The Ferrari 125 C is an open-wheel single-seater racing car, designed, developed, and produced by Ferrari in 1947 as a single example. It competed primarily in Formula Libre contests and events. [1]
The model originated from the 125 S, which was built by Ferrari in two examples in the same year of production as the "125 C". Compared to the ancestor car, the engine and gearbox were slightly modified. The most important changes, however, were made to the bodywork. The latter was in fact built in such a way as to have the possibility of removing the mudguards and the lights, with the relative electrical system, which made the model suitable for participating in competitions in the single-seater category. During the races, it was also possible to place a cover that covered the passenger seat. The model was equipped with an alight and resistant frame. [2]
The numerical abbreviation in the model name was linked to the characteristics of the engine; more precisely, it referred to the unit displacement, ie that relating to a single cylinder, which was approximately 125 cm³. The letter C instead meant Race or Competition.
The two most important victories of the model, both achieved in 1947, were at the Rome Grand Prix with Franco Cortese at the helm, and at the Arcangeli Cup with Tazio Nuvolari. [3]
The engine was a front and longitudinal 60° V12. The bore and stroke were 55 mm and 52.5 mm respectively, which brought the total displacement to 1496.77 cm³. The compression ratio was 9.5:1. The maximum power produced by the engine was 118 hp at 6800 rpm. [4]
The distribution consisted of a single overhead camshaft that controlled two valves per cylinder. The fuel system was supplied by three Weber brand carburetors and model 30 DCF. The ignition was single and the related system included two magnets. The lubrication was wet-sump, while the clutch was a single plate. [5]
The front suspensions were independent, with cross wishbones and leaf springs mounted in the same way, while the rear ones consisted of a rigid bridge, longitudinal semi-elliptical leaf springs, and stabilizer bar. Both had mounted hydraulic shock absorbers. The brakes were drum brakes, while the transmission consisted of a five-speed gearbox plus reverse. The steering was a worm screw and toothed sector.
The chassis was tubular in steel, while the body was a two-seater spider with uncovered wheels.
The maximum speed achieved by the model was 210 km/h (130 mph).
The Ferrari 575M Maranello is a two-seat, two-door, grand tourer manufactured by Italian automobile manufacturer Ferrari. Launched in 2002, it is essentially an updated 550 Maranello featuring minor styling changes from Pininfarina. The 575M was replaced by the 599 GTB in the first half of 2006.
The Fiat Dino was a front-engine, rear-wheel-drive sports car produced by Fiat from 1966 to 1973. The Dino name refers to the Ferrari Dino V6 engine, produced by Fiat and installed in the cars to achieve the production numbers sufficient for Ferrari to homologate the engine for Formula 2 racing.
The Ferrari F355 is a sports car manufactured by Italian car manufacturer Ferrari produced from May 1994 to 1999. The car is a heavily revised Ferrari 348 with notable exterior and performance changes. The F355 was succeeded by the all-new Ferrari 360 in 1999.
The Ferrari Mondial is a mid-engined, V8, grand tourer manufactured and marketed by Ferrari between 1980 and 1993 – with styling by Pininfarina and bodywork by Carrozzeria Scaglietti.
The Alfa Romeo 8C was originally a range of Alfa Romeo road, race and sports cars of the 1930s. In 2004 Alfa Romeo revived the 8C name for a V8-engined concept car which made it into production for 2007, the 8C Competizione.
The Monoposto Racing Club is a single seater, open-wheeled motor racing club in the United Kingdom. Its members race a variety of single seater race cars ranging from 600cc Jedi's to 2000cc Formula Three and Formula Renault cars. Monoposto is Italian for 'Single Seater'. As of 2010, it is the largest single seater championship in the UK, with over 60 regular race entrants.
The 125 F1 was Ferrari's first Formula One car. It shared its engine with the 125 S sports racer which preceded it by a year, but was developed at the same time by Enzo Ferrari, Valerio Colotti and designer, Gioacchino Colombo. Initially the racer was called 125 GPC for Gran Premio Città or Grand Prix Compressore before the Formula One era.
The Maserati A6GCM is a single seater racing car from the Italian manufacturer Maserati. Developed for Formula Two, 12 cars were built between 1951 and 1953.
The Bandini 1100 is a car model produced from 1947 until 1950 by the Italian company Bandini Cars. It was the successor to the early 1946 model. A racing version was produced under the name Bandini 1100 siluro.
The Bandini 1100 Siluro is a racing car produced from 1947 to 1949 by Bandini Automobili in Forlì, Italy.
The Bandini 750 sport siluro (torpedo) is a racing car, produced from 1950 to 1956 by the Italian company Bandini Cars.
The Bandini formula three is a racing car model produced from 1954 until 1958 by Bandini Automobili of Forlì.
The Ferrari 412 S was a unique sports racing car produced by Ferrari in 1958. The 412 S combined Ferrari's most powerful V12 engine to date with a one-off experimental racing chassis. It was also incorrectly called as the 412 MI due to being built around an engine from the 500 Miles of Monza racer. The car was created specifically for John von Neumann to take on the American racing cars Scarabs in SCCA racing. Its famed drivers included Phil Hill and Richie Ginther.
Ferrari manufactured a series of 3.0-litre, naturally-aspirated, V10 racing engines, exclusively for their Formula One race cars; between 1996 and 2005. They chose a V10 engine configuration, because it offered the best compromise between power and fuel efficiency; the V12 was powerful but thirsty, and vice versa for a V8. They switched to 2.4-litre naturally-aspirated V8 engine configuration for 2006. Over its decade-long evolution, power levels varied; from 715 hp @ 15,500 rpm in 1996, to over 900 horsepower, around 935 hp @ 19,000 rpm, toward the end of the 2005 season. The Tipo 05 series of engines, produced between 2001 and 2005, was officially stated to produce between 825 hp @ 17,800 rpm, and 865 hp @ 18,300 rpm. In qualifying mode, however, these engine were reputed to develop up to, or at times over, 900 horsepower (670 kW) at 19,000 rpm.
The Veritas Meteor was a Formula One and Formula 2 race car that raced for Veritas and private stables from 1951 until 1954.
The Ferrari 166 FL was a single-seat open-wheel race car, designed, developed and built by Italian manufacturer and team, Scuderia Ferrari, 1949 to 1952. Only three cars were produced. The designation 166 refers to the (rounded) displacement of a single cylinder, which corresponded to the nomenclature of the company at the time. The abbreviation FL stands for Formula Libre, which is the type of category and racing series that the car competed in. Since the car was mainly developed for racing in South America, it was also known as the 166 C America.
The Ferrari 166 F2 is an open-wheel formula racing single-seater car, designed, developed and built by Italian manufacturer and team Scuderia Ferrari, for Formula 2 racing, in 1948. This is the car in which Argentinian driver, and eventual five-time Formula One world champion, Juan Manuel Fangio, became known in Europe.
The Maserati 8CL is an open-wheel Grand Prix motor racing car, designed, developed and built by Italian manufacturer Maserati, from 1940 through 1946. Only two models were produced.
The Maserati 8CLT is an open-wheel race car, designed, developed and built by Italian manufacturer Maserati in 1950, conforming to Formula One rules and regulations of the time, set by the FIA.
The Ferrari Dino 166 F2 was an open-wheel Formula 2 race car, designed, developed, and built by Italian racing team Scuderia Ferrari, in 1967. A total of seven models were manufactured and produced.