Ferrari Monza

Last updated
Ferrari Monza
1955-07-23 GP Lisboa Ferraris Palma.jpg
Overview
Manufacturer Ferrari
Also calledFerrari TF
Ferrari Mondial
Production1953–1957
Body and chassis
Class World Sportscar Championship
Layout Front mid-engine, rear-wheel-drive
Powertrain
Engine Lampredi I4
Dimensions
Wheelbase 2,250 mm (88.6 in)
Chronology
Predecessor Ferrari 250 MM
Successor Ferrari 250 Testa Rossa

The Ferrari Monza is one of a series of cars built by Ferrari. In the early 1950s, Ferrari shifted from using the compact Gioacchino Colombo-designed V12 engine in its smallest class of sports racers to a line of four-cylinder engines designed by Aurelio Lampredi. Inspired by the success of the light and reliable 2.5 L 553 F1 car, the four-cylinder sports racers competed successfully through the late 1950s, culminating with the famed 500 Mondial and 750 Monza.

Contents

V12 models used downdraft carburettors located centrally in the "valley" of the engine, while the inline-engined fours used side-draft units and thus did not need the hood scoops.

Almost all Monzas had 2,250 mm (88.6 in) of wheelbase, except for 250 and 860 Monza.

1953

1953 was a breakout year for Ferrari, beginning with the new World Sportscar Championship series. The company augmented their traditional V12-powered 250 MM with the new 340 MM and 375 MM and introduced the new four-cylinder 625 TF and 735 S models. With this profusion of cars, Ferrari was able to sweep the first running of the sportscar championship.

625 TF

Ferrari 625 TF
FERRARI 625 TF - Circuit de Dijon Prenois 02.jpg
Overview
Production1953
Body and chassis
Class WSC racer
Powertrain
Engine 2.5 L (2498.32 cc) Lampredi I4 [1]
Dimensions
Curb weight 730 kg (1610 lb)
Chronology
Predecessor Ferrari 250 MM
Successor Ferrari 500 Mondial

The first four-cylinder closed-wheel sports racer from Ferrari was the 625 TF of 1953. Resembling the Vignale-designed 250 MM spyder in most respects, the 625 TF used a 2.5 L (2498 cc/152 in³) straight-4 lifted from the 625 F1 car instead of the 250's 3.0 L V12. It was a small car, with the same 2,250 mm (89 in) wheelbase as the 250 but even lighter at 730 kg (1,610 lb). The engine produced 220 hp (164 kW) at 7,000 rpm and could push the little roadster to over 240 km/h (150 mph).

The lightweight car debuted at the hands of Mike Hawthorn at Monza on June 29, 1953. Although it could not keep up on the long straights at that track, Hawthorn still brought the car to fourth place at its debut.

A single closed 625 TF berlinetta, one of the last Ferraris designed and built by Vignale, was created in the Spring of 1953. Per Giulio Vignale, it was destroyed in a fire. There is speculation it was rebodied as a Spyder by Scaglietti in 1954 but this is unconfirmed. [2]

735 S

Ferrari 735 S
1953-06-29 Monza Ferrari 735 0428M.jpg
Overview
Production1953
Body and chassis
Class WSC racer
Powertrain
Engine 2.9 L (2941.66 cc) Lampredi I4 [3]
Chronology
Predecessor Ferrari 250 MM
Successor Ferrari 750 Monza

The same day that the 625 TF debuted, another car was fielded for Alberto Ascari. Sporting an enlarged 2.9 L (2941.66 cc/179 in³) [3] engine, Ascari's 735 S was more capable at Monza, leading the race until he collided with a 250 MM. The 735 S was a barchetta bodied by Carrozzeria Autodromo with recessed headlights, a drooping grille, and fender vents. Pinin Farina and Scaglietti also bodied an example each.

500 Mondial

Ferrari 500 Mondial
Ferrari 500 Mondial at 2014 Mille Miglia.jpg
Overview
Production1953–1955
Body and chassis
Class WSC racer
Powertrain
Engine 2.0 L (1984.86 cc) Lampredi I4 [4]
Dimensions
Curb weight 720 kg (1,590 lb)
Chronology
Predecessor Ferrari 625 TF
Successor Ferrari 500 TR

The early experiments with Lampredi's four-cylinder engine led to the creation of the famed 500 Mondial. Named to mark the world ("Mondial") championships won by Alberto Ascari, the 500 Mondial featured a 2.0 L version of Lampredi's four-cylinder engine in a small and light body with an advanced suspension. The car debuted on December 20, 1953 at the 12 Hours of Casablanca driven by Ascari and Luigi Villoresi, placing second to a 375 MM. In 1954 four 500 Mondials were entered in Mille Miglia race, with best result being second overall after Lancia D24. [5] The Mondial remained competitive through the end of the decade, including an entry in the 1957 Mille Miglia, and was raced as late as 1962, when Javier Valesquez entered chassis 0448MD in the 1962 Carrera Presidential race in Mexico City. [6]

The 500 Mondial's 2.0 L (1984.86 cc/121 in³) engine was taken from the 500 F2 which won the world championship but was detuned to produce 170 hp (127 kW). [4] It was extremely light at 720 kg (1,590 lb). and handled well with a modern de Dion tube rear suspension.

The first 500 Mondials were spiders bodied by Pinin Farina, but Carrozzeria Scaglietti later created a series of barchettas. Two berlinettas were also built by Pinin Farina. 29 were built in total. Of the 13 Pininfarina spiders built, 5 were the earlier Series I version with covered headlights. [6] [7]

The car won the Gran Turismo Trophy at the 2012 Pebble Beach Concours d'Elegance. [8]

1954–1955

The 1954 and 1955 seasons were the heyday of the four-cylinder Ferrari sports racer. The company hit its stride, earning the World Sportscar Championship in 1954 and contending in 1955 despite the legendary Mercedes-Benz team. The Ferrari sports car lineup at the beginning of 1954 was made up of the 2.0 L 500 Mondial and 3.0 L 750 Monza. The team replaced the Mondial with the 500 TR later that year, and feverishly worked to hold off Mercedes-Benz, developing the larger 857 S and six-cylinder 118 LM and 121 LM. The planned V12 sports racer family, including the 250 Monza of 1954 and planned 410 S of 1955, were less notable.

750 Monza

Ferrari 750 Monza
Ferrari 750 Monza Scaglietti Spyder - front right (Crown Casino, Melbourne, Australia, 3 March 2007).JPG
Overview
Production1954
Body and chassis
Class WSC racer
Powertrain
Engine 3.0 L (2999.62 cc) [9] Lampredi I4
Dimensions
Curb weight 760 kg
Chronology
Predecessor Ferrari 735 S
Successor Ferrari 857 S

1954 saw the introduction of a new four-cylinder sports racer, the 750 Monza. Sporting a three-litre version of the 500 Mondial's engine, the Monza was much more powerful, with 260 PS (191 kW) available, but barely heavier at 760 kg (1,675 lb). The new-style body was penned by Pinin Farina and presaged the droop-nose look of the famed 250 GTO, but it was Scaglietti's 750 Monza, with its faired-in headrest suggesting the flowing Testa Rossa that drew attention. [10]

Alberto Ascari was killed in the car during an impromptu testing session at Monza in 1955.

Mike Hawthorn and Umberto Maglioli piloted their 750 Monza to victory at Monza

on its very first race, giving the car its name. Although they were strong on the track, the Monza was unable to hold off the Mercedes-Benz 300 SLR in 1955, allowing the Germans to seize the sports car championship that Ferrari claimed in 1954.

857 S

Ferrari 857 S
Retromobile 2011 - Ferrari 857 S - 1955 - 001.jpg
Overview
Production1955
Body and chassis
Class WSC racer
Powertrain
Engine 3.4 L (3431.93 cc) Lampredi I4
Chronology
Predecessor Ferrari 750 Monza
Successor Ferrari 860 Monza

The short-lived 857 S of 1955 was an attempt to hold off the strong Mercedes-Benz team, something the 750 Monza and the 376 S/735 LM had been unable to do. An existing 750 Monza chassis received an enlarged version of Lampredi's four, now displacing 3.4 litres (3,431.93 cc; 209.4 cu in) [11] and producing 280 hp (206 kW). The car was not competitive with the German team at the 1955 Tourist Trophy, so Lampredi went back to the drawing board for the next season. At the 1955 Targa Florio, the 857 S came third overall, driven by Castellotti. [12] A year later, at the 1956 1000 km Buenos Aires, Olivier Gendebien and Phil Hill scored second place.

1956

With Mercedes-Benz pulling out of international sports car racing, the 860 Monza and new 290 MM showed well throughout 1956, bringing the sports car world championship home to Modena again. This despite the fact that Jaguar's new D-Type took the crown at the newly restricted Le Mans and Maserati's 300 S took the 1000km Nürburgring race.

500 TR

Ferrari 500 TR
Ferrari 500 TR.JPG
Overview
Production1956
16 produced
Body and chassis
Class WSC racer
Powertrain
Engine 2.0 L (1984.86 cc) [13] Lampredi I4
Dimensions
Curb weight 680 kg (1,500 lb)
Chronology
Predecessor Ferrari 500 Mondial
Successor Ferrari 860 Monza

As the 750 was introduced in 1954, the smaller 500 Mondial was replaced by another two-liter car, the 500 TR. The first car to bear the famed Testa Rossa name, the 500 TR differed from the Mondial in many details. Among the most important was a coil spring suspension, a radical departure for Ferrari, as well as a synchronized transmission with a two-disc clutch. The 500 TR continued its predecessors tradition of light weight, coming in at just 680 kg (1,500 lb), and this combined with the engine's 180 hp (132 kW) [13] to bring stirring performance to the car. Scaglietti bodied all of the 500 TRs. [14]

860 Monza

Ferrari 860 Monza
Ferrari 860 Monza Spider Scaglietti (Sinsheim).JPG
Overview
Production1956
3 produced
Body and chassis
Class WSC racer
Powertrain
Engine 3.4 L (3431.93 cc) [15] Lampredi I4
Dimensions
Wheelbase 2,350 mm (92.5 in)
Chronology
Predecessor Ferrari 857 S
Successor Ferrari 290 MM

Although little changed on paper from the 857 S, the 1956 860 Monza was much more competitive in international sports car racing. The engine was reworked with 102 mm (4 in) by 105 mm (4.1 in) dimensions for a total of 3.4 L (3431.93 cc/209 in³), [15] though power output remained at 280 PS (206 kW). The wheelbase was lengthened by 100 mm (3.9 in) to 2,350 mm (93 in), but a new front coil spring suspension, as on the 500 TR, allowed the 100 kg (220 lb) heavier car to handle well. In 1956 12 Hours of Sebring Fangio and Castellotti team won the race with Musso and Schell scoring 2nd place. [16] Also in 1956, during Mille Miglia two 860 Monzas placed second and third overall. [17]

An improved Ferrari 860 Monza, driven by Peter Collins and Louis Klemantaski to 2nd place overall at 1956 Mille Miglia 1956-04-29 Mille Miglia Ferrari 860 Monza 0628 Collins Klemantaski.jpg
An improved Ferrari 860 Monza, driven by Peter Collins and Louis Klemantaski to 2nd place overall at 1956 Mille Miglia

625 LM

Ferrari 625 LM
Ferrari 625 LM.jpg
Overview
Production1956
4 produced
Body and chassis
Class Le Mans prototype
Powertrain
Engine 2.5 L (2498.32 cc) Lampredi I4
Chronology
Predecessor Ferrari 735 LM
Successor Ferrari 335 S
Ferrari 250 Testa Rossa

After the 1955 Le Mans disaster, the ACO reduced engine size and restricted prototype entries for the 1956 24 Hours of Le Mans to control the speed and danger of the race. Ferrari could not enter its 1956 3.4 L 860 Monza and 3.5 L 290 MM in race, so it instead modified three 500 TR barchettas to take the larger 2.5 L engine, and entered them as the 625 LM. The engine was only slightly modified from the 625 F1 with compression reduced to 9:1 and two Weber 42DCO/A carburettors used. [18] Of the three, only the car of Gendebien/Trintignant finished, placing third to the privately entered Ecurie Ecosse Jaguar D-Type and a factory entered Aston Martin DB3S (both these models had been produced and sold in sufficient numbers to be classed as 'production' sports cars and therefore not subject to the 2.5 litre restriction on 'prototypes'). Out of fours cars, three were bodied by Carrozzeria Touring, and the design aped the 750 Monza including the faired-in headrest. [19]

1957

Ferrari handed off the four-cylinder sports racer line to customers at the end of 1956, choosing to equip Scuderia Ferrari with the Jano V12-powered 315 S and 335 S cars as well as the Colombo V12-powered 250 Testa Rossa.

500 TRC

Ferrari 500 TRC
Kristianstad GP13 - Ferrari 500 TRC.jpg
Overview
Production1957
19 produced
Body and chassis
Class WSC racer
Powertrain
Engine 2.0 L (1984.86 cc) [20] Lampredi I4
Dimensions
Curb weight 680 kg (1,500 lb)
Chronology
Predecessor Ferrari 500 TR

The 1956/7 500 TRC was an altered version of the successful 500 TR of the previous year. The most significant changes were made to comply with Annex C of the International Racing Code, resulting in the "C" added to the model's name. [21] In order to follow these regulations, Ferrari widened the cockpit, added a passenger side door, fitted a full width windscreen with wipers, installed a 120 liters (32 U.S. gal) fuel tank and even added a stowable convertible top. The Scaglietti-built body, while similar to that of the 500 TR, had a lower hood and slightly reshaped wheel arches and fenders. Another change from the 500 TR was the longer 2,350 mm (93 in) wheelbase, derived from the 860 Monza. Suspension featured coil springs all around with a live rear axle. Like the 500 TR, the car weighed only 680 kg (1,500 lb), and produced 180 hp (132 kW). [21] [20] [22] Ferrari manufactured a total of 19 500 TRC chassis between 1956 and 1957. This model was the last 4-cylinder racing car built by Ferrari. [22]

Even though this model was never raced by Scuderia Ferrari as a works car, 500 TRCs were successfully raced by independent teams and drivers. At the 1957 24 Hours of Le Mans, a 500 TRC finished 7th overall, claiming victory in the 2,000 cc class, . [23] Another 500 TRC claimed a 2,000 cc class win at the 1958 Targa Florio. [20] [24]

Two 500 TRC chassis were upgraded by factory to 2.5-litre specification, creating the very rare 625 TRC model. They were both owned and raced by John von Neumann, owner of the Ferrari Representatives of California dealership. [25] S/n 0672MDTR was further fitted with the 3.4 L 860 Monza engine, just to be refitted once more in 1958, this time with a 3.0 L 250 Testa Rossa unit. [26] S/n 0680MDTR was sold on May 12, 2012 at RM Sotheby's auction in Monaco for €5 million. [27]

Ferrari 625/250 TRC Ferrari 625-250 TRC 1957.jpg
Ferrari 625/250 TRC

Monza SP1/SP2

Ferrari Monza SP1 at 2018 Paris Motor Show Ferrari Monza SP1, Paris Motor Show 2018, IMG 0362.jpg
Ferrari Monza SP1 at 2018 Paris Motor Show

The Monza SP1 and SP2 are limited production sports cars inspired by the previous Monza models, such as 750 Monza and 860 Monza. It was introduced in 2018. The cars mark the start of a new lineage of models called the "Icona" series, a program aimed at creating special cars inspired by classic Ferrari models, all to be produced in limited series. The SP1 is a single seater, while the SP2 features two seats. Fewer than 500 are expected to be produced. [28]

See also

Related Research Articles

<span class="mw-page-title-main">Ferrari Lampredi engine</span> Motor vehicle engine

The Ferrari Lampredi engine was a naturally aspirated all aluminum 60° V12 engine produced between 1950 and 1959. Inline-4 and Inline-6 variants for racing were derived from it.

<span class="mw-page-title-main">Carrozzeria Scaglietti</span>

Carrozzeria Scaglietti was an Italian automobile design and coachbuilding company active in the 1950s. It was founded by Sergio Scaglietti in 1951 as an automobile repair concern, but was located across the road from Ferrari in Maranello outside Modena, Italy.

<span class="mw-page-title-main">Ferrari America</span> Motor vehicle

Ferrari America is a series of top-end Ferrari models built in the 1950s and 1960s. They were large grand touring cars with the largest V12 engines and often had custom bodywork. All America models used a live axle in the rear, were front-engined, and had worm and sector steering.

<span class="mw-page-title-main">Ferrari 250</span> Series of sports cars and grand tourers built by Ferrari from 1952 to 1964

The Ferrari 250 is a series of sports cars and grand tourers built by Ferrari from 1952 to 1964. The company's most successful early line, the 250 series includes many variants designed for road use or sports car racing. 250 series cars are characterized by their use of a 3.0 L (2,953 cc) Colombo V12 engine designed by Gioacchino Colombo. They were replaced by the 275 and 330 series cars.

<span class="mw-page-title-main">Ferrari 250 Testa Rossa</span> Racing sports car built by Ferrari from 1957 to 1961

The Ferrari250 Testa Rossa, or 250 TR, is a racing sports car built by Ferrari from 1957 to 1961. It was introduced at the end of the 1957 racing season in response to rule changes that enforced a maximum engine displacement of 3 litres for the 24 Hours of Le Mans and World Sports Car Championship races. The 250 TR was closely related to earlier Ferrari sports cars, sharing many key components with other 250 models and the 500 TR.

<span class="mw-page-title-main">Ferrari 375 F1</span> 1950 Formula One racing car by Ferrari

After finding only modest success with the supercharged 125 F1 car in Formula One, Ferrari decided to switch for 1950 to the naturally aspirated 4.5-litre formula for the series. Calling in Aurelio Lampredi to replace Gioacchino Colombo as technical director, Enzo Ferrari directed that the company work in stages to grow and develop an entirely new large-displacement V12 engine for racing.

<span class="mw-page-title-main">Ferrari 250 S</span> Motor vehicle

The Ferrari 250 S was a sports racing car produced by Ferrari in 1952. It was the first in the long lineage of Ferrari 250 road and race cars powered by a ubiquitous 3.0-litre Colombo V12 engine. In 1952 the 250 S won the Mille Miglia and 12 Hours of Pescara. At the Le Mans, the same year, it clocked the fastest race lap time. Only a single example was produced.

<span class="mw-page-title-main">Ferrari 375 Plus</span> Motor vehicle

The Ferrari 375 Plus was a sports racing car produced by Ferrari in 1954. The model competed internationally, winning many major races, including 24 Hours of Le Mans, Carrera Panamericana, 1000km of Buenos Aires, Agadir GP and Silverstone.

<span class="mw-page-title-main">Ferrari 250 Monza</span> Motor vehicle

The Ferrari 250 Monza was a sports racing car produced by Ferrari in 1954. It was a combination of a stretched chassis and body from the line of inline-four-engined racers with an ubiquitous 3.0-litre Colombo V12 engine.

<span class="mw-page-title-main">Ferrari 335 S</span> Motor vehicle

The Ferrari 335 S was a sports racing car produced by Italian manufacturer Ferrari in 1957. The car was a direct response to the Maserati 450S which with its 4.5-litre engine was threatening to overpower the 3.8-litre 315 S and 3.5-litre 290 MM. Four cars were produced in total.

<span class="mw-page-title-main">Ferrari Jano engine</span> Motor vehicle engine

Vittorio Jano designed a new 60° V12 engine for sports car racing for Ferrari. This new engine, introduced in 1956, combined elements of both Colombo and Lampredi engines with new features. Engine architecture was more of Lampredi school but retained smaller Colombo internal measurements. Jano moved to Ferrari along with his designs for the Lancia D50 in 1955 and went on to design not only a new V12 but also a family of the Dino V6 engines soon after. Some of the technical ideas came from the Jano's Lancia V8 DOHC engine, intended for Formula One. This family of engines replaced Lampredi inline-4s known from Ferrari Monza line and went on to win many international races and titles for Ferrari. The design team comprised Jano as well as Vittorio Bellentani, Alberto Massimino, and Andrea Fraschetti.

<span class="mw-page-title-main">Ferrari 410 S</span> Motor vehicle

The Ferrari 410 S was a sports racing car produced by Ferrari in 1955–1956. After the racing successes of 375 Plus, mainly in 1954 Carrera Panamericana, Ferrari decided to prepare another model for this marathon. The 410 S was intended as a long-distance race car originally designed for the 1955 Carrera Panamericana and was the final model of the Lampredi V12 sports car lineage. The next generation of sports racing cars that replaced the 410 S were powered by the new Jano V12 engines.

<span class="mw-page-title-main">Ferrari 275 S</span> Motor vehicle

The Ferrari 275 S was a sports racing car produced by Ferrari in 1950. It was the first Ferrari powered by a new Aurelio Lampredi-designed V12 engine, created as a large displacement alternative to the initial 1,5 L Colombo V12, used in supercharged form in Ferrari 125 F1. Formula One regulations allowed for up to 4.5 L in naturally aspirated form.

<span class="mw-page-title-main">Ferrari 250 MM</span> Motor vehicle

The Ferrari 250 MM was a sports racing car produced by Ferrari in 1953. After the initial racing successes of the 3.0-litre Colombo V12 engine, introduced in the 250 S one-off, Ferrari produced a serial racing model. It is best recognisable for the distinctive closed berlinetta bodywork by Pinin Farina. The "MM" in its name stood for the Mille Miglia race.

<span class="mw-page-title-main">Ferrari 376 S</span> Motor vehicle

The Ferrari 376 S was a sports racing car produced by Ferrari in 1955. It was the first raced Ferrari powered by a new Aurelio Lampredi-designed inline-6 engine, created as a larger alternative to the inline-4 series of engines used in the Ferrari Monza race cars. The intention behind the development of this model was the 1955 Mille Miglia race. It was yet another attempt by Ferrari to match the new Mercedes-Benz 300 SLR in competition. All of the created cars were further converted into a bigger capacity models.

<span class="mw-page-title-main">Ferrari 735 LM</span> Motor vehicle

The Ferrari 735 LM was a sports racing car produced by Ferrari in 1955. It was the second raced Ferrari, powered by an Aurelio Lampredi-designed inline-6 engine, created as a larger displacement evolution to the engines used in the Ferrari Monza race cars.

<span class="mw-page-title-main">Ferrari 290 S</span> 1957 sports car

The Ferrari 290 S was a sports racing car produced by Ferrari in 1957. It was a development of an earlier 290 MM race car that won the 1956 Mille Miglia. The 290 S was the first sports car manufactured by Ferrari to be powered by a DOHC V12 engine. Its career was very short but it served as an important milestone in the Jano V12-powered lineage.

<span class="mw-page-title-main">Ferrari 250 GT Coupé</span> 1954–1960 grand touring car produced by Ferrari

The Ferrari 250 GT Coupé represented a series of road-going, grand touring cars produced by Ferrari between 1954 and 1960. Presented at the 1954 Paris Motor Show, the 250 Europa GT was the first in the GT-lineage. The design by Pinin Farina was seen as a more civilised version of their sporty Berlinetta 250 MM. Series built cars were an answer to the wealthy clientele demands of a sporty and luxurious Ferrari Gran Turismo, that is also easier to use daily.

References

  1. "625 TF specifications". Ferrari GT - en-EN. Archived from the original on 2015-12-22. Retrieved 2015-12-16.
  2. "625 TF 0302TF 53 Ferrari 625 TF Vignale Berlinetta, RHD".
  3. 1 2 "735 S specifications". Ferrari GT - en-EN. Archived from the original on 2015-12-22. Retrieved 2015-12-16.
  4. 1 2 "Ferrari 500 Mondial (1953)". ferrari.com. Retrieved 20 October 2021.
  5. "Mille Miglia 1954 Race Results" . Retrieved 22 May 2019.
  6. 1 2 Aucock, Richard (30 May 2019). "Rare 500 Mondial Spider is perfection". magazine.ferrari.com. Retrieved 2020-04-30.
  7. "Ferrari 500 Mondial - Register". barchetta.cc. Retrieved 28 September 2019.
  8. "1954 Ferrari 500 Mondial Pinin Farina Coupe Wins Gran Turismo Trophy at Pebble Beach 2012". gtplanet.net. 20 August 2012. Archived from the original on 26 April 2018. Retrieved 26 April 2018.
  9. "Ferrari 750 Monza". Archived from the original on 2015-12-22. Retrieved 2015-12-14.
  10. "Specifications of 50 famous racing engines up to 1994 - Page 7 - F1technical.net".
  11. "Ferrari 857 S". Archived from the original on 2015-12-22. Retrieved 2015-12-14.
  12. "857 Sport s/n 0570M". barchetta.cc. Retrieved 18 September 2019.
  13. 1 2 "Ferrari 500 TR". Ferrari GT - en-EN. Archived from the original on 2015-12-22. Retrieved 2015-12-14.
  14. "Ferrari 500 TR - Register". barchetta.cc. Retrieved 22 September 2019.
  15. 1 2 "Ferrari 860 Monza". Ferrari GT - en-EN. Archived from the original on 2015-11-08. Retrieved 2015-12-14.
  16. "1956 Sebring". barchetta.cc. Retrieved 16 October 2021.
  17. "Mille Miglia 1956 Race Results" . Retrieved 22 May 2019.
  18. "Ferrari 625 LM". auto.ferrari.com. Retrieved 18 September 2019.
  19. "Ferrari 625 LM - Register". barchetta.cc. Retrieved 22 September 2019.
  20. 1 2 3 "Ferrari 500 TRC". Ferrari GT - en-EN. Archived from the original on 2015-12-22. Retrieved 2015-12-14.
  21. 1 2 Prunet, Antoine (1983). Ferrari : sport racing and prototypes competition cars. New York: Norton. pp. 144–146. ISBN   0-393-01799-0. OCLC   10382200.
  22. 1 2 Boe, Alan (December 2003). "Ferrari's Final Four". Cavallino. 138: 26–32.
  23. Thomson, Laura (26 September 2019). "This four-cylinder Ferrari 500 TRC won at Le Mans in 1957". www.goodwood.com. Retrieved 2019-12-24.
  24. "500TRC s/n 0682MDTR". www.barchetta.cc. Retrieved 2019-12-24.
  25. "625 TRC s/n 0680MDTR". barchetta.cc. Retrieved 18 September 2019.
  26. "500 TRC s/n 0672MDTR". barchetta.cc. Retrieved 18 September 2019.
  27. "1957 Ferrari 625 TRC Spider". rmsothebys.com. Retrieved 18 September 2019.
  28. Gastelu, Gary (2018-09-18). "Single-seat Ferrari Monza SP1 will cost seven figures". Fox News. Retrieved 2018-09-19.

Bibliography