Ferrari 250 S | |
---|---|
Overview | |
Manufacturer | Ferrari |
Also called | Ferrari 250 Sport |
Production | 1952 1 produced [1] |
Designer | Giovanni Michelotti at Vignale |
Body and chassis | |
Body style | Berlinetta |
Layout | Front mid-engine, rear-wheel-drive |
Related | Ferrari 225 S |
Powertrain | |
Engine | 3.0 L (2953.21 cc) Colombo V12 |
Power output | 230 PS |
Transmission | 5-speed manual |
Dimensions | |
Wheelbase | 2,250 mm (88.6 in) |
Length | 3,800 mm (149.6 in) |
Width | 1,570 mm (61.8 in) |
Height | 1,400 mm (55.1 in) |
Curb weight | 850 kg (1,874 lb) (dry) |
Chronology | |
Predecessor | Ferrari 225 S |
Successor | Ferrari 250 MM |
The Ferrari 250 S was a sports racing car produced by Ferrari in 1952. It was the first in the long lineage of Ferrari 250 road and race cars powered by a ubiquitous 3.0-litre Colombo V12 engine. In 1952 the 250 S won the Mille Miglia and 12 Hours of Pescara. [2] At the Le Mans, the same year, it clocked the fastest race lap time. Only a single example was produced. [1]
The 250 S was created as an evolution over the preceding 225 S model. [3] It shared the same tubular steel chassis of a Tuboscocca type as some of them. The new model retained the same wheelbase and track dimensions. New was the 3.0-litre Colombo V12 engine, developed by Aurelio Lampredi as a chief Ferrari engineer at that time. [4] [5]
The 250 S had a closed berlinetta bodywork designed by Giovanni Michelotti and carried out by Vignale. The style closely resembled the Vignale berlinettas of its predecessors. [6] Front fenders had two portholes in them and the fuel filler cap was on the outside, mounted on the rear window. After the Mile Miglia, bonnet was modified with an air-scoop. Front windshield had three small wipers installed, one of them was on the roof. [7]
A single example was ever produced, s/n 0156ET. "ET" in its suffix represented 'Export-Tuboscocca'. [8] The technical experience and racing capabilities of the 250 S over its career led Ferrari to develop a series produced race car, the 250 MM. [1]
The 250 S' engine was based on the 225 S unit with a bore stretched by 3 mm (0.12 in). Now the internal measurements were at 73 by 58.8 mm (2.9 by 2.3 in) of bore and stroke. The resulting capacity was 2,953.21 cc (3.0 L; 180.2 cu in) and would make the better use out of any 'Sport 3.0' category regulations. [9] The power output benefited from an updated and innovative design of the intake and distribution, already introduced on the 225 S, and was now at 230 PS (169 kW; 227 hp) at 7500 rpm. A compression ratio of 9:1 was higher than before. An SOHC and two valve configuration was standard for Ferrari V12 at that time. Also unchanged were the three Weber 36DCF carburettors. The engine used a single spark plug per cylinder, served by two coils and had a wet sump lubrication. The 250 S still used a five-speed non-synchronised gearbox. Clutch was of a single-plate type. [4]
The chassis of the 250 S was one of the Tuboscocca type that used a smaller diameter steel tubes with additional cross members. The resulting trellis space frame was slightly lighter and more rigid than the standard tubular chassis. [10] It was developed by Gilco, a chassis specialist company established by Gilberto Colombo, and first introduced on a late 212 Export. The front suspension was independent with unequal-length wishbones and transverse leaf springs, aided by hydraulic shock absorbers. At the rear was a live axle with semi-elliptical springs and hydraulic shock absorbers. Brakes were of a drum type. [6]
The 250 S had its first outing at the 1952 Mille Miglia. [6] Entered by Scuderia Ferrari, the car was driven by Giovanni Bracco and Alfonso Rolfo. [11] After a magnificent performance on the Futa and Raticosa passes, they managed to finish first overall, continuing Ferrari's dominance in this road marathon. [4] [12]
Alberto Ascari and Luigi Villoresi were chosen by Scuderia Ferrari to compete in the 1952 24 Hours of Le Mans in the 'Sport 3.0' category. The 250 S, driven by Ascari, recorded the fastest race lap at 4min 40.5sec at an average speed of 173.16 km/h. The car retired with a broken clutch. [12] [13]
At the 1952 Circuito di Senigallia race, the 250 S was entered in the 'Sport +2.0' class. Luigi Villoresi managed a third place overall. Later the same year, at the Coppa Acerbo for sports cars, renamed as the 12 Hours of Pescara, yielded another success for Ferrari. [14] Giovanni Bracco and Paolo Marzotto won the race in the 250 S. The 1952 Carrera Panamericana race was contested by Giovanni Bracco and Gino Bronzoni duo. Their car did not finish the grueling marathon due to clutch and engine problems. Still in 1953, at the Giro di Sicilia, Franco Cornacchia and Gino Bronzoni finished the race prematurely with a broken differential. [12]
In 1953 the 250 S was acquired by an Argentinian Roberto Bonomi. Later the same year, he had entered it in the Targa Florio race. He finished eighth overall and, because of the popular 'S+750' category, eighth in class also. The car competed in the GP Monza, entered by Scuderia Guastalla, finishing at an eighth place. Later, Bonomi entered the Coppa d'Oro delle Dolomiti race but to no avail. The last race of the 250 S was the 1954 Supercortemaggiore at Monza. Entered by Scuderia Guastella and driven by Musitelli and Pezzoli the car did not finish the race. [12]
A grand tourer (GT) is a type of car that is designed for high speed and long-distance driving, due to a combination of performance and luxury attributes. The most common format is a front-engine, rear-wheel-drive two-door coupé with either a two-seat or a 2+2 arrangement. Grand tourers are most often the coupé derivative of luxury saloons or sedans.
Ferrari America is a series of top-end Ferrari models built in the 1950s and 1960s. They were large grand touring cars with the largest V12 engines and often had custom bodywork. All America models used a live axle in the rear, were front-engined, and had worm and sector steering.
The Ferrari 166 S was a sports racing car built by Ferrari between 1948 and 1953, an evolution of its Colombo V12-powered 125 S racer. It was adapted into a sports car for the street in the form of the 166 Inter.
The Ferrari 250 is a series of sports cars and grand tourers built by Ferrari from 1952 to 1964. The company's most successful early line, the 250 series includes many variants designed for road use or sports car racing. 250 series cars are characterized by their use of a 3.0 L (2,953 cc) Colombo V12 engine designed by Gioacchino Colombo. They were replaced by the 275 and 330 series cars.
The Ferrari 212 Inter replaced Ferrari's successful 166 and 195 Inter grand tourers in 1951. Unveiled at the Brussels Motor Show that year, the 212 was an evolution of the 166 — a sports car for the road that could also win international races. In 1951, two 212 Inters, both Vignale coupés, driven by Taruffi/Chinetti and Ascari/Villoresi, scored 1–2 victory at Carrera Panamericana in Mexico.
Maserati A6 were a series of grand tourers, racing sports cars and single seaters made by Maserati of Italy between 1947 and 1956. They were named for Alfieri Maserati and for their straight-six engine.
The Ferrari 340 Mexico was a Ferrari sports racing car which was intended for the 1952 Carrera Panamericana. It used 4.1 L Lampredi V12 engine producing around 280 PS (206 kW) at 6600 rpm, for a maximum speed of 280 km/h. Just 4 were made in 1952, 3 Vignale Berlinettas and 1 Vignale Spyder; all designed by Giovanni Michelotti. Mexico used a 2,600 mm (102.4 in) wheelbase. Chinetti and Lucas finished the race at third place in berlinetta.
The Ferrari 195 S was a sports racing car produced by Ferrari in 1950. It was an improved version of the 166 MM. The 195 S won Mille Miglia, Coppa della Toscana and Giro delle Calabria.
The Ferrari 225 S was a sports racing car produced by Ferrari in 1952. It was an evolution over the preceding Ferrari 212 Export with important engine upgrades that greatly improved power output. The model was extensively used in competition, winning many international races. The most important include 1952 Monaco Grand Prix for sports cars, Portuguese Grand Prix, Coppa d'Oro di Sicilia, Coppa della Toscana, Coppa d'Oro delle Dolomiti and many others. It was the final Colombo V12 engine iteration before the 250-family stretched it to 3.0-litres capacity.
The Ferrari Monza is one of a series of cars built by Ferrari. In the early 1950s, Ferrari shifted from using the compact Gioacchino Colombo-designed V12 engine in its smallest class of sports racers to a line of four-cylinder engines designed by Aurelio Lampredi. Inspired by the success of the light and reliable 2.5 L 553 F1 car, the four-cylinder sports racers competed successfully through the late 1950s, culminating with the famed 500 Mondial and 750 Monza.
The Ferrari 212 Export was a sports racing car produced by Ferrari in 1951–1952. The 212 Exports won Tour de France automobile, Giro di Sicilia, Coppa della Toscana, 10 Hours of Messina and other motor races throughout its career. It was meant to be a sports car available for oversea markets.
The Ferrari 250 Monza was a sports racing car produced by Ferrari in 1954. It was a combination of a stretched chassis and body from the line of inline-four-engined racers with an ubiquitous 3.0-litre Colombo V12 engine.
The Ferrari 375 MM, was a sports racing car produced by Ferrari in 1953 up to 1955 for the road cars. It was named "375" for the unitary displacement of one cylinder in the 4.5 L V12 engine, and the "MM" stood for the Mille Miglia race. In total 26 units were made, including four converted from the 340 MM.
The Ferrari 275 S was a sports racing car produced by Ferrari in 1950. It was the first Ferrari powered by a new Aurelio Lampredi-designed V12 engine, created as a large displacement alternative to the initial 1,5 L Colombo V12, used in supercharged form in Ferrari 125 F1. Formula One regulations allowed for up to 4.5 L in naturally aspirated form.
The Ferrari 250 MM was a sports racing car produced by Ferrari in 1953. After the initial racing successes of the 3.0-litre Colombo V12 engine, introduced in the 250 S one-off, Ferrari produced a serial racing model. It is best recognisable for the distinctive closed berlinetta bodywork by Pinin Farina. The "MM" in its name stood for the Mille Miglia race.
The Ferrari 376 S was a sports racing car produced by Ferrari in 1955. It was the first raced Ferrari powered by a new Aurelio Lampredi-designed inline-6 engine, created as a larger alternative to the inline-4 series of engines used in the Ferrari Monza race cars. The intention behind the development of this model was the 1955 Mille Miglia race. It was yet another attempt by Ferrari to match the new Mercedes-Benz 300 SLR in competition. All of the created cars were further converted into a bigger capacity models.
The Ferrari 735 LM was a sports racing car produced by Ferrari in 1955. It was the second raced Ferrari, powered by an Aurelio Lampredi-designed inline-6 engine, created as a larger displacement evolution to the engines used in the Ferrari Monza race cars.
The Ferrari 290 S was a sports racing car produced by Ferrari in 1957. It was a development of an earlier 290 MM race car that won the 1956 Mille Miglia. The 290 S was the first sports car manufactured by Ferrari to be powered by a DOHC V12 engine. Its career was very short but it served as an important milestone in the Jano V12-powered lineage.
Coppa della Toscana was a sports car race held on the roads of Tuscany, through Livorno and Florence, between 1949 and 1954.
The OSCA MT4, also spelled the O.S.C.A. MT4, or the Osca MT4, is an Italian sports car prototype, designed, developed, and made by Officine Specializzata Costruzioni Automobili, between 1948 and 1956, but was raced and used in active competition until 1966.