Ferrari 365 P Berlinetta Speciale

Last updated
Ferrari 365 P Berlinetta Speciale
Ferrari - Pininfarina 356 P concept car (1).jpg
Overview
Manufacturer Pininfarina
Ferrari
Also calledBerlinetta Tre-posti
Ferrari Guida Centrale
Production1966
2 produced
Designer Aldo Brovarone at Pininfarina [1]
Body and chassis
Body style 2-door 3-seat berlinetta
Layout Rear mid-engine, rear-wheel-drive
Related Ferrari 365 P2
Powertrain
Engine 4.4 L (4390.35 cc) Colombo V12
Power output380 PS
Transmission 5-speed manual
Dimensions
Wheelbase 2,600 mm (102.4 in)
Length4,400 mm (173.2 in)
Width1,890 mm (74.4 in)
Height1,190 mm (46.9 in)
Curb weight 1,020 kg (2,249 lb)
See Ferrari 365 P2 for the race car

The Ferrari 365 P Berlinetta Speciale (also commonly referred to as the Berlinetta Tre-posti) was a concept sports car designed and produced by Pininfarina and Ferrari in 1966. It featured a mid-engined layout of a donor racing car chassis and three-seat arrangement with a central driving position, as later popularised on McLaren F1. It was the first purpose-built, mid-engined, road-going Ferrari-branded car. [2] Other similar Ferraris at that time were road-usable race cars like the 1965 250 LM 'Speciale'. [3]

Contents

Development

The conversion of racing cars' engine position from the front to the rear-mid position, did start to slowly influence the automakers to produce road cars with this specification. The first production car with this configuration was the 1962 René Bonnet Djet. [4] With this change so did the requirements for styling to match new mechanicals. Creation of the mid-engined, road-going sports car was inevitable and Pininfarina created three Ferrari-based prototypes to be at the forefront of this revolution. One of those projects was the "Tre-posti" or a three-seater in Italian, the Ferrari 365 P Berlinetta Speciale. [5]

Sergio Pininfarina was responsible for the initiation of the project as soon to be Head of Pininfarina. Up to this point Enzo Ferrari steadfastily refused to create a road-going car with a V12 engine in the mid-rear position and to involve an untraditional design language. Both US Ferrari importer Luigi Chinetti and Head of Fiat Gianni Agnelli were interested in acquiring such cars for themselves. [6]

While Ferrari did not immediately create any road cars in this specification, the Berlinetta Speciale did influence the marque's future styling and eventually the 365 GT/4 Berlinetta Boxer prototype emerged by 1971. [6]

Ferrari - Pininfarina 356 P concept car (8).jpg
Ferrari - Pininfarina 356 P concept car (9).jpg
Ferrari 365 P Berlinetta Speciale s/n 8971 of Luigi Chinetti.

Design

Had Ferrari built it, nobody would ever have given a second thought to the Miura
Luigi "Coco" Chinetti Junior [7]

The exterior design was loosely based on the existing road-going Dino concept, already sporting a mid-engine layout and presented just a year earlier, in 1965. Aldo Brovarone as Pininfarina's soon to be Head of Styling and creator of all the road-going Dino exterior designs, is also credited with the Berlinetta Speciale. Because of the many similarities to the production Dino 206 GT, the Berlinetta Speciale is both seen as a scaled up version of the original Dino and its predecessor, presented at the same time as the Dino Berlinetta GT final prototype, in 1966. [8]

Pininfarina created the bodies in aluminium, over a mid-engine competition chassis. The most unusual feature was the triple seating with the driver situated in the center, slightly forward, with the other two seats slightly back. The center-mount windshield wiper was carried from the donor race car. New were the luxury additions like leather seats, carpets, chrome bumpers and fittings. [6] The overall shape was very similar to both the Dino Berlinetta Speciale and more so to the Dino Berlinetta GT, the final prototype before the production variant. Apart from the seating arrangement, also the overall dimensions and shape were altered to accommodate a bigger V12 powerplant. The Ferrari Berlinetta Speciale was also known as "Tre-Posti" for its unique seating design. [9]

Additional features included a full fixed Perspex sunroof, originally installed on one of the examples, that was highly advanced for its time. Overall side profile and details like a visible fuel cap, tearshaped air vents were similar to the Dino counterparts. Inside the chrome roll bar was integrated for additional protection. [10]

Examples

Only two examples were ever created with various distinctive details, both in 1966. [9]

Chassis 8971

Ferrari - Pininfarina 356 P concept car (6).jpg
Ferrari - Pininfarina 356 P concept car (4).jpg
Centre driving position and seating arrangement.

Two racing chassis of the 365/P2 type were used by Pininfarina to create the usable concept cars. The first of them was built on chassis 8971 and was the one destined to be a show car. [9] [11] Completed in September 1966 and finished in Garenia White paint, the first example was presented, in October the same year, at the Paris Motor Show on Pininfarina stand. Interior, with the three seats, were upholstered in a black imitation leather. It was however lacking any running gear at that time. [12]

The Berlinetta Speciale chassis 8971, was presented all around the world on numerous occasions during 1966 and 1967, appearing at Earl's Court in London, Brussels, Geneva, and Los Angeles motor shows and salons. After the show tour, US Ferrari importer Luigi Chinetti, acquired the car in May 1967. It was invoiced by Ferrari for the racing chassis with modifications and by Pininfarina for the bodywork and tooling bills. The reported price was around US$21,160, without shipping costs. Chinetti soon sold and bought back the car twice to his customers, at first to a New York banker for US$26,000. [6]

From 1969, the Berlinetta Speciale remained in the Chinetti family, being used by Chinetti's son Luigi "Coco" Chinetti Junior. In 2014 Gooding & Co. offered the car for sale and even though the reserve was not met and the car unsold, the high bid was US$23.5 million. [13]

Chassis 8815

Berlinetta Speciale s/n 8815 of Gianni Agnelli. Standing from left: Mike Parkes, Gianni Agnelli, Giovanni Nasi, Renzo Carli and Sergio Pininfarina. Ferrari365Pa.jpg
Berlinetta Speciale s/n 8815 of Gianni Agnelli. Standing from left: Mike Parkes, Gianni Agnelli, Giovanni Nasi, Renzo Carli and Sergio Pininfarina.

You didn't have time to stop before people were immediately around it. But it was fun. It had monstrous acceleration. You just had to get used to the driver's seat in the middle, because it gave an ideal any reference points to either side, right or left.
Gianni Agnelli on his Berlinetta Speciale. [10]

The second example, chassis 8815, was reportedly commissioned by Head of Fiat Gianni Agnelli himself, upon seeing the first example presented at the Paris Motor Show. He took delivery of the car sometime in 1966. [14] This example was finished in metallic grey with black-painted line along the length of the car. Originally it had no sunroof but had it installed early on. The car was delivered with a large, chromed rear spoiler and with fabric covered seats and during its lifetime was repainted in metallic blue and then red. [6] [10]

2 models at London Design Museum 2018.jpg
Enzo and Battista at London Design Museum 2018.jpg
Poster of Battista Pininfarina (left) and Enzo Ferrari (right) over wooden buckframe of 365 P Berlinetta Speciale at London Design Museum.

Specifications

Engine and transmission

Cars were powered by a racing Colombo 60° V12 engine, carried over from the Ferrari 365 P2, with SOHC valvetrain actuating two valves per cylinder. It was mounted in the rear mid-engine, rear-wheel-drive layout of the car, lognitudinally with the transaxle-type, 5-speed manual gearbox. Total capacity of 4,390 cc (4.4 L; 267.9 cu in) resulted from internal measurements of 81 by 71 mm (3.2 by 2.8 in) of bore and stroke respectively. [15]

Fuel was fed by three Weber 40DFI carburettors and with 8.8:1 compression ratio the resulting power output was 380 PS (279 kW; 375 hp) at 7,300 rpm. Engines also retained the dry-sump lubrication system from the racing specification. Top speed was estimated at 245 km/h (152.2 mph). [9] Engine was not detuned as compared to the original. [16]

Chassis and suspension

The mid-engine, tubular competition chassis was similar to that of Ferrari 330 P2 and taken from the 365 P2 customer version, the same as used by Luigi Chinetti's NART team in 1965, with addition of a roll bar and cast aluminium wheels. [6] The wheelbase, measuring 2,600 mm (102.4 in), was 200 mm (7.9 in) stretched over the original frame. [16]

Cars had independent suspension front and back, with unequal-length wishbones, coil springs, telescopic shock absorbers and an anti-roll bars. The four wheel disc brakes were servo-assisted. The kerb weight was 1,020 kg (2,249 lb) and the total length 4,400 mm (173.2 in). [9]

See also

Related Research Articles

<span class="mw-page-title-main">Ferrari</span> Italian luxury sports car manufacturer based in Maranello, Italy

Ferrari S.p.A. is an Italian luxury sports car manufacturer based in Maranello, Italy. Founded in 1939 by Enzo Ferrari (1898–1988), the company built its first car in 1940, adopted its current name in 1945, and began to produce its current line of road cars in 1947. Ferrari became a public company in 1960, and from 1963 to 2014 it was a subsidiary of Fiat S.p.A. It was spun off from Fiat's successor entity, Fiat Chrysler Automobiles, in 2016.

<span class="mw-page-title-main">Dino (marque)</span> Motor vehicle

Dino was a marque best known for mid-engined, rear-drive sports cars produced by Ferrari from 1957 to 1976. The marque came into existence in late 1956 with a front-engined Formula Two racer powered by a brand new Dino V6 engine. The name Dino was used for some models with engines smaller than 12 cylinders, it was an attempt by the company to offer a relatively low-cost sports car. The Ferrari name remained reserved for its premium V12 and flat-12 models until 1976, when "Dino" was retired in favour of full Ferrari branding.

<span class="mw-page-title-main">Ferrari Berlinetta Boxer</span> Motor vehicle

The Ferrari Berlinetta Boxer (BB) is series of sports cars produced by Ferrari in Italy between 1973 and 1984. The BB was designed by Leonardo Fioravanti at Pininfarina. The first BB model, the 365 GT4 BB, replaced the front engined Daytona and was the first in a series of road-going Ferraris equipped with a mid-mounted flat-twelve engine. It was also the first mid-engined road-car to bear the Ferrari name and the Cavallino Rampante logo. The 365 GT4 BB was succeeded in 1976 by the BB 512, equipped with a larger displacement engine, then by the fuel-injected BB 512i in 1981. The series was discontinued in 1984 when the BB 512i was replaced by the Testarossa, which used a revised version of the flat-twelve engine.

<span class="mw-page-title-main">ASA (automobile)</span> Motor vehicle

ASA was an Italian automobile manufacturer active from 1961 to 1969, who is known for manufacturing the ASA 1000 GT. This car was developed by Ferrari engineers in the late 1950s as a less expensive, compact alternative to existing Ferrari GT cars. ASA used inline-four and straight-six engines derived from the "250" 3-litre V12 designed by Gioacchino Colombo. The chassis was developed by Giotto Bizzarrini and was derived from the tubular frame chassis of the 250 GTO.

<span class="mw-page-title-main">Ferrari 275</span> Motor vehicle

The Ferrari 275 is a series of front-engined V12-powered grand touring automobiles with two-seater coupé and spider bodies produced by Ferrari between 1964 and 1968. The first 275 series cars were powered by a 3.3 L (3286 cc) overhead camshaft Colombo 60° V12 engine producing 260–320 hp (190–240 kW). An updated 275 GTB/4 was introduced in 1966, with a revised four overhead camshaft engine producing 300 hp (220 kW). The 275 series were the first road-going Ferraris equipped with a transaxle and independent rear suspension.

<span class="mw-page-title-main">Ferrari Daytona</span> Motor vehicle

The Ferrari Daytona is a two-seat grand tourer produced by Ferrari from 1968 to 1973. It was introduced at the Paris Auto Salon in 1968 to replace the 275 GTB/4, and featured the 275's Colombo V12 bored-out to 4,390 cc. It was offered in berlinetta and spyder forms. The car came in two variants: the 365 GTB/4 coupe, and the 365 GTS/4 convertible.

<span class="mw-page-title-main">Ferrari 550</span> Grand tourer produced by Ferrari

The Ferrari 550 Maranello is a front-engine V12 2-seat grand tourer built by Ferrari from 1996 to 2002. The 550 Maranello marked Ferrari's return to a front-engine, rear-wheel drive layout for its 2-seater 12-cylinder model, 23 years after the 365 GTB/4 Daytona had been replaced by the mid-engined Berlinetta Boxer.

<span class="mw-page-title-main">Ferrari America</span> Motor vehicle

Ferrari America is a series of top-end Ferrari models built in the 1950s and 1960s. They were large grand touring cars with the largest V12 engines and often had custom bodywork. All America models used a live axle in the rear, were front-engined, and had worm and sector steering.

<span class="mw-page-title-main">Ferrari 250</span> Series of sports cars and grand tourers built by Ferrari from 1952 to 1964

The Ferrari 250 is a series of sports cars and grand tourers built by Ferrari from 1952 to 1964. The company's most successful early line, the 250 series includes many variants designed for road use or sports car racing. 250 series cars are characterized by their use of a 3.0 L (2,953 cc) Colombo V12 engine designed by Gioacchino Colombo. They were replaced by the 275 and 330 series cars.

<span class="mw-page-title-main">Luigi Chinetti</span> Italian born racecar driver

Luigi Chinetti was an Italian-born racecar driver, who emigrated to the United States during World War II. He drove in 12 consecutive 24 Hours of Le Mans races, taking three outright wins there and taking two more at the Spa 24 Hours race. Chinetti owned the North American Racing Team, which successfully ran privateer Ferraris in sports car and Formula One races. For many years he was the exclusive American importer of Ferrari automobiles to the United States.

The Ferrari P was a series of Italian sports prototype racing cars produced by Ferrari during the 1960s and early 1970s.

The Ferrari 330 was a series of V12 powered automobiles produced by Ferrari in 2+2 GT Coupé, two-seat Berlinetta, spyder, and race car versions between 1963 and 1968. The name "330" refers to the approximate displacement of each single cylinder in cubic centimeters.

Ferrari is an Italian company which has produced sports cars since 1947, but traces its roots back to 1929 when Enzo Ferrari formed the Scuderia Ferrari racing team.

<span class="mw-page-title-main">Pininfarina</span> Italian car design firm and coachbuilder

Pininfarina S.p.A. is an Italian car design firm and coachbuilder, with headquarters in Cambiano, Turin, Italy. The company was founded by Battista "Pinin" Farina in 1930. On 14 December 2015, the Indian multinational giant Mahindra Group acquired 76.06% of Pininfarina S.p.A. for about €168 million.

<span class="mw-page-title-main">Sergio Pininfarina</span> Italian politician

Sergio Pininfarina, born Sergio Farina, was an Italian automobile designer and Senator for life.

<span class="mw-page-title-main">Leonardo Fioravanti (engineer)</span> Italian automobile designer (born 1938)

Leonardo Fioravanti is an Italian automobile designer and CEO of Fioravanti Srl.

The Turin Motor Show was an auto show held annually in Turin, Italy. The first official show took place between 21 and 24 April 1900, at the Castle of Valentino, becoming a permanent fixture in Turin from 1938 having shared it with Milan and Rome until that time. From 1972, the show was held biannually and in 1984, it moved into Fiat's shuttered Lingotto factory.

<span class="mw-page-title-main">Aldo Brovarone</span> Italian automobile designer (1926–2020)

Aldo Brovarone was an Italian automobile designer and the chief stylist with Carrozzeria Pininfarina (1974-1988) – widely known for a prominent range of work including the Dino 206 GT, Lancia Gamma Coupé and the Peugeot 504 (sedan).

<span class="mw-page-title-main">Dino 206 S</span> Motor vehicle

The Dino 206 S is a sports prototype produced by Ferrari in 1966–1967 under the Dino marque. Ferrari intended to produce at least fifty examples for homologation by the CSI in the Sport 2.0 L Group 4 category. As only 18 were made, the car had to compete in the Prototype 2.0-litre class instead. In spite of this handicap the Dino 206 S took many class wins. The 206 S was the last of the Dino sports racing cars and simultaneously the most produced.

References

  1. ↑ "Ferrari 365 P Berlinetta Speciale". carrozzieri-italiani.com. Retrieved 5 April 2024.
  2. ↑ "Magnificent one-off three-seater 1966 Ferrari 365 P Berlinetta Speciale to be auctioned". motor1.com. Retrieved 17 January 2021.
  3. ↑ "Ferrari 250 LM Pininfarina Stradale Speciale". ultimatecarpage.com. Retrieved 20 January 2021.
  4. ↑ Silvestro, Brian (2019-09-16). "You Can Drive the Same Car As the First Man in Space". Road & Track. Retrieved 2020-04-05.
  5. ↑ "Ferrari 365 P Berlinetta Speciale: The Three-Seater That Gave Birth To The Dino". autoclassmagazine.com. Retrieved 17 January 2021.
  6. 1 2 3 4 5 6 "One-of-two Ferrari 365 P "Tre Posti" to join Dream Cars exhibit on its move to Indianapolis". hemmings.com. Retrieved 17 January 2021.
  7. ↑ "Three-Seat, One-Off 1966 Ferrari 365P Heads to Auction, Should Command Many Millions". caranddriver.com. Retrieved 17 January 2021.
  8. ↑ "1966 Ferrari 365 P Berlinetta Speciale (Pininfarina)". carstyling.ru. Retrieved 17 January 2021.
  9. 1 2 3 4 5 "1966 Ferrari 365 P Berlinetta Speciale". supercars.net. Retrieved 17 January 2021.
  10. 1 2 3 "365 P Jewel: Ferrari History". ferrari.com. Retrieved 17 January 2021.
  11. ↑ "Ferrari 365 P Speciale - Berlinetta Tre Posti". autogen.pl (in Polish). Retrieved 17 January 2021.
  12. ↑ "365 P s/n 8971". barchetta.cc. Retrieved 17 January 2021.
  13. ↑ "A Closer Look at the 1966 Ferrari 365 P Berlinetta Speciale Tre Posti 8971". moneyinc.com. Retrieved 17 January 2021.
  14. ↑ "Detail – 365 P 8815". barchetta.cc. Retrieved 17 January 2021.
  15. ↑ "Ferrari 365 P Berlinetta Speciale – 1966". ruotevecchie.org (in Italian). Retrieved 17 January 2021.
  16. 1 2 "Ferrari 365 P (1965)". ferrari.com. Retrieved 17 January 2021.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.