Ferrari 250 Monza

Last updated
Ferrari 250 Monza
1955TriesteOpicina-1954Ferrari250Monza.jpg
Ferrari 250 Monza Pinin Farina Spyder
Overview
Manufacturer Ferrari
Also calledFerrari Super Monza
Production1954
4 produced [1]
Designer
Body and chassis
Body style Spyder
Layout Front mid-engine, rear-wheel-drive
Powertrain
Engine 3.0 L (2953.21 cc) Tipo 107 Colombo V12
Power output240 PS
Transmission 4-speed manual
Dimensions
Wheelbase 2,400 mm (94.5 in)
Curb weight 850 kg (1,874 lb)
Chronology
Predecessor Ferrari 250 MM
Successor

The Ferrari 250 Monza was a sports racing car produced by Ferrari in 1954. It was a combination of a stretched chassis and body from the line of inline-four-engined racers with an ubiquitous 3.0-litre Colombo V12 engine. [2]

Contents

Development

After ongoing success of inline-four engines in Formula One, Ferrari also employed those powerplants for their sports racing cars. Enzo Ferrari was unhappy with replacing the smaller capacity V12 race cars with inline-engined racers and wanted to ensure the use of his beloved engine. The inline-four engines produced a better low-end torque and the V12's were superior in higher revs and peak power output. [3]

The 250 Monza was powered by the three-litre version of the Colombo V12 engine of the similar specification as used in the 250 MM, developed a year earlier. It was then mounted in the tried and capable, elongated version of the 500 Mondial chassis. [4] A total of only four of these "hybrid" sports racing cars were created. [1] Three of them were bodied in aluminium by Pinin Farina with a design based to that fitted on the roadster body of the 500 Mondial with necessary modifications due to a different powerplant. The hood of the car received an air-scoop for centre mounted carburettors. The single remaining chassis received a Scaglietti two-seater spyder body in the style of the 750 Monza to an Alfredo Ferrari design. [5]

One car was retained by the Scuderia Ferrari works team, while the remaining three were sold to an Italian customer Franco Cornacchia of Scuderia Guastalla. [5] The first 250 Monza was created in May of 1954, as a prototype of the series. S/n 0432M received a Pinin Farina Spyder bodywork and an engine of a different type than the rest, the Tipo 117. It was originally sold new to Cornacchia before he sold it on to Luigi Piotti for 3.5 million Lire. [6] The car was then acquired by Luigi Chinetti, who send it to Scaglietti before shipping it to the United States. A new 'pontoon fender' spyder body was created around 1957, and it is believed to be a precursor to the production 250 Testa Rossa body from 1958. The car was finished in white with a blue stripe and briefly raced in North America. When offered for sale in 1961 it was referred to as a "Ferrari Super Monza". [7]

The 250 Monza, s/n 0420M was the only works car used by Scuderia Ferrari. After a victorious debut race it was presented at the Amsterdam motor show, where it was sold to Hans Maasland of Netherlands. When the car was damaged at the second heat race at Zandvoort, it was sent back to the factory where it received a new body made by Pinin Farina in their same style. By 1955 the car was passed on to Hans Tak. [8]

The s/n 0442M was the third Monza built and the only originally bodied by Scaglietti. It was sold new to Franco Cornacchia who drove it with Gerino Gerini. [9] After the 1954 Carrera Panamericana the car was sold to Mercedes-Benz dealer Manfredo Lippmann from Guatemala, who tried to enter the car for the 1955 12 Hours of Sebring, but damaged the car before the race. [10] In 2002, the Ferrari 250 Monza Scaglietti Spyder, s/n 0442M was sold on RM auction for US$ 1.7 million. [11]

The last chassis, s/n 0466M was also bodied by Pinin Farina and sold new to Cornacchia. At some point it was offered for sale, in an unrestored state, for €5 million. [12]

Although intended as a replacement for the 250 MM in an open variant and an alternative to the 3.0-litre 750 Monza, the lack of immediate success forced Ferrari to focus on its inline-four family of open top racers and the upcoming straight-six models. [4]

Ferrari 0432M at CF 20234333.jpg
Ferrari 0432M at CF 20234329.jpg
Ferrari 0432M at CF 20234330.jpg
250 Monza rebodied by Scaglietti as 'pontoon fender' spyder

Specifications

250 Monza Scaglietti Spyder driven by Franco Cornacchia and Gerino Gerini to a third place during GP Supercortemaggiore at Monza 1954-06-27 Monza Ferrari 250 Monza 0442M Cornacchia Gerini.png
250 Monza Scaglietti Spyder driven by Franco Cornacchia and Gerino Gerini to a third place during GP Supercortemaggiore at Monza

Engine and transmisson

The Ferrari 250 Monza was powered by a SOHC Colombo 60° V12 engine with total displacement of 2,953.21 cc (3.0 L; 180.2 cu in). The engine was designated Tipo 107, while the prototype car was powered by a Tipo 117 engine. The fuel was fed by three quad-choke Weber 36IF/4C carburettors with the resulting maximum power output of 240 PS (177 kW; 237 hp) at 7200 rpm with 9:1 compression ratio. Ignition was by a single spark plug per cylinder, served by two magnetos. The engine was lubricated with a wet sump oil system. A transmission, mounted at the rear for better weight balance, had four gears. [13] [1] [14]

Chassis

The Tipo 504 tubular steel chassis was derived from the 500 Mondial chassis, modified to accept the larger V12 engine in place of the 500 Mondial's inline-four. The wheelbase was extended by 150 mm (5.9 in) to 2,400 mm (94.5 in). The fuel tank had a capacity of 125 litres. [3] [13] [15]

Suspension

The front suspension was independent with unequal-length double wishbones, transverse leaf spring and Houdaille hydraulic shock absorbers. At the rear the ubiquitous De Dion axle with rear mounted gearbox were installed along with, twin radius arms, semi-elliptic springs and Houdaille hydraulic shock absorbers. The brakes were hydraulic drums all-round. [16] [4]

Racing

250 Monza Pinin Farina Spyder at Zandvoort Autoraces op Zandvoort, Bestanddeelnr 908-6632.jpg
250 Monza Pinin Farina Spyder at Zandvoort

The Ferrari 250 Monza debuted at the 12 Hours of Hyères endurance race of 1954 and was driven by Maurice Trintignant and Luigi Piotti. [17] They drove the Pinin Farina bodied car entered by Scuderia Ferrari, s/n 0420M, and won the race against smaller-engined 500 Mondial of Picard and Pozzi. It remained the only entry of the 250 Monza as a works car. [18] [8] Scuderia Guastella entered two of theirs cars for the 1954 Supercortemaggiore. Pinin Farina Spyder, driven by Piotti/Robert Manzon duo finished on 11th place, while the Scaglietti Spyder with Franco Cornacchia and Gerino Gerini placed on the third podium step. The first two places went to 3.0-litre Ferrari inline-four racers. [19] [6] Gerini then embarked solo on a series of races, winning Trofeo Sardo and scoring a second place overall at Bolzano-Mendola hillclimb. [20] [9]

Three 250 Monzas were fielded in July for Coppa d'Oro delle Dolomiti. Gerini in his Scaglietti Spyder were third overall and first in S+2.0 class. Franco Cornacchia entered his brand new Pinin Farina Syder, the last chassis made, and finished on a 15th place. Luigi Piotti who recently bought the car from Scuderia Guastalla did not finish the race. [21] For the 10 Hours of Messina race two cars were entered but non had crossed the finish line. This time for the night driving, Piotti employed Umberto Maglioli as a second driver. [17] At the Circuito di Senigallia, later the same year, for the S+2.0 class, Gerino Gerini scored a second place representing Scuderia Guastalla. The first place went to 750 Monza of Scuderia Ferrari. [22] Circuito di Reggio Calabria race of 1954 was won by privateer Luigi Piotti. [23]

The Scuderia Ferrari car was sold to a Hans Maasland who entered it into International Sports Car race at Zandvoort. Car was driven by Joke Maasland who finished the first heat of the race at a second place in class, but had an accident in the second heat. [8] The Scaglietti Spyder of Scuderia Guastalla was entered in the last edition of the gruelling 1954 Carrera Panamericana. Franco Cornacchia was aided by Enrico Peruchini and both had raced to a fifth overall and third in class. [24] The best result for a 250 Monza at the 1955 Mille Miglia was a 15th overall and a sixth in class by Erasmo "Kammamuri" Simeoni. He would also finish Trieste-Opicina hillclimb on a fourth place. [25] [6]

The damaged car from Zandvoort was repaired by the factory and sold to Hans Tak, also from Netherlands, who campaigned the car from 1955 though 1959. He won its class at 1955 International Sports Car race at Zandvoort, 1956 Nationale Sportwagen race at Pinksterrace and 1959 National Sports Car race, also at Zandvoort. [8]

Related Research Articles

<span class="mw-page-title-main">Carrozzeria Scaglietti</span> Italian automobile design and coachbuilding company

Carrozzeria Scaglietti was an Italian automobile design and coachbuilding company active in the 1950s. It was founded by Sergio Scaglietti in 1951 as an automobile repair concern, but was located across the road from Ferrari in Maranello outside Modena, Italy.

<span class="mw-page-title-main">Ferrari America</span> Motor vehicle

Ferrari America is a series of top-end Ferrari models built in the 1950s and 1960s. They were large grand touring cars with the largest V12 engines and often had custom bodywork. All America models used a live axle in the rear, were front-engined, and had worm and sector steering.

<span class="mw-page-title-main">Ferrari 250</span> Series of sports cars and grand tourers built by Ferrari from 1952 to 1964

The Ferrari 250 is a series of sports cars and grand tourers built by Ferrari from 1952 to 1964. The company's most successful early line, the 250 series includes many variants designed for road use or sports car racing. 250 series cars are characterized by their use of a 3.0 L (2,953 cc) Colombo V12 engine designed by Gioacchino Colombo. They were replaced by the 275 and 330 series cars.

The Ferrari P was a series of Italian sports prototype racing cars produced by Ferrari during the 1960s and early 1970s.

<span class="mw-page-title-main">Ferrari 195 S</span> Motor vehicle

The Ferrari 195 S was a sports racing car produced by Ferrari in 1950. It was an improved version of the 166 MM. The 195 S won Mille Miglia, Coppa della Toscana and Giro delle Calabria.

<span class="mw-page-title-main">Ferrari 250 S</span> Motor vehicle

The Ferrari 250 S was a sports racing car produced by Ferrari in 1952. It was the first in the long lineage of Ferrari 250 road and race cars powered by a ubiquitous 3.0-litre Colombo V12 engine. In 1952 the 250 S won the Mille Miglia and 12 Hours of Pescara. At the Le Mans, the same year, it clocked the fastest race lap time. Only a single example was produced.

<span class="mw-page-title-main">Ferrari 225 S</span> Motor vehicle

The Ferrari 225 S was a sports racing car produced by Ferrari in 1952. It was an evolution over the preceding Ferrari 212 Export with important engine upgrades that greatly improved power output. The model was extensively used in competition, winning many international races. The most important include 1952 Monaco Grand Prix for sports cars, Portuguese Grand Prix, Coppa d'Oro di Sicilia, Coppa della Toscana, Coppa d'Oro delle Dolomiti and many others. It was the final Colombo V12 engine iteration before the 250-family stretched it to 3.0-litres capacity.

<span class="mw-page-title-main">Ferrari Monza</span> Motor vehicle

The Ferrari Monza is one of a series of cars built by Ferrari. In the early 1950s, Ferrari shifted from using the compact Gioacchino Colombo-designed V12 engine in its smallest class of sports racers to a line of four-cylinder engines designed by Aurelio Lampredi. Inspired by the success of the light and reliable 2.5 L 553 F1 car, the four-cylinder sports racers competed successfully through the late 1950s, culminating with the famed 500 Mondial and 750 Monza.

<span class="mw-page-title-main">Ferrari 212 Export</span> Motor vehicle

The Ferrari 212 Export was a sports racing car produced by Ferrari in 1951–1952. The 212 Exports won Tour de France automobile, Giro di Sicilia, Coppa della Toscana, 10 Hours of Messina and other motor races throughout its career. It was meant to be a sports car available for oversea markets.

<span class="mw-page-title-main">Ferrari 375 Plus</span> Motor vehicle

The Ferrari 375 Plus is a sports racing car produced by Ferrari in 1954. The model competed internationally, winning many major races, including 24 Hours of Le Mans, Carrera Panamericana, 1000km of Buenos Aires, Agadir GP and Silverstone.

<span class="mw-page-title-main">Ferrari 375 MM</span> Motor vehicle

The Ferrari 375 MM, was a sports racing car produced by Ferrari in 1953 up to 1955 for the road cars. It was named "375" for the unitary displacement of one cylinder in the 4.5 L V12 engine, and the "MM" stood for the Mille Miglia race. In total 26 units were made, including four converted from the 340 MM.

<span class="mw-page-title-main">Ferrari Jano engine</span> Reciprocating internal combustion engine

Vittorio Jano designed a new 60° V12 engine for sports car racing for Ferrari. This new engine, introduced in 1956, combined elements of both Colombo and Lampredi engines with new features. Engine architecture was more of Lampredi school but retained smaller Colombo internal measurements. Jano moved to Ferrari along with his designs for the Lancia D50 in 1955 and went on to design not only a new V12 but also a family of the Dino V6 engines soon after. Some of the technical ideas came from the Jano's Lancia V8 DOHC engine, intended for Formula One. This family of engines replaced Lampredi inline-4s known from Ferrari Monza line and went on to win many international races and titles for Ferrari. The design team comprised Jano as well as Vittorio Bellentani, Alberto Massimino, and Andrea Fraschetti.

<span class="mw-page-title-main">Ferrari 410 S</span> Motor vehicle

The Ferrari 410 S was a sports racing car produced by Ferrari in 1955–1956. After the racing successes of 375 Plus, mainly in 1954 Carrera Panamericana, Ferrari decided to prepare another model for this marathon. The 410 S was intended as a long-distance race car originally designed for the 1955 Carrera Panamericana and was the final model of the Lampredi V12 sports car lineage. The next generation of sports racing cars that replaced the 410 S were powered by the new Jano V12 engines.

<span class="mw-page-title-main">Ferrari 250 MM</span> Motor vehicle

The Ferrari 250 MM was a sports racing car produced by Ferrari in 1953. After the initial racing successes of the 3.0-litre Colombo V12 engine, introduced in the 250 S one-off, Ferrari produced a serial racing model. It is best recognisable for the distinctive closed berlinetta bodywork by Pinin Farina. The "MM" in its name stood for the Mille Miglia race.

<span class="mw-page-title-main">Ferrari 376 S</span> Motor vehicle

The Ferrari 376 S was a sports racing car produced by Ferrari in 1955. It was the first raced Ferrari powered by a new Aurelio Lampredi-designed inline-6 engine, created as a larger alternative to the inline-4 series of engines used in the Ferrari Monza race cars. The intention behind the development of this model was the 1955 Mille Miglia race. It was yet another attempt by Ferrari to match the new Mercedes-Benz 300 SLR in competition. All of the created cars were further converted into a bigger capacity models.

<span class="mw-page-title-main">Ferrari 735 LM</span> Motor vehicle

The Ferrari 735 LM was a sports racing car produced by Ferrari in 1955. It was the second raced Ferrari, powered by an Aurelio Lampredi-designed inline-6 engine, created as a larger displacement evolution to the engines used in the Ferrari Monza race cars.

<span class="mw-page-title-main">Ferrari 290 S</span> 1957 sports car

The Ferrari 290 S was a sports racing car produced by Ferrari in 1957. It was a development of an earlier 290 MM race car that won the 1956 Mille Miglia. The 290 S was the first sports car manufactured by Ferrari to be powered by a DOHC V12 engine. Its career was very short but it served as an important milestone in the Jano V12-powered lineage.

<span class="mw-page-title-main">Ferrari 250 GT Coupé</span> 1954–1960 grand touring car produced by Ferrari

The Ferrari 250 GT Coupé represented a series of road-going, grand touring cars produced by Ferrari between 1954 and 1960. Presented at the 1954 Paris Motor Show, the 250 Europa GT was the first in the GT-lineage. The design by Pinin Farina was seen as a more civilised version of their sporty Berlinetta 250 MM. Series built cars were an answer to the wealthy clientele demands of a sporty and luxurious Ferrari Gran Turismo, that is also easier to use daily.

<span class="mw-page-title-main">Ferrari 412 S</span> Motor vehicle

The Ferrari 412 S was a unique sports racing car produced by Ferrari in 1958. The 412 S combined Ferrari's most powerful V12 engine to date with a one-off experimental racing chassis. It was also incorrectly called as the 412 MI due to being built around an engine from the 500 Miles of Monza racer. The car was created specifically for John von Neumann to take on the American racing cars Scarabs in SCCA racing. Its famed drivers included Phil Hill and Richie Ginther.

References

  1. 1 2 3 "Ferrari 250 Monza - Register". barchetta.cc. Retrieved 30 December 2019.
  2. "1954 Ferrari 250 Monza". supercars.net. 16 April 2016. Retrieved 30 December 2019.
  3. 1 2 Eaton, Godfrey (1983). Ferrari: The Road And Racing Cars. Haynes Publishing. pp. 67–68.
  4. 1 2 3 Acerbi, Leonardo (2012). Ferrari: All The Cars. Haynes Publishing. pp. 80–81.
  5. 1 2 "1954 Ferrari 250 Monza". conceptcarz.com. Retrieved 30 December 2019.
  6. 1 2 3 "250 Monza PF Spyder 0432M". barchetta.cc. Retrieved 30 December 2019.
  7. "Ferrari 250 Monza Scaglietti Pontoon Spyder". ultimatecarpage.com. Retrieved 30 December 2019.
  8. 1 2 3 4 "250 Monza PF Spyder 0420M". barchetta.cc. Retrieved 30 December 2019.
  9. 1 2 "250 Monza Scaglietti Spyder 0442M". barchetta.cc. Retrieved 30 December 2019.
  10. "Ferrari 250 Monza Scaglietti Spyder". ultimatecarpage.com. Retrieved 30 December 2019.
  11. "1954 Ferrari 250 Monza Spider". rmsothebys.com. Retrieved 30 December 2019.
  12. "Ferrari 250 Monza Pinin Farina Roadster". ultimatecarpage.com. Retrieved 30 December 2019.
  13. 1 2 "Ferrari 250 Monza". auto.ferrari.com. Retrieved 30 December 2019.
  14. "250 Monza Spyder Pinin Farina". mitorosso.com. Retrieved 30 December 2019.
  15. "500 Mondial PF Spyder 0426MD". barchetta.cc. Retrieved 30 December 2019.
  16. "250 Monza Spyder Scaglietti". mitorosso.com. Retrieved 30 December 2019.
  17. 1 2 "All Results of Ferrari 250 Monza". racingsportscars.com. Retrieved 30 December 2019.
  18. "Hyères 12 Hours 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  19. "Supercortemaggiore 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  20. "Trofeo Sardo 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  21. "Coppa d'Oro delle Dolomiti 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  22. "Circuito di Senigallia [S+2.0] 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  23. "Circuito di Reggio Calabria 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  24. "Carrera Panamericana 1954 - Race Results". racingsportscars.com. Retrieved 30 December 2019.
  25. "Mille Miglia 1955 - Race Results". racingsportscars.com. Retrieved 30 December 2019.

Bibliography