Panhard 1954 Devin Panhard 850.jpg
Devin Panhard

When Bill Devin sold his Ferrari 250 MM coupe to a buyer in Michigan in 1954 he took a 1953 Deutsch-Bonnet Le Mans barquette in trade as partial payment. [1] Devin also bought out the stock of a Panhard dealer in California, acquiring ten chassis with engines but no bodies. [3] :61

Devin designed his own ladder frame for a custom race car that used the engine and front-wheel drive transaxle from the Panhards. The wheelbase of this chassis was 2,134 millimetres (84 inches). Devin also took a mold of the body of the DB Le Mans, made some changes, and began to produce custom bodies for his new car. [4] This was his first experience working with fiberglass.

With help from Norton motorcycle racer Don Evans, Devin adapted the cylinder barrels, cylinder heads and pistons from the Norton Manx motorcycle to the two-cylinder boxer Panhard crankcase, roller-bearing crankshaft assembly and piston rods. [1] :62 [5] He then fabricated a custom manifold that accepted two-barrel side-draft Weber carburetors. All of these alterations did not affect the displacement of the engine, leaving the 79.5 mm bore and 75 mm stroke unchanged for a total displacement of 745 cc.

What made the engine unique was the method Devin used to operate the valves. He abandoned the Panhard's pushrod OHV system and contacted the L. H. Gilmer company about using their toothed belts to drive the Manx cylinder heads' overhead cams. [5] Development of synchronous toothed-belts was begun by the Gilmer company around 1940. [6] Their primary application had been as a means of transmitting power in textile mills. [7] Devin's use of the technology to drive the valve train in the Devin-Panhard engine was the first time toothed belts were used in a timing belt application. Devin did not apply for a patent on this innovation. [1] :62

The Devin-Panhards went into production in 1955 with engine options that included OHV, SOHC and DOHC variations of 750 cc and later 850 cc displacements. Another version of the engine came with a MAG supercharger, which bumped the car up into the 1100 cc class.

Devin bodies and kits

In their earliest advertising copy Devin Enterprises listed a mailing address of P.O. Box 357, Fontana, California. Later on they used a street address of 44500 Sierra Highway, Lancaster, California and later still 10156 Rush, South El Monte, California before moving operations to their most well-known location at 9800 E. Rush Street, El Monte, California.

1957 Devin MG with a Chevrolet V8 1957 Devin MG Chevrolet.JPG
1957 Devin MG with a Chevrolet V8
The real Scaglietti-bodied Ferrari 750 Monza of 1955 Paris - RM Auctions - 5 fevrier 2014 - Ferrari Monza Spider - 1955 - 001.jpg
The real Scaglietti-bodied Ferrari 750 Monza of 1955

After gaining experience making complete fiberglass bodies with the Devin-Panhards, Devin Enterprises expanded into production of fiberglass bodies to be sold to builders of custom and one-off specialty cars. [1] Production started in 1956.

The first design Devin produced was an attractive roadster-style body.

The most commonly attributed source for the Devin body's shape is that it was developed from a mold taken of an Ermini 357 Sport 1100 with aluminium bodywork by Scaglietti. [8] The car was serial number 1255, and was owned by James Orr, who was a friend of Bill Devin's and who had raced the second Devin-Panhard ever produced. [9] [10] The Ermini's body closely resembled the design that Scaglietti had done for the larger Ferrari 750 Monza, and some of Devin's own early ad copy refers to these bodies as Devin Monzas. This body was advertised widely at a price of US$295.00, and so at times is also called the '295' body.

Apart from the appealing shape and reasonable price, two things distinguished the Devin bodies from their competition. One was the wide range of sizes of bodies available. The Devin body mold was not a simple one-piece shape. Instead, an assortment of 50 differently-sized molds of individual sections of the body were used. These could be assembled in a variety of ways to create one of 27 possible sizes for a customer's fiberglass body. [11] This allowed the company to produce a recognizable Devin body that would fit a wide variety of chassis, from the tiny Crosley, through the British MGs, Triumphs and Healys right up to some American car frames.

The other feature that made the Devin bodies popular was the high quality of the finish. Devin used fibreglass cloth for the outer layer of their bodywork rather than the coarser glass mat often used by other manufacturers. [1] This produced a very smooth surface finish on the bodies. Devin bodies were always very smooth and the quality of finish on panel edges and large flat surfaces was often better than that of competitors' products. [1]

Later, kits could be bought that included a Devin-designed ladder frame as an option along with the body.

Devin quickly became the world's largest and most successful producer of aftermarket fiberglass bodies. [12] Between direct sales and dealers Devin bodies were delivered throughout the Americas as well as Europe, South Africa and Saudi Arabia.

Well-known Specials


The wide range of sizes that the Devin body was made in allowed it to be used on a very broad spectrum of cars. Rebodied Alfas, MGs, Triumphs and Healys were common as were specials built from a variety of American parts. Devin bodies were also fitted to rear-engined Volkswagens, Porsches, and Renaults as well as a front-wheel drive Panhard Dyna (distinct from the Devin-Panhards). Many of these cars became successful racers. Others became known because of who their builder or owner was. This is selection of these specials.

Ak Miller Specials

Akton "Ak" Miller was a long-time hot-rodder and racing driver as well as NHRA vice-president. [13] He built a series of five or six Miller-Devin specials powered by a variety of engines. [14] Three of the cars raced at the Pikes Peak hill climb. [1] :135–136

Miller built his first Devin-bodied special in 1958 for the Pikes Peak hill climb. Built to run in the sports car class that had been announced the previous year, the car was named the Hot Rod Magazine Special in honor of its sponsor. [1] :135 Miller fabricated a custom steel tube frame that used a coil-spring front suspension from a 1956 Chevrolet and a Ford rear axle with a Halibrand quick-change differential. Springing was by torsion bars. The engine was a small-block Chevrolet that had been bored and stroked to 5,572 cubic centimetres (340 cubic inches) and equipped with Hilborn injection. The 4-speed manual transmission was from a Corvette. The finished car weighed 816 kilograms (1,800 pounds). Miller's Devin-Chevy won its class at Pikes Peak that year.

The next year Miller built an all-new car with another Devin body. A new ladder chassis of steel tube was used, with front suspension from a 1953 Chevrolet. Brakes came from a 1952 Lincoln and the steering box from a 1937 Ford. This car was also called the Miller-Hanson Special in recognition of George Hanson, who had fronted the $1800 needed to build the car. The engine for the Miller-Hanson special was an Oldsmobile, modified to displace 6,883 cubic centimetres (420 cubic inches) and fitted with four Rochester carburetors mounted on a drag racing intake manifold. The transmission was the same as that used in the Miller-Chevy. The total weight of the car was 953 kilograms (2,100 pounds). At the Pikes Peak climb the car developed engine problems but still won its class. The next year Miller could only manage fourth place, but when the car went back to Pikes Peak in 1961 it won again.

The third Miller special was built in 1962. Ford had approached Miller and arranged for him to use a factory-stock 406 FE V8 engine. The car won again at Pikes Peak that year. The following year it would win again, this time with a Ford 427 engine. After the 1963 race, the car was retired and converted for street use. For 1964 a new car was built using an AC Bristol chassis and a 289 CID engine. The car was renamed the Cobra Kit Special. It did not win that year but returned to the winner's circle in 1965. In 1966 the engine was once again a Ford 427 and this would be the final Miller win in the sports car class at Pikes Peak. The following year the class was discontinued.

Dean Moon "Moonbeam" Special

Dean Moon, dry lake racer and founder of MOON Speed Equipment, built a Devin-bodied special called Moonbeam in partnership with NHRA president Wally Parks. The car was meant to be the first of a series of cars optimized for straight-line runs on the drag strip and the Bonneville salt flats. [15] A box-type frame was fabricated from mild steel tubing by Harley Klentz. [16] The chassis had a track width of 1,270 millimetres (50 inches) and a nominal wheelbase of 2,540 millimetres (100 inches), but the wheelbase could be adjusted by up to 102 millimetres (4 inches). Front and rear axles were both solid, with the front being an I-beam unit from a Ford and the rear also being Ford but with a Halibrand quick-change center. Suspension was done by Monroe coil-over shock absorbers and the axles were located by trailing arms and a Watt's linkage. Brakes were Mercury-Bendix and the wheels were magnesium Halibrands. The first engine used was a 4,965 cubic centimetres (303 cubic inches) Chevrolet small-block V8 with a GMC 4-71 Roots-type supercharger blowing through a Potvin intake manifold and Hilborn fuel injection. When this engine did not perform as expected, it was replaced with a 4,769 cubic centimetres (291 cubic inches) Chevrolet.

Moonbeam held strip records at the Pomona, Henderson Nevada, Riverside (quarter- and half-mile), and San Gabriel tracks and also held the Modified Sports and the 1320 record of the American Hot Rod Association. [17]

The Echidnas

The Echidnas were three Devin-bodied specials built by Ed Grierson, Bill Larson, and John Staver. [18] The Echidnas were built on shortened, narrowed 1956 Chevrolet passenger-car frames with custom cross-bracing. Front suspension was independent using many stock Chevrolet sedan and Corvette parts including coil-springs, links, a-arms and, at least initially, steering boxes. Morris Minor rack-and-pinion steering was adapted later. Brakes were Corvette drums all around and the wheels were standard Corvette items. The rear suspension was a narrowed Chevrolet live axle with Positraction that was located originally on factory leaf springs, but in later revisions by trailing arms (one or two per side depending on version) and a Watt's linkage. The early engines were Chevrolet small-block V8s displacing 4,638 cubic centimetres (283 cubic inches) with Rochester fuel injection. A later change put a 5,555 cubic centimetres (339 cubic inches) engine in one car. The transmission was a BorgWarner T-10 4-speed manual. An article in the May 1960 edition of Sports Cars Illustrated magazine said that to the date of the article the Echidnas had managed eight overall firsts and 17 firsts in their class, finishing first, second or third a total of 19 times overall. The same article reported that the Echidna's designers were considering building a fourth chassis as a test-bed for investigating independent rear suspensions.

Clair Reuter Bandini Devin Crosley

Cliff Reuter has documented the history of a Bandini 750 Siluro that he acquired from the estate of the late Clair Reuter. [19] This car received its Devin body when the SCCA stopped allowing cycle-fendered cars to compete. [20] These 750 Bandinis used either a modified Crosley CIBA SOHC engine or a more highly customized Bandini-Crosley with a Bandini DOHC cylinder-head.

Richard Boone Devin-Porsche

Richard Boone owned a Porsche Speedster that was damaged while he was on location. In the May 1958 edition of Motor Trend magazine the actor himself wrote about the car and having Devin do the customization. [21] This car was believed to have been lost in a fire at Boone's home but there is some recent evidence that the car survived. [22]

Accessories

In addition to the bodies and frames, Devin sold a growing assortment of accessories needed to complete the car. Some of these items were developed by Devin Enterprises, such as hinges and catches. One piece of advertising copy from 1960 lists a "universal" intake manifold for the Chevrolet V8 as well as a finned alloy differential housing for a de Dion rear suspension. Other items sold included everything from suspension parts, disk brakes or finned alloy brake drums up to wood-rimmed steering wheels, flip-up filler caps for fuel or oil tanks, Borrani wire wheels with knock-offs, custom gauges, and BID clutch plates.

Devin Junior

For several years in the late 1950s Devin offered what they described as a "Gas Engine Powered Miniature Sports Car". [23] The brochure for the Devin Junior said that it was not a toy but rather a scale replica of "a famous American sports roadster". The Junior was offered in two versions; standard and deluxe. The standard version was priced at the same US$295.00 as a full-sized Devin body. The deluxe version came with a semi-flexible plastic safety windshield, padded headrest and washable interior upholstery and sold for US$319.00. Powering both versions was a 2 HP gas engine (e.g., a Continental four cycle engine, a standard in quarter midget racing). The Junior measured 2,210 mm (87 in) long by 914 mm (36 in) wide and 533 mm (21 in) high to the top of the cowl. The head rest added 76 mm (3 in) to the overall height. The wheelbase was 1,245 mm (49 in) long and the track front and rear was 787 mm (31 in).

Devin SuperSport

Devin SS (1958) 1958DevinSS.jpg
Devin SS (1958)

In 1957 Devin was contacted by two textile engineers from Belfast, Northern Ireland. Noel Hillis owned a hemstitching company called Devonshire Engineering, and Malcolm MacGregor worked for Hillis. Both men were racing enthusiasts who decided to build their own car. Hillis provided the workshop space while MacGregor designed the chassis. They wrote to Devin to ask about arranging for a custom body for their car. Bill Devin was interested enough in the project that he flew to Ireland to look at the car. Instead of selling them a body, Devin negotiated a deal with the two Irish engineers for MacGregor's chassis to be used for a new Devin car.

Devin asked for some changes for the final car. For the main chassis members, 76 mm (3 in) round cross-section tubing replaced the 102 mm (4 in) diameter tubing in the prototype. The 2,337 mm (92 in) production wheelbase was a compromise between the 2,286 mm (90 in) of the prototype and the 2,388 mm (94 in) that Devin had originally asked for. The battery and generator were relocated to the rear of the car, with the generator being driven off a pulley at the differential.

The ladder-type chassis used 51 mm (2 in) tubing for the front and rear sub-structures. Front suspension was by equal-length upper and lower A-arms. The early tubular steel arms were replaced by forged aluminum in later cars. At the rear were two trailing links per side and a de Dion axle with a 3.73:1 ratio Salisbury differential that received a finned aluminum cover made by Devin. A Woodhead-Monroe coil-over-shock-absorber at each wheel handled springing and damping. Brakes were by Girling, with 305 mm (12 in) disks at the front and 279 mm (11 in) disks mounted inboard at the rear. Dunlop tires were mounted on Dunlop knock-off wire wheels. Steering was by a BMC rack-and-pinion unit with 2.5 turns lock-to-lock. [24] The interior had two bucket seats and was trimmed in carpet. The dash, designed for either left- or right-hand drive builds, had Stewart-Warner gauges, including a 200 mile-per-hour speedometer and a 10,000 RPM tachometer.

Devin designed a new body specifically for the car. The front-mounted radiator was angled forward, and the car did not come with a radiator fan, which combined to permit an extremely low nose. While early bodies had a rounded rear, later versions had a raised and flattened rear with room for a license plate. Later cars also had enlarged headlamp buckets.

The prototype's Jaguar DOHC inline six-cylinder engine was replaced by a 4,638 cc (283 cu in) Chevrolet OHV small-block V8. In Devin tune this engine had a low-rise intake manifold made by Devin and a Spaulding "Flamethrower" ignition and developed 164 kW (220 bhp) of power, which went to the rear wheels through a BorgWarner T-10 4-speed manual transmission. This resulted in a 988 kg (2,179 lb) car with a 0–100 km/h time of 4.8 seconds and a top speed of 225 km/h (140 mph).

The new car was called the Devin Super Sport, or SS. The rolling chassis was built in Ireland and then shipped to El Monte where the body and power-train was fitted and the interior trimmed. Released in 1959, the SS was initially priced at US$5950.00.

Art Evans partnered with his father and Ocee Ritch to make Evans Industries the sole distributor for the SS.

Due to a variety of issues with the Irish chassis Devin designed a replacement that was made in California and was called the American chassis. The price for the cars made with the American chassis rose to US$10,000.00 in the last year of production.

Evans Industries ended their distributor relationship with Devin in a press release dated March 9, 1960. [25]

Devin D

Devin D Porsche (1957) Devin D 1.JPG
Devin D Porsche (1957)

In 1958 Devin released a new model named the Devin D. This model came with a new body style and was built on a Devin-designed ladder chassis with a wheelbase of 2,083 mm (82 in). The front suspension of transverse torsion bars and trailing links was from Volkswagen, while single coil-over-dampers and trailing arms were used at the rear. The buyer had the choice of rear-mounted air-cooled four-cylinder boxer engines from either Volkswagen or Porsche. The VW engine displaced 1,191 cc (73 cu in) and developed 26.8 kW (36 bhp) at 3700 rpm, while the Porsche engine displaced 1,586 cc (97 cu in) and made 52.2 kW (70 bhp) at 4500 rpm. The Devin D could be bought in kit form, with a basic body-and-frame kit costing US$895.00. A much more complete kit that included a laminated safety glass windshield, folding soft top, side curtains, upholstery and leather-covered bucket seats, chrome bumpers, brake and fuel line, and working head, tail, parking and directional lights was priced at US$1495.00. A turn-key car powered by the VW engine cost US$2950.00, while one with Porsche power was US$3350.00. [1] :64 Production of the Devin D is estimated to have totaled 46 cars.

Devin C

Eight of the original Devin C sports cars were featured at The Quail, A Motorsports Gathering in 2017 Devin C's at The Quail 2017.jpg
Eight of the original Devin C sports cars were featured at The Quail, A Motorsports Gathering in 2017

In 1959 Devin took the body of the D model and revised the chassis to accept the newly introduced Chevrolet six-cylinder, horizontally-opposed, air-cooled engine known as the "Chevrolet Turbo-Air 6 engine" and 4-speed transaxle as used in the Chevrolet Corvair. Rear suspension and brakes from the Corvair were also part of the package. The resulting car was called the Devin C. Like the Devin D, it was offered as a component car in kit form with a painted body already bonded to the frame, laminated windshield, and doors and deck lids already attached or as a completed car built by Devin Enterprises. The Devin C was priced at US$2500.00 in kit form or US$4500.00 for a fully assembled car. [1] :64

The prototype Devin C weighed just 1,380 lb (626.0 kg) and used a 2,376 cc (145 cu in) displacement engine initially rated at 59.7 kW (80 bhp) at 4400 rpm and 173.5 N⋅m (128 lb⋅ft) at 2300 rpm. Shortly after its introduction to the press, [26] the world-renowned Granatelli Brothers arranged to borrow the only completed Devin C for six weeks. A Paxton centrifugal supercharger was installed with the objective of setting a record at the Bonneville Speed Trials. Bad weather and lack of time prevented an official run but an unofficial top speed of over 165 mph (265.5 km/h) was achieved. The car then made appearances at several Southern California drag strips setting record breaking runs until it was turned away by track owners; few competitors wanted to be embarrassed by the little gold supercharged Devin C. [27]

With the supercharger removed from the engine, racing driver Pete Woods, [28] qualified for the October 1961 L.A. Times-Mirror Grand Prix at Riverside International raceway alongside Jim Hall, Dan Gurney, Stirling Moss, Roger Penske, Bruce McLaren and other international racing champions. The car was a DNF but Woods and Devin weren’t done racing a Devin C. [29]

Subsequent improvements to the Corvair engine by Chevrolet raised output to 90 hp and then 102 hp. In April 1962, Chevrolet introduced a 150 hp turbocharged Spyder engine and made one available to Devin. The second completed Devin C was shown at the New York Auto Show sporting Girling disc brakes on all four wheels. After the show, now owner Pete Woods drove the white car to Colorado where the new factory turbocharged engine was installed. He then drove the car in the 1962 Pikes Peak International Hill Climb, climbing 5,000 feet and covering twelve miles of dirt and gravel road course with a 16:12 elapsed time. Woods then drove the car home to Los Angeles. [1]

Later, cars were constructed with the 164 cu in (2,687 cc) engine in standard form producing 110 hp. Optional engines included the new Corsa 4-carb 140 hp ‘big valve’ engine and the revised Corsa 180 hp turbocharged mill, both displacing 164 cu in. Approximately 25 Devin Cs were built by Devin Enterprises between 1959 and 1965 when production ended. [30]

The Roosevelt-Devin

In 1959 Bill Devin was put in touch with the manager of Franklin D. Roosevelt Jr.'s racing team. [31] The introduction came by way of mutual acquaintance Skip Callanan. The Roosevelt team was interested in having Devin Enterprises rework a Fiat-Abarth into a lighter car with improved braking. They also wanted to have an easy way to change gear-ratios to adapt to different racing courses.

The Fiat frame was abandoned in favor of a new space-frame chassis built by Devin that weighed just 18 kg (40 lb). This frame duplicated the locations of the original unit's suspension mounting points, allowing the original Fiat front and rear suspension to be reused. That suspension was a transverse leaf spring with A-arms and tube-shocks in front and semi-trailing arms with coil springs and tube-shocks in the rear. The stock drum brakes were replaced by 305 mm (12 in) disks made by Cagle. The engine was rotated 180 degrees from its rear-engine location in the original car to a mid-engine layout in the Roosevelt-Devin. The Fiat 600 transaxle also received a set of Harley Klentz Quick Change Gears. [1]

The Fiat body was replaced with a new Devin hard-top unit that also weighed just 18 kg (40 lb). Overall the finished car weighed just 363 kg (800 lb).

Devin GT

In 1963 Bill Devin began construction of the Devin GT Coupe. The Devin GT was the final model developed by Devin Enterprises. This hardtop grand tourer had the same chassis and power-train as the Devin C but came with a significantly revised body shape. The car's bumpers were made of Neoprene and were integrated into the body shape. [32] The new coupe configuration had a fastback roof with full-size doors that extended into the roof, glass side windows, larger headlamps and re-positioned turn indicators. This car was described as a Luxury Sports Car, and the quality of finish and attention to detail were emphasized in the promotional materials along with the leather interior, deep-pile carpets and convenience lighting features. Buyers would have had the ability to customize their car's appearance during construction. The Corvair engine in the GT produced 82 kW (110 hp). Combined with the light weight of the car this resulted in a 0-60 mph time of 5 seconds, a 0-100 mph time of 13 seconds and a top speed of 193 km/h (120 mph). Braking was by drums.

Two cars were planned to be shown at the 1964 New York Auto Show but only one was completed in time. [1] The car was well received and an order was placed for 60 Devin GTs by Imported Cars of Greenwich, Conn. but Devin did not have sufficient financial backing to produce that number of finished cars in the time required by the investor. The financier that helped produce the single show car disappeared with the car. The remaining Devin GT Coupe was finished after Bill's passing in 2000 and was shown at The Quail, A Motorsports Gathering in 2009.

Car Specifications

Devin-PanhardDevin SSDevin DDevin CRoosevelt-Devin
Year(s) built:19541958-19591958-19651959-19651960
Engine:750 cc (45.8 cu in)4,637.5 cc (283 cu in)1,191 cc (73 cu in) or
1,586 cc (97 cu in)
1961-1963: 2,369 cc (145 cu in)
1964-1966 2,679 cc (163 cu in)
747 cc (45.6 cu in)
Panhard OHV boxer twin. Optional belt-driven single or dual overhead camshaft; optional superchargerChevrolet Corvette OHV V8Volkswagen OHV Boxer four
Porsche OHV boxer four
Chevrolet Corvair OHV boxer sixAbarth Bialbero DOHC four
Gearbox:Panhard four-speed manualBorgWarner four-speed manualVolkswagen four-speed manualCorvair four-speed manualFiat 600 four-speed manual
Chassis:ladderladderladderladderspace-frame
Front suspension:Panhard independent with transverse leaf springIndependent with coil springsVolkswagen transverse torsion-bar and trailing linkVolkswagen transverse torsion-bar and trailing linkFiat independent with transverse leaf spring
Rear suspension:Panhard semi-independent with torsion barsde Dion with coil springsSwing axleChevrolet Corvair Swing axleSwing axle with coil springs
Brakes:Panhard drumsGirling discVolkswagen or Porsche drumChevrolet Corvair drum on VW spindles front & Corvair drums rearCagle four-wheel disc
Weight (approx.):431 kg (950 lb)984 kg (2,170 lb)535 kg (1,180 lb)635 kg (1,400 lb)363 kg (800 lb)
Wheelbase:2,134 mm (84 in)2,337 mm (92 in)2,083 mm (82 in)2,083 mm (82 in)2,083 mm (82 in)
Length:3,810 mm (150 in)4,166 mm (164 in)3,886 mm (153 in)3,810 mm (150 in)
Height:991 mm (39 in)1,118 mm (44 in)1,168 mm (46 in)1,118 mm (44 in)1,118 mm (44 in)
Number built:6 – 1218 (Irish chassis),
<10 (American chassis)
46251
Price new:$2,850.00$5,950 (later $10,000)$2,950 to $3,350, depending on engine selection$4,500

Motorsports

Related Research Articles

<span class="mw-page-title-main">Chevrolet Impala</span> American full-size car

The Chevrolet Impala is a full-size car that was built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 to 2020. The Impala was Chevrolet's popular flagship passenger car and was among the better-selling American-made automobiles in the United States.

<span class="mw-page-title-main">Chevrolet Bel Air</span> American full-size automobile

The Chevrolet Bel Air is a full-size car produced by Chevrolet for the 1950–1981 model years. Initially, only the two-door hardtops in the Chevrolet model range were designated with the Bel Air name from 1950 to 1952. With the 1953 model year, the Bel Air name was changed from a designation for a unique body shape to a premium level of trim applied across a number of body styles. The Bel Air continued with various other trim level designations, and it had gone from a mid-level trim car to a budget fleet sedan when U.S. production ceased in 1975. Production continued in Canada, for its home market only, through the 1981 model year.

<span class="mw-page-title-main">Pontiac Catalina</span> Motor vehicle

The Pontiac Catalina is a full-size, junior series automobile produced by Pontiac from 1950 to 1981. Initially, the name was a trim line on hardtop body styles, first appearing in the 1950 Chieftain Eight and DeLuxe Eight lines. In 1959, it became a separate model as the "entry-level" full-size Pontiac.

<span class="mw-page-title-main">Chevrolet El Camino</span> Motor vehicle

The Chevrolet El Camino is a coupé utility vehicle that was produced by Chevrolet between 1959–60 and 1964–1987. Unlike a standard pickup truck, the El Camino was adapted from the standard two-door Chevrolet station wagon platform and integrated the cab and cargo bed into the body.

<span class="mw-page-title-main">General Motors Y platform</span>

The Y platform, or Y body, designation has been used twice by the General Motors Corporation to describe a series of vehicles all built on the same basic body and sharing many parts and characteristics. The first was for a group of entry-level compacts including the conventional front-engine compacts built by GM divisions Buick, Oldsmobile and Pontiac from 1961 to 1963. The second, and current, incarnation is used for a high-end rear-wheel drive sports-car platform from the 1970s through the 2000s.

<span class="mw-page-title-main">Chevrolet Chevy II / Nova</span> Motor vehicle

The Chevrolet Chevy II/Nova is a small automobile manufactured by Chevrolet, and produced in five generations for the 1962 through 1979, and 1985 through 1988 model years. Nova was the top model in the Chevy II lineup through 1968. The Chevy II nameplate was dropped after 1968, with Nova becoming the nameplate for all of the 1969 through 1979 models. Built on the X-body platform, the Nova was replaced by the 1980 Chevrolet Citation introduced in the spring of 1979. The Nova nameplate returned in 1985, produced through 1988 as a S-car based, NUMMI manufactured, subcompact based on the front wheel drive, Japan home-based Toyota Sprinter.

<span class="mw-page-title-main">Gilbern</span> Motor vehicle

Gilbern, Gilbern Sports Cars (Components) Ltd , was a Welsh car manufacturer from 1959 to 1973, based in Llantwit Fardre, Pontypridd, Glamorgan, Wales.

<span class="mw-page-title-main">Fiberfab Valkyrie</span> Motor vehicle

The Valkyrie is a GT sports car introduced in 1966 by the Fiberfab company. The Valkyrie's styling was inspired by the lines of the Ford GT40.

William Elbert Devin Junior was an American businessperson, automotive entrepreneur and racing driver. He is primarily known as the founder of Devin Enterprises, a company that built fiberglass body-kit conversions and complete automobiles.

Sylva Autokits is a kit car manufacturer based in Lincolnshire, England. Sylva was founded in 1981 by Jeremy Phillips and has developed and produced a number of small and lightweight sports cars. Sylva cars have won a number of 750 Motor Club Kit Car championships.

<span class="mw-page-title-main">Chevrolet Camaro (fifth generation)</span> Motor vehicle

The fifth-generation Chevrolet Camaro is a pony car that was manufactured by American automobile manufacturer Chevrolet from 2010 to 2015 model years. It is the fifth distinct generation of the muscle/pony car to be produced since its original introduction in 1967. Production of the fifth generation model began on March 16, 2009 after several years on hiatus since the previous generation's production ended in 2002 and went on sale to the public in April 2009 for the 2010 model year.

<span class="mw-page-title-main">Kelmark Engineering</span> Defunct American automotive specialty shop

Kelmark Engineering was an American automotive specialty shop established in 1969 and based in Okemos, Michigan. It focused on high-performance custom V8 drivetrain swaps, the modification and production of rear and mid-engined cars, and custom-built turn-key automobiles. Until 1986, Kelmark Engineering manufactured kits and complete, finished, turn-key vehicles which were either Volkswagen-based or built on tubular race car-type frames. The outfit gained its name from Russ Keller and Randy Markham, the two co-creators who started the operation. Up until at least 1989, the Kelmark GT was still available as a kit albeit the manufacturer was Kelmark Motors in Holt, Michigan. The cars are all "rare" models, but the Volkswagen-powered Kelmark GT was the most popular.

<span class="mw-page-title-main">Blakely Bernardi</span> Motor vehicle

The Blakely Bernardi is an automobile produced in the 1980s by Blakely Auto Works of Princeton, Wisconsin, USA. Blakely produced a number of automobile models, including the Bearcat and Bantam. This model is named after Enrico Bernardi, Italian inventor of the gasoline internal-combustion engine and automobile pioneer. The Bernardi was available as a completed car or as a kit of parts to be assembled by the buyer.

<span class="mw-page-title-main">Bandini Formula Three</span>

The Bandini formula three is a racing car model produced from 1954 until 1958 by Bandini Automobili of Forlì.

<span class="mw-page-title-main">Chevrolet Impala (fourth generation)</span> Motor vehicle

The Chevrolet Impala (fourth generation) are full-size automobiles produced by Chevrolet for the 1965 through 1970 model years. The 1965 Impala was all new, while the 1967 and 1969 models featured new bodies on the same redesigned perimeter frame introduced on the 1965 models. All Impalas of this generation received annual facelifts as well, distinguishing each model year. Throughout the early 1960s, Chevrolet's basic body designs became increasingly subtle, while the bright trim that was part of the Impala package added more than a touch of luxury to the look. The same pattern was followed in the interiors, where the best materials and equipment Chevrolet had to offer were displayed. In short, the Impala was on its way to becoming a kind of junior-grade Cadillac, which, for both the company and its customers, was just fine.

<span class="mw-page-title-main">Chevrolet van</span> Motor vehicle

The Chevrolet Van or Chevy Van is a range of vans that was manufactured by General Motors from the 1964 to 1996 model years. Introduced as the successor for the rear-engine Corvair Corvan/Greenbrier, the model line also replaced the panel van configuration of the Chevrolet Suburban. The vehicle was sold both in passenger van and cargo van configurations as well as a cutaway van chassis that served as the basis for a variety of custom applications.

<span class="mw-page-title-main">Chevrolet Corvette (C7)</span> Seventh generation of the Corvette sports car

The Chevrolet Corvette (C7) is the seventh generation of the Corvette sports car manufactured by American automobile manufacturer Chevrolet from 2014 until 2019. The first C7 Corvettes were delivered in the third quarter of 2013.

The Audi R8 LMS Cup was a one-make sports car racing series by Audi based in Asia. Audi R8 LMS Cup cars were based on the Audi R8 LMS (GT3).

<span class="mw-page-title-main">Panhard Dyna Junior</span> Motor vehicle

The Panhard Dyna Junior is a small sports car built by Panhard from 1952 until 1956. The car was initially offered as a roadster and later as a cabriolet. Slightly over 4,700 were built.

<span class="mw-page-title-main">Chevrolet C/K (second generation)</span> American truck series

The second generation of the C/K series is a range of trucks that was manufactured by General Motors. Marketed by both the Chevrolet and GMC divisions from the 1967 to 1972 model years, this generation was given the "Action Line" moniker by General Motors. As with its predecessor, the second generation C/K included full-size pickup trucks, chassis cab trucks, and medium-duty commercial trucks.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pace, Harold (December 25, 2004). Vintage American Road Racing Cars, 1950-1970. Motorbooks. ISBN   978-0760317839.
  2. "Devin". www.trademarks411.com.
  3. 1 2 "The Devin Panhard". Archived from the original on April 8, 2014.
  4. "Devin's Kit Kar". Sports Cars Illustrated. September 1955.
  5. 1 2 Ritch, Ocee (May 1957). "Small bore... big pull!". Sports Cars Illustrated. Archived from the original on April 8, 2014. Retrieved April 9, 2008.
  6. "Synchronous Belts - Part I" (PDF). ww2.gates.com. Archived from the original (PDF) on 2016-08-09.
  7. "Timing Belts" (PDF). training.bsc.com.au. Archived from the original (PDF) on 2017-02-18. Retrieved 2017-02-15.
  8. "Devin's Father: The Ermini 357". www.velocetoday.com.
  9. "Tony Pompeo: Etceterini Man". www.velocetoday.com.
  10. "Notes from the Archive – James Orr". www.sfrscca.org.
  11. "Devin Renault Special-1959". www.lanemotormuseum.org.
  12. Bob Rolofson (1958). "Special Specialisers". Sports Car Specials.
  13. "Ak Miller History – The Best Hot Rodder in the World". www.hotrod.com.
  14. "From Ron Cummings". www.tamsoldracecarsite.net.
  15. Griff Borgeson (July 1960). "Dean Moon's Moonbeam". Sports Cars Illustrated.
  16. "Dean Moon". www.kustomrama.com.
  17. "Dean Moon's Moonbeam – One Superfast Devin Sports Car". www.forgottenfiberglass.com.
  18. Dic Van der Feen (May 1960). "Three Who Thought Things Through". Sports Cars Illustrated.
  19. "1951 Bandini Siluro Motto Crosley Mercury 750 cc Devin Monza". ferrariexperts.com/etceterini.
  20. "The Reuter Bandinis". www.velocetoday.com.
  21. Richard Boone (May 1958). "Have Car - Will Travel (Paladin)". Motor Trend.
  22. "Richard Boone's Devin in Norway?". www.devinspecial.com.
  23. "The Great New Devin Junior – Gas Engine Powered Miniature Sports Car". www.forgottenfiberglass.com.
  24. "1957 Devin SS". auto.howstuffworks.com. Archived from the original on 2017-02-15. Retrieved 2017-02-15.
  25. "Evans Industries Becomes Victress and Byers Distributor: Spring 1960". www.forgottenfiberglass.com.
  26. Sports Car Graphic. October 1961.
  27. Vintage Motorsports. March–April 1991.
  28. "Pete Woods".
  29. Sports Car Graphic. January 1962.
  30. Devin Registry.
  31. "The Roosevelt Devin". Archived from the original on September 12, 2013.
  32. "The 1964 Devin GT-Coupe". Archived from the original on September 13, 2013.
  33. "Devin SS". www.racingsportscars.com.
  34. "Devin Special". www.racingsportscars.com.
  35. Davis, Larry. Gasser Wars (Cartech, 2003), pp.184-5.

Further reading