Ferrari 288 GTO

Last updated
Ferrari 288 GTO
Ferrari 288 GTO (1).JPG
Overview
Manufacturer Ferrari
Also calledFerrari GTO
Production1984–1987
272 produced [1]
Designer Leonardo Fioravanti at Pininfarina
Nicola Materazzi (Chief Engineer)
Body and chassis
Class Sports car (S)
Body style 2-door berlinetta
Layout Rear mid-engine, rear-wheel-drive
Related Ferrari 308 GTB/GTS
Powertrain
Engine 2.9 L (2,855 cc) F114 B 000 twin turbo V8 [2]
Power output400 PS (294 kW; 395 bhp) and 496 N⋅m (366 lbf⋅ft) of torque
Transmission 5-speed manual [2]
Dimensions
Wheelbase 2,450 mm (96.5 in) [2]
Length4,290 mm (168.9 in) [2]
Width1,910 mm (75.2 in) [2]
Height1,120 mm (44.1 in) [2]
Kerb weight 1,160 kg (2,557.4 lb) (Dry) [2]
Chronology
Predecessor Ferrari 250 GTO
Successor Ferrari F40

The Ferrari GTO (often referred to as Ferrari 288 GTO) (Type F114) is an exotic homologation of the Ferrari 308 GTB produced from 1984 until 1987 in Ferrari's Maranello factory, designated GT for Gran Turismo and O for Omologata (homologated in Italian). [3]

Contents

Background

Ferrari 288 GTO rear view Ferrari 288 GTO (9287099236).jpg
Ferrari 288 GTO rear view
Rear view of a Ferrari 288 GTO 288celebration2.JPG
Rear view of a Ferrari 288 GTO

Contrary to what is reported historically in the press, the Ferrari GTO was not immediately born to compete in the new 1982 Group B Circuit Race series; Enzo Ferrari did not have overall control of the Road Car division, which was at the time managed by the General Director Eugenio Alzati and the FIAT MD (CEO) Vittorio Ghidella. In 1983 Mr. Ferrari noted from discussions with close friends and clients that the road car sales were falling due to stronger competition from rival car makers and what he described as the "excessive gentrification" of the Ferrari model lineup. [4] [5] [6]

Turbocharging: from F1 to road cars

The success of turbocharging in Formula 1 and the introduction of some new tax laws (above the 1999cc displacement threshold) had prompted Ferrari to first build the 208 Turbo and then discuss turbocharging also in 3 litre form for a road car which could produce 330 bhp. The first 208 turbo did not feature an intercooler so the performance and reliability was somewhat delicate due to high combustion temperatures. Ferrari approached the head of powertrain for the Gestione Sportiva (Racing Division), Nicola Materazzi, to give an opinion on the proposed specification for the new 3L turbo engine. Materazzi had joined from Osella in 1979 (before then at Lancia Reparto Corse) due to his experience with forced induction and had been involved in the 126 F1 car experimentation between Comprex and turbo. When Materazzi showed confidence that 400 bhp could be reliably extracted from 3000cc (133 bhp/litre), Ferrari placed his trust in him on condition that it would deliver as promised. Ferrari also jokingly suggested that Materazzi work on the 268 engine destined for the Lancia LC2 Group C racing car, due to similarities in displacement and mechanical parts. [6] [7]

Development

The Ferrari F114B road-car engine and the Lancia 2.6L V8 race engine developments progressed closely, with some draughtsmen employed from Abarth to complete detail design on components for manufacture at times when the Ferrari draughtsmen were at full capacity. In order to improve overall performance, several key aspects of the original 308 vehicle layout were altered: the engine did not grow in displacement but was turbocharged, it remained mid-mounted but now longitudinally instead of transversely, the wheelbase was elongated by 200 mm, the outer bodywork required modifications to maintain pleasing proportions. The car used water-cooled IHI turbochargers from Japan compared to the KK&K turbochargers used in Formula 1 due to the better materials and aerodynamic internal designs which allowed faster transient response. IHI had bought patents from Swiss manufacturer Brown Boveri (Baden) that had supplied Ferrari with the Comprex systems. [8]

Some of the GTO's styling features were first displayed on a 308 GTB design exercise by Pininfarina shown at the 1977 Geneva Auto Salon. The 288 GTO had started out as a modified version of the 308/328 to hold down costs and to build the car quickly, but little of the 308/328 was left when the 288 GTO was finished. Fortunately Ferrari could count on customers who were loyal when it came to spending more if they could access performance and style that was unmatched, so the unplanned deviation from the original cost targets did not necessarily prove an issue.

Easily noticeable differences were the GTOs bulging fender flares, larger front/rear spoilers, large "flag-style" outside mirrors and four driving lights at the far sides of the grille. Retained from the original 250 GTO were slanted air vents, put in the GTO's rear fenders to cool the brakes, as well as the rear wing's design, borrowed from the 250 GTO's original wing. The GTO also had wider body panels than the 308's because they had to cover much larger Goodyear tires mounted on racing wheels. The suspension's height could be set higher for road use and lower for racing on tracks. Bodywork material was new and lighter for better acceleration and handling. The GTO's weight was 2,555 lb (1,159 kg), compared to 3,085–3,350 lb (1,399–1,520 kg) for the 308/328. Steel was used just for the doors because major body panels were made from molded fiberglass. Kevlar was used for the hood, and the roof was made from Kevlar and carbon fiber.

All GTO road cars and GTO Evoluziones were left-hand drive and painted the most common Ferrai factory color - "Rosso Corsa" (aka "Racing Red"). [9] In 1990, one chassis was sent to Pininfarina for conversion to right-hand drive and a color change to "Dark Slate" with a red stripe before reaching its owners, the Brunei Royal Family. [10]

Materazzi felt that with the latest road speed limits and stricter fines, it was increasingly harder for clients to really prove the potential of cars with high performance. Ferrari asked what was his proposal, to which he suggested returning to racing in the GT class, something which had been interrupted after the 512 BB LM. The overall permission to modify the GTO road car into the Evoluzione for a racing programme however had to be ratified by Eugenio Alzati. He permitted it on conditions that the engineers interested in the project work outside of the Monday to Friday timetable (which was dedicated for development of 328 and other models). The lessons learnt during the development of the engine for the Lancia LC2 could be applied to the racing version of the GTO, such as the carefully engineered conicity of the intake plenums to ensure accurately balanced air flow and pressure to each cylinder and the setup of the turbochargers to produce in excess of 650 bhp.

The GTO Evoluzione included all the necessary modifications (bodywork, chassis, safety systems) to comply with the FIA regulations which permitted 20 cars per year to be specifically built for rally or track racing. Due to multiple deaths and the inherent danger involved with group B rally racing, the Group B Circuit series was suspended at the end of 1986. As a result, the GTO Evoluzione never raced.

Like any Ferrari car, the low production numbers for the GTO were intended to give an exclusive product for the enthusiast buyer. The number of GTOs produced did indeed fit in the minimum requirement of 200 required by the FIA and in fact the factory produced 70 more plus a couple extra to please the Agnelli family, an F1 driver or anybody else who the Commendatore predicted might insist on a last minute purchase option.

Although the production car test team, headed by Dario Benuzzi, did not include any of the Formula 1 drivers, Michele Alboreto occasionally had involvement in giving feedback on cars such as the 288 GTO, and later the 328 Turbo and F40. In particular he agreed with Enzo Ferrari's return to a breed of cars which were much more fiery, describing the GTO as "cattiva" (angry) and praising its low engine centre of gravity compared to the Testarossa. [11]

Engine

The GTO was based on the rear mid-engine, rear wheel drive 308 GTB, which has a 2.9 L (2,927 cc) V8. The "288" refers to the GTO's 2.8 litre DOHC 4 valves per cylinder V8 engine as it used a de-bored by 1 mm (0.04 in) with IHI twin-turbochargers, Behr air-to-air intercoolers, Weber-Marelli fuel injection and a compression ratio of 7.6:1. [12] The 2.85 litre engine capacity was dictated by the FIA's requirement for a turbocharged engine's capacity to be multiplied by 1.4. This gave the GTO an equivalent engine capacity of 3,997 cc (4.0 L; 243.9 cu in), just under the Group B limit of 4.0 litres.

Unlike the 308's 2,927 cc (2.9 L; 178.6 cu in) engine, the GTO's 2,855 cc (2.9 L; 174.2 cu in) V8 was mounted longitudinally, using the 308's rear trunk space. This was necessary to make room for the twin turbochargers and intercoolers. The racing transmission was mounted to the rear of the longitudinal engine, moving the rear differential and wheels aft. The arrangement also let the GTO use a more conventional race-car engine/transmission layout for such things as quick gear-ratio changes for various tracks. As a result, the wheelbase was 110 mm (4.3 in) longer at 2,450 mm (96.5 in). The track was also widened to accommodate wider wheels and tires (Goodyear NCT 225/55 VR16 tires mounted on 8 x 16 inch Speedline wheels at the front and 255/50 VR16 (265/50 VR16 for U.S. models) mounted on 10 x 16 inch wheels at the rear) to provide increased cornering and braking performance and the ability to apply 400 PS (395 bhp; 294 kW) at 7,000 rpm and 496 N⋅m (366 lb⋅ft) of torque at 3,800 rpm. [12] The GTO could accelerate from 0-60 mph (97 km/h) in around 5 seconds and Ferrari claimed 0-125 mph (201 km/h) in 15 seconds flat and a top speed of 189 mph (304 km/h), making it one of the fastest street-legal production cars of its time. [1]

288 GTO in North America

Ferrari did not "federalize" the 288 GTO for sale in America. Americans wanted the car anyway, and obtained it as a grey import vehicle. [13]

Performance

Test results by Road & Track : [14]

Evoluzione

Ferrari 288 GTO Evoluzione [16] [17] [18] [19] [20]
Ferrari 288 GTO.jpg
Overview
Manufacturer Ferrari
Production1986 (6 models built)
Designer Giuliano Michelotto at Pininfarina (Styling)
Body and chassis
Class Group B
Body style 2-door berlinetta
Layout Rear mid-engine, rear-wheel-drive
Chassis Steel tubular spaceframe, carbon-fiber/kevlar body
Powertrain
Engine 2.9 L (2,855 cc) F114 B 000 twin turbo V8
Power output650 hp (485 kW; 659 PS) and 479 lb⋅ft (649 N⋅m) of torque
Transmission 5-speed manual
Dimensions
Wheelbase 2,450 mm (96.5 in)
Length4,225 mm (166.3 in)
Width1,970 mm (77.6 in)
Height1,100 mm (43.3 in)
Curb weight 940 kg (2,072.3 lb)

Ferrari built six (five production models and one prototype) [21] 288 GTO Evoluzione models with more aggressive and aerodynamic body styling and increased power. The Evoluzione, introduced in 1986, was built to race in Group B but when that series was cancelled the project was also shelved as it was not fit for any other racing series. Ferrari had planned a production run of 20 cars to comply with Group B homologation requirements for Evolution models. The 288 GTO Evoluzione is powered by an upgraded version of the 2.9 L V8 used in the normal 288 GTO that has twin-turbochargers and produces 650 hp (485 kW; 659 PS) at 7,800 rpm. [22] It has a weight of around 940 kg (2,072 lb) and can reach a top speed of 225 mph (362 km/h). [23] It features a unique front end designed for aerodynamics with front canards, channels and vents as well as a large carbon fibre rear spoiler and numerous large NACA ducts. Many styling and mechanical elements from the Evoluzione influenced the soon to follow F40.

All six are thought to still be in existence with one owned by the Factory on display in the engine manufacturing facility in Maranello and another suspected to have been used as a prototype during the development of the F40. [22] [24]

Notable Owners

Several Formula 1 drivers were offered GTOs by Enzo Ferrari. These include Michele Alboreto (56195), Keke Rosberg (56653) and Niki Lauda (58329), who was gifted the last of the 272 units built, by Enzo Ferrari himself. [25] Michael Schumacher bought 54233 in April 1996 and drove it with number plate S GT 288.

Awards

In 2004, Sports Car International named this car number two on the list of Top Sports Cars of the 1980s, behind its German rival the Porsche 959.

Related Research Articles

<span class="mw-page-title-main">Ferrari 328</span> Motor vehicle

The Ferrari 328 GTB and GTS are mid-engine V8, two-seat sports cars created by Italian automobile manufacturer Ferrari. It was the successor to the Ferrari 308 GTB and GTS. While mechanically still based on the 308, modifications were made to the body, chassis, and engine, most notably an increase in engine displacement to 3.2 L for increased power and torque output. The 328 is still considered by some enthusiasts to be one of the most reliable and functional Ferraris; unlike other models, much of its maintenance can be performed without lowering the engine from the vehicle. In 1989, the 328 was succeeded by the 348.

<span class="mw-page-title-main">Ferrari Enzo</span> Italian flagship sports car

The Ferrari Enzo, officially marketed as Enzo Ferrari, is a mid-engine sports car manufactured by Italian automobile manufacturer Ferrari and named after the company's founder, Enzo Ferrari. It was developed in 2002 using Formula One technology, such as a carbon-fibre body, F1-style automated-shift manual transmission, and carbon fibre-reinforced silicon carbide (C/SiC) ceramic composite disc brakes, as well as technologies not allowed in F1, such as active aerodynamics. The Enzo generates substantial amounts of downforce through its front underbody flaps, small adjustable rear spoiler and rear diffuser, which work in conjunction to produce 3,363 newtons (756 lbf) of downforce at 200 km/h (124 mph) and 7,602 newtons (1,709 lbf) of downforce at 300 km/h (186 mph), before decreasing to 5,738 newtons (1,290 lbf) at top speed.

Noble Automotive Ltd, more commonly known simply as Noble, is a British sports car manufacturer based in Leicester. Noble Automotive Ltd. was established in 1999 by Lee Noble in Leeds, West Yorkshire, for producing high-speed sports cars with a rear mid-engine, rear-wheel drive layout. Lee Noble was the chief designer and part owner of Noble. The company was sold in August 2006. He left the company in February 2008 and shortly after announced his new venture, Fenix Automotive in 2009.

<span class="mw-page-title-main">Lancia Stratos</span> Rally racing sports car 1973–1978

The Lancia Stratos HF, known as Lancia Stratos, is a rear mid-engined sports car designed for rallying, made by Italian car manufacturer Lancia. It was a highly successful rally car, winning the World Rally Championship in 1974, 1975 and 1976; and race car winning 1974 Targa Florio, five times the Tour de France Automobile and three editions of Giro d'Italia automobilistico.

<span class="mw-page-title-main">Lancia Thema</span> Motor vehicle

The Lancia Thema is an executive car produced by the Italian automaker Lancia between 1984 and 1994, and one of four cars to share the Type Four platform alongside the Alfa Romeo 164, Fiat Croma and Saab 9000. The Thema was first shown in Turin Motor Show in 1984.

<span class="mw-page-title-main">Ferrari 308 GTB/GTS</span> Motor vehicle

The Ferrari 308 GTB berlinetta and targa topped 308 GTS are V8 mid-engined, two-seater sports cars manufactured by the Italian company Ferrari from 1975 until 1985. The 308 replaced the Dino 246 GT and GTS in 1975 and was updated as the 328 GTB/GTS in 1985. The similar 208 GTB and GTS were equipped with a smaller, initially naturally aspirated and later turbocharged, two-litre engine, and were sold mainly in Italy.

<span class="mw-page-title-main">Ferrari 348</span> V8 sports car manufactured by Italian automobile manufacturer Ferrari as a successor to the 328

The Ferrari 348 is a mid-engine V8-powered 2-seat sports car produced by Italian automaker Ferrari, replacing the 328 in 1989 and remaining in production until 1995. It was the final V8 model developed under the direction of Enzo Ferrari before his death, commissioned to production posthumously.

<span class="mw-page-title-main">Ferrari F40</span> Italian flagship sports car produced from 1987–1992

The Ferrari F40 is a mid-engine, rear-wheel drive sports car engineered by Nicola Materazzi with styling by Pininfarina. It was built from 1987 until 1992, with the LM and GTE race car versions continuing production until 1994 and 1996 respectively. As the successor to the 288 GTO, it was designed to celebrate Ferrari's 40th anniversary and was the last Ferrari automobile personally approved by Enzo Ferrari. At the time it was Ferrari's fastest, most powerful, and most expensive car for sale.

The Ferrari Dino engine is a line of mechanically similar V6 and V8 engines produced by Ferrari for about 40 years from the late 1950s into the early 2000s.

The B Engineering Edonis is a sports car developed in the year 2000 and manufactured by Italian automobile manufacturer B Engineering with overall engineering by Nicola Materazzi and styling by Marc Deschamps.

<span class="mw-page-title-main">VXR</span>

VXR is the branding for the high performance trim specification, used since 2004 for models in many of Vauxhall's car range in the United Kingdom. Holden has also used the VXR badge for some of its high-performance cars such as the Astra VXR, Insignia VXR, and the Commodore VXR.

<span class="mw-page-title-main">Ferrari 126C</span> 1981-1984 Formula One racing car by Ferrari

The Ferrari 126C is the car with which Ferrari raced from the 1981 through the 1984 Formula One season. The team's first attempt at a turbocharged Formula 1 car, it was designed by Mauro Forghieri and Harvey Postlethwaite. The engine chief engineer was Nicola Materazzi.

<span class="mw-page-title-main">Ruf BTR</span> Motor vehicle

The Ruf BTR is a sports car built by German automobile manufacturer Ruf Automobile. The BTR began production in 1983 and was based on the Porsche 911 available in a narrow 911 or optional wide body configuration akin to the 930 Turbo. The BTR was the first Ruf production sports car with a company specific VIN.

<span class="mw-page-title-main">Lancia LC2</span> Series of racing cars by Italian automobile manufacturer Lancia

The Lancia LC2 was a series of racing cars built by Italian automobile manufacturer Lancia and powered by engines built by their sister company Ferrari. They were part of Lancia's official factory-backed effort in the World Sportscar Championship from 1983 to 1986, although they continued to be used by privateer teams until 1991. They were also the company's first car meeting the FIA's new Group C regulations for sports prototypes.

<span class="mw-page-title-main">Ferrari F1/87</span> Formula One racing car

The Ferrari F1/87 is a Formula One racing car used by the Ferrari team during the 1987 Formula One season. The car was driven by Michele Alboreto and Gerhard Berger and replaced the Ferrari F1/86 used in 1986.

<span class="mw-page-title-main">Ferrari 488</span> Mid-engine sports car produced by the Italian automobile manufacturer Ferrari

The Ferrari 488 is a mid-engine sports car produced by the Italian automobile manufacturer Ferrari. The car replaced the 458, being the first mid-engine Ferrari to use a turbocharged V8 since the F40. It was succeeded by the Ferrari F8.

<span class="mw-page-title-main">Ferrari F8</span> V8 sports car produced by Ferrari as a successor to the Ferrari 488

The Ferrari F8 is a mid-engine sports car produced by the Italian automobile manufacturer Ferrari. The car is the successor to the Ferrari 488, with exterior and performance changes. It was unveiled at the 2019 Geneva Motor Show.

<span class="mw-page-title-main">Nicola Materazzi</span> Italian mechanical engineer (1939–2022)

Nicola Materazzi was an Italian mechanical engineer who developed several sports and racing cars, including the Ferrari 288 GTO, Ferrari F40, Bugatti EB110, and B Engineering Edonis. He was one of Italy's leading turbocharging specialists from the mid 1970s, a respected sports car and motorcycle engineer and is sometimes referred to as "Mr F40" or the "father of the F40".

<span class="mw-page-title-main">Ferrari turbocharged V6 F1 engine</span> Reciprocating internal combustion engine

Ferrari made a series of turbocharged, 1.5-litre, V6 racing engines designed for Formula One; between 1981 and 1988. The engine was first used in the Ferrari 126C, in 1981.

The Ferrari 268/282C/308C engine is a twin-turbocharged, 2.6-litre, 2.8-litre, and 3.0-litre, V-8 racing engine, designed, developed and built by Ferrari, for their sister company Lancia, to use in their Lancia LC2 Group C sports prototype race car; between 1983 and 1986. The engine itself is derived from the Dino engine.

References

  1. 1 2 Monticello, Mike (August 2010). "2011 Ferrari 599 GTO". Road & Track . 61 (12): 86.
  2. 1 2 3 4 5 6 7 "GTO". Ferrari official site - Past models. Ferrari S.p.A. Retrieved 14 February 2016.
  3. ↑ Holt, Richard (30 November 2017). "The Ferrari 288 GTO: the car that makes the case for '80s design" . The Telegraph .
  4. ↑ Goodfellow, Winston (2014). Ferrari Hypercars. Beverly: Motorbooks. p. 96. ISBN   978-0760346082. OCLC   871788962.
  5. ↑ Sackey 2013, p. 5.
  6. 1 2 Cironi, Davide (July 21, 2017). "Ferrari F40: The creator Nicola Materazzi tells why Ferrari made it" (Video) – via YouTube.
  7. ↑ Delbo, Massimo (25 August 2022). "Vale Nicola Materazzi: Father of the F40 dies". WhichCar. Retrieved 2023-02-24.
  8. ↑ Cironi, Davide (October 7, 2017). "Materazzi's Memories: Enzo Ferrari and the Turbo in F1". Drive Experience. Archived from the original on 2021-12-19 – via YouTube.
  9. ↑ https://www.ferrari.com/en-EN/magazine/articles/ferrari-colors-rosso-portofino-rosso-corsa-racing-red
  10. ↑ https://supercarnostalgia.com/blog/ferrari-288-gto-chassis-55671
  11. ↑ Rai, Ferrari 288 GTO Michele Alboreto [Ferrari 288 GTO documentary in Italian: Interview with Michele Alboreto] (in Italian), archived from the original on 2021-12-19, retrieved 2020-04-01
  12. 1 2 "1984 Ferrari 288 GTO specifications". Carfolio. March 14, 2013.
  13. ↑ Tegler, Eric (3 October 2018). "Who really benefits from the 25-year import rule?". Autoweek.
  14. ↑ "Road Test: Ferrari GTO". Road & Track . August 1984.
  15. ↑ Egan, Peter (July 1987). "In 1987, The World's Fastest Cars Couldn't Catch A 211-mph Twin-Turbo Ruf". Road & Track .
  16. ↑ "1985 - 1986 Ferrari 288 GTO Evoluzione Specifications". Ultimatecarpage.com.
  17. ↑ D, Nick (April 20, 2016). "1986 Ferrari GTO Evoluzione | Ferrari".
  18. ↑ Day, Lewin (October 17, 2022). "A 1987 Ferrari 288 GTO Evoluzione—Enzo's Final GT Race Car—Can Soon Be Yours". The Drive.
  19. ↑ "Motor1.com Legends: Ferrari 288 GTO Evoluzione". Motor1.com.
  20. ↑ "288 GTO Evo - Index". www.barchetta.cc.
  21. ↑ Burroughs, Mike (September 2013). "One of Five - The Ferrari 288 GTO Evoluzione at the Quail". Stanceworks.
  22. 1 2 Whitcombe, Charis (1 February 2013). "Too Fast to Race – Ferrari 288 GTO Evoluzione". Classic Driver. Photos by Michael Ward.
  23. ↑ "Ferrari 288 GTO Part 2: 288 GTO Evoluzione". QV500.com. Archived from the original on 2008-03-27. Retrieved 2008-12-21.
  24. ↑ Heatley, Tyler (September 25, 2017). "Legends: Ferrari 288 GTO Evoluzione". Motor1 .
  25. ↑ McAleer, Brendan (February 1, 2016). "Niki Lauda, Enzo Ferrari, and the Last 288 GTO". The Drive.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.