Category | Sports prototype | ||||||||
---|---|---|---|---|---|---|---|---|---|
Constructor | Ferrari | ||||||||
Predecessor | Ferrari 1512 | ||||||||
Successor | Ferrari 312PB | ||||||||
Technical specifications [1] [2] | |||||||||
Chassis | Tubular steel | ||||||||
Suspension (front) | Independent, unequal-length wishbones, coil springs, telescopic shock absorbers, anti-roll bar | ||||||||
Suspension (rear) | Independent, unequal-length wishbones, coil springs, telescopic shock absorbers, anti-roll bar | ||||||||
Length | 3,800 mm (149.6 in) | ||||||||
Width | 1,980 mm (78.0 in) | ||||||||
Axle track | 1,377 mm (54.2 in) front 1,412 mm (55.6 in) rear | ||||||||
Wheelbase | 2,340 mm (92.1 in) | ||||||||
Engine | Tipo 232 1,991 cc (121.5 cu in) flat-12, naturally-aspirated, mid-mounted | ||||||||
Transmission | Ferrari 5-speed manual | ||||||||
Weight | 500–530 kg (1,102.3–1,168.4 lb) | ||||||||
Tyres | 5.00-10.00-13 front 6.00-14.00-13 rear | ||||||||
Competition history | |||||||||
Notable entrants | Scuderia Ferrari | ||||||||
Notable drivers | Peter Schetty Edoardo Lualdi-Gabardi | ||||||||
Debut | Ampus hill climb, March 30, 1969 | ||||||||
|
The Ferrari 212 E Montagna was a one-off spyder sports racing car produced by Ferrari in 1968. The car was built on a Dino 206 S chassis and used a unique 2-litre, 48-valve, flat-12 engine, a development of the 1512 1.5-litre Formula One engine. Driven by Peter Schetty, the car dominated the 1969 European Hill Climb Championship, placing first in every race it entered and setting many course records. [1]
In 1964, Ferrari developed the Tipo 207 1.5- litre flat-twelve engine for its 1512 F1 car. This basic design by Mauro Forghieri was modified by Stefano Jacoponi to create the Tipo 232 2-litre engine used in the 212 E. Overall capacity of this engine was 1990.08cc, bore and stroke was 65mm X 50mm and the compression ratio was 11:1. Initially, the engine produced approximately 280-290 bhp at 11,500 rpm. [1] [3] [4] Two units of the Tipo 232 motor were produced, with the first scrapped following initial development and dyno testing. The second Tipo 232 engine was installed in the 1967 Sport 2000, a testbed car based on a 206 S Dino chassis (number 020). This car was tested in late 1967 by Chris Amon at Modena [5] and announced as a contender in the 1968 European Hill Climb Championship, but did not compete that season. Instead, this chassis was subsequently used (with a different Ferrari V12 drivetrain) in the Pininfarina 250 P5 show car, displayed at the Geneva, Los Angeles and Turin auto shows in 1968. [6] [7]
Dino chassis 020 and the Tipo 232 motor were reunited in late 1968, when Scuderia Ferrari decided to develop the Sport 2000 into the 212 E, under the supervision of Forghieri. The car was not considered reliable enough to compete in endurance events and was instead optimized to race the short, winding courses of the European Hill Climb Championship. Peter Schetty was chosen to test and race the 212 E. Schetty was an experienced hill climb racer and test driver who would later become Scuderia Ferrari team manager. Following testing at Modena and Vallelunga, the 212 E was modified from its Sport 2000 specification. Headlights were removed, fuel capacity was reduced and the car's plastic body was modified to optimize aerodynamics and weight for hillclimbs. Engine output and cooling systems were also improved. Power output at the start of the 1969 racing season varied from 300 to 320 bhp depending on tune. [1] The 212 E was also equipped with inboard rear disc brakes, in order to reduce unsprung mass. Overall weight was 500 kg. [4] As the 212 E, the car was given serial number 0862. [5]
The numerical designation "212" refers to the 2-liter 12-cylinder engine, with the "E Montagna" designating its role as a racer in the "Europeo Montagna" Championship. The name is similar, but not a direct reference, to that of the 1950s Ferrari 212 Export. [5] [8]
Scuderia Ferrari entered the 212 E in the 1969 European Hillclimb Championship with Peter Schetty driving, supported by Ferrari engineer Gianni Marelli and two mechanics. [9] Racing in the sport class, the car dominated the competition, winning every race in which it was entered. [1] Minor modifications of gearing, aerodynamics and suspension setup were made during the season to adapt the car for each course. [5] After seven victories, including six absolute course records, the team withdrew from the final race of the season as they had already clinched the championship. The 212 E's dominance in 1969 was ensured by the lack of any viable rival, with the nearest competition the Abarth 2000 driven by Arturo Merzario with 50 fewer horsepower. However, the car's overall speed was undeniable, evidenced by the course record Schetty set at Côte de Cesana-Sestrière, which remained unbroken for 13 years. [1] [7]
The car did not compete in 1970, although there was tremendous interest during this time from various drivers who wished to purchase the car from the factory. Ferrari eventually sold the car in late 1970 to Edoardo Lualdi-Gabardi, who commissioned the factory to fit a new body designed by Piero Lardi Ferrari. The original 212 E bodywork was subsequently fitted to a Dino 206 S, with which it still remains. [10] Lualdi-Gabardi successfully raced the 212 E in hill climbs during the 1971 season. [5] [6] [11]
The 212 E Montagna is historically significant due to its competition success and unique engine, as well as the chassis' use in the Pininfarina 250 P5 show car. Forghieri considered the 212 E and its Tipo 232 engine as a test platform and important developmental step towards the 1970s 312B F1 cars and 312PB sports racers, which used a newly designed Tipo 001 3.0-litre flat-12 engine. [5] [8]
The 212 E Montagna sold to a private buyer at RM's 2006 Scottsdale auction for $1,650,000. [7] [11]
The Ferrari Berlinetta Boxer (BB) is series of sports cars produced by Ferrari in Italy between 1973 and 1984. The BB was designed by Leonardo Fioravanti at Pininfarina. The first BB model, the 365 GT4 BB, replaced the front engined Daytona and was the first in a series of road-going Ferraris equipped with a mid-mounted flat-twelve engine. It was also the first mid-engined road-car to bear the Ferrari name and the Cavallino Rampante logo. The 365 GT4 BB was succeeded in 1976 by the BB 512, equipped with a larger displacement engine, then by the fuel-injected BB 512i in 1981. The series was discontinued in 1984 when the BB 512i was replaced by the Testarossa, which used a revised version of the flat-twelve engine.
The Ferrari 250 GTO is a GT car produced by Ferrari from 1962 to 1964 for homologation into the FIA's Group 3 Grand Touring Car category. It was powered by Ferrari's Tipo 168/62 Colombo V12 engine.
The Ferrari 275 is a series of front-engined V12-powered grand touring automobiles with two-seater coupé and spider bodies produced by Ferrari between 1964 and 1968. The first 275 series cars were powered by a 3.3 L (3286 cc) overhead camshaft Colombo 60° V12 engine producing 260–320 hp (190–240 kW). An updated 275 GTB/4 was introduced in 1966, with a revised four overhead camshaft engine producing 300 hp (220 kW). The 275 series were the first road-going Ferraris equipped with a transaxle and independent rear suspension.
The Ferrari 550 Maranello is a front-engine V12 2-seat grand tourer built by Ferrari from 1996 to 2001. The 550 Maranello marked Ferrari's return to a front-engine, rear-wheel drive layout for its 2-seater 12-cylinder model, 23 years after the 365 GTB/4 Daytona had been replaced by the mid-engined Berlinetta Boxer.
The Ferrari P was a series of Italian sports prototype racing cars produced by Ferrari during the 1960s and early 1970s.
The Alfa Romeo 8C was originally a range of Alfa Romeo road, race and sports cars of the 1930s. In 2004 Alfa Romeo revived the 8C name for a V8-engined concept car which made it into production for 2007, the 8C Competizione.
The Ferrari250 Testa Rossa, or 250 TR, is a racing sports car built by Ferrari from 1957 to 1961. It was introduced at the end of the 1957 racing season in response to rule changes that enforced a maximum engine displacement of 3 litres for the 24 Hours of Le Mans and World Sports Car Championship races. The 250 TR was closely related to earlier Ferrari sports cars, sharing many key components with other 250 models and the 500 TR.
Ferrari is an Italian company which has produced sports cars since 1947, but traces its roots back to 1929 when Enzo Ferrari formed the Scuderia Ferrari racing team.
Ferrari 512 S is the designation for 25 sports cars built in 1969–70, with five-litre 12-cylinder ("512") engines, related to the Ferrari P sports prototypes. The V12-powered cars were entered in the 1970 International Championship for Makes by the factory Scuderia Ferrari and private teams. Later that year, modified versions resembling their main competitor, the Porsche 917, were called Ferrari 512 M. In the 1971 International Championship for Makes, the factory focused on the new Ferrari 312 PB and abandoned the 512 which was only entered by privateers. From 1972 onwards, the 512 was withdrawn from the world championship following a change in the regulations, and some 512s in private hands were entered in CanAm and Interserie races.
The Porsche 909 "Bergspyder" was a spyder sports car designed and built by Porsche in 1968. Its purpose was to compete in hillclimbing competitions, specifically the EHCC Sports Car class of the European Hillclimb Championship. It was a short-lived model, but its basic structure, technical innovations, and overall design became the basis for the successful 908/3.
The Ferrari 312T was a Ferrari Formula One car design, based on the 312B3 from 1974. In various versions, it was used from 1975 until 1980. It was designed by Mauro Forghieri for the 1975 season, and was an uncomplicated and clean design that responded well to mechanical upgrades.
Mauro Forghieri was an Italian mechanical engineer, best known for his work as a Formula One racing car designer with Scuderia Ferrari during the 1960s and 1970s. He is credited with introducing the first designed rear wings to Formula One at the 1968 Belgian Grand Prix, and designing the first transversal automatic gear, also known as T gear.
The Ferrari 225 S was a sports racing car produced by Ferrari in 1952. It was an evolution over the preceding Ferrari 212 Export with important engine upgrades that greatly improved power output. The model was extensively used in competition, winning many international races. The most important include 1952 Monaco Grand Prix for sports cars, Portuguese Grand Prix, Coppa d'Oro di Sicilia, Coppa della Toscana, Coppa d'Oro delle Dolomiti and many others. It was the final Colombo V12 engine iteration before the 250-family stretched it to 3.0-litres capacity.
The Ferrari 312B is a Formula One racing car designed and built by Scuderia Ferrari. It was the successor to the Ferrari 312 and was used from 1970 until early 1975. The original 312B was developed into the 312B2 and 312B3.
The Ferrari 158 was a Formula One racing car made by Ferrari in 1964 as a successor to the V6-powered Ferrari 156 F1.
The Ferrari 250 Monza was a sports racing car produced by Ferrari in 1954. It was a combination of a stretched chassis and body from the line of inline-four-engined racers with an ubiquitous 3.0-litre Colombo V12 engine.
The Ferrari flat-12 engine family is a series of flat-12 DOHC petrol engines produced by Ferrari from 1964 to 1996. The first racing Ferrari flat-12, the Mauro Forghieri-designed Tipo 207, was introduced in the Ferrari 1512 F1 car in 1964. Later flat-12 racing engines were used in Ferrari Formula One and sports racing cars from 1968 until 1980, including the 212 E Montagna, 312 B series, 312 PB and 312 T series. The roadgoing flat-12 engines were introduced with the 365 GT4 BB and were produced in various versions until the end of F512M production in 1996.
The Ferrari 330 TRI/LM Spyder is a unique racing sports car purpose-built in 1962 by Ferrari to achieve victory at the 24 Hours of Le Mans. It was the last Ferrari racing sports car with a front-mounted engine and the last of a series of Ferrari race cars known as the Testa Rossas. The "I" in its designation indicates that the car has an independent rear suspension.
The Dino 206 S is a sports prototype produced by Ferrari in 1966–1967 under the Dino marque. Ferrari intended to produce at least fifty examples for homologation by the CSI in the Sport 2.0 L Group 4 category. As only 18 were made, the car had to compete in the Prototype 2.0-litre class instead. In spite of this handicap the Dino 206 S took many class wins. The 206 S was the last of the Dino sports racing cars and simultaneously the most produced.
The Ferrari SP was a series of Italian sports prototype racing cars produced by Ferrari during the early 1960s. All featured a rear mid-engine layout, a first for a Ferrari sports car. Major racing accolades include the 1962 European Hill Climb Championship, two overall Targa Florio victories, in 1961 and 1962, and "1962 Coupe des Sports" title.