The McLaren F1 is a sports car designed and manufactured by British automobile manufacturer McLaren Cars and powered by the BMW S70/2 V12 engine, of which a limited number was produced. The original concept was conceived by Gordon Murray, who successfully convinced Ron Dennis to back the project and hired car designer Peter Stevens to design the exterior and interior of the car. On 31 March 1998, the XP5 prototype with a modified rev limiter set the Guinness World Record for the world's fastest production car, reaching 240.1mph (386.4km/h),[6] surpassing the Jaguar XJ220's 217.1mph (349.4km/h) record from 1992 achieved with an increased rev limit and catalytic converters removed.
The car features numerous proprietary designs and technologies; it is lighter and has a more streamlined structure than many modern sports cars, despite having one seat more than most similar sports cars, with the driver's seat located in the centre (and slightly forward) of two passengers' seating positions, providing driver visibility superior to that of a conventional seating layout. It was conceived as an exercise in creating what its designers hoped would be considered the ultimate road car. Despite not having been designed for use as a race car, a modified racing version of the vehicle won several races, including the 1995 24 Hours of Le Mans. Production began in 1992 and ended in 1998. In all, 100 cars were manufactured, with some variations in the design.[7]
In 1994, the British car magazine Autocar stated in a road test regarding the F1, "The McLaren F1 is the finest driving machine yet built for the public road." They further stated, "The F1 will be remembered as one of the great events in the history of the car, and it may possibly be the fastest production road car the world will ever see."[8] In 2005, Channel 4 placed the car at number one on their list of the 100 greatest cars, calling it "the greatest automotive achievement of all time". In popular culture, the McLaren F1 has earned its spot as 'The greatest automobile ever created' and 'The Most Excellent Sports Car of All Time' amongst a wide variety of car enthusiasts and lovers.[9] Notable past and present McLaren F1 owners include Lewis Hamilton,[10]Elon Musk,[11]Rowan Atkinson,[12]Jay Leno,[13]George Harrison,[14]Ralph Lauren,[15]Nick Mason,[16] and the Sultan of Brunei Hassanal Bolkiah.[17] In the April 2017 issue of Top Gear Magazine, the McLaren F1 was listed as one of the fastest naturally aspirated cars currently available in the world, and in the same league as more modern vehicles such as the Ferrari Enzo and Aston Martin One-77 despite being produced and engineered 10 years prior to the Ferrari Enzo and 17 years prior to the Aston Martin One-77.[18]
Design and conception
The logo of McLaren F1McLaren F1
Chief engineer Gordon Murray's design concept was a common one among designers of high-performance cars: low weight and high power. This was achieved through the use of high-tech and expensive materials such as carbon fibre, titanium, kevlar, magnesium and gold. The F1 was the first production car to use a carbon-fibre monocoque chassis.[19]
The three seat setup inside an F1
Gordon Murray had been thinking of a three-seat sports car since his youth. When Murray was waiting for a flight home from the Italian Grand Prix in 1988, he drew a sketch of a three-seater sports car and proposed it to Ron Dennis. He pitched the idea of creating the ultimate road car, a concept that would be heavily influenced by the company's Formula One experience and technology and thus reflect that skill and knowledge through the McLaren F1.
Murray declared that "During this time, we were able to visit Honda's Tochigi Research Centre with Ayrton Senna. The visit related to the fact that at the time, Honda powered McLaren's F1 Grand Prix chassis. Although it's true I had thought it would have been better to put a larger engine, the moment I drove the Honda NSX, all the benchmark cars—Ferrari, Porsche, Lamborghini—I had been using as references in the development of my car vanished from my mind. Of course, the car we would create, the McLaren F1, needed to be faster than the NSX, but the NSX's ride quality and handling would become our new design target. Being a fan of Honda engines, I later went to Honda's Tochigi Research Centre on two occasions and requested that they consider building for the McLaren F1 a 4.5-litre V10 or V12. I asked, I tried to persuade them, but in the end could not convince them to do it, and the McLaren F1 ended up equipped with a BMW engine."[20]
A pair of Ultima MK3 kit cars, chassis numbers 12 and 13, "Albert" and "Edward", the last two MK3s, were used as "mules" to test various components and concepts before the first cars were built. Number 12 was used to test the gearbox with a 7.4-litre Chevrolet V8, plus various other components such as the seats and the brakes. Number 13 was the test of the V12, plus the exhaust and cooling system. When McLaren was done with the cars they destroyed both of them to keep away the specialist magazines and because they did not want the car to be associated with "kit cars".[21]
The car was first unveiled at a launch show, on 28 May 1992, at The Sporting Club in Monaco. The production version remained the same as the original prototype (XP1) except for the wing mirror which, on the XP1, was mounted at the top of the A-pillar. This car was deemed not road legal as it had no indicators at the front; McLaren was forced to make changes to the car as a result (some cars, including Ralph Lauren's, were sent back to McLaren and fitted with the prototype mirrors). The original wing mirrors also incorporated a pair of indicators which other car manufacturers would adopt several years later.
The car's safety levels were first proved during testing in Namibia in April 1993, when a test driver wearing just shorts and a T-shirt hit a rock and rolled the first prototype car several times, and still managed to escape unscathed. Later in the year, the second prototype (XP2) was specially built for crash testing and passed with the front wheel arch untouched.
Engine
History
The McLaren F1's engine compartment contains the mid-mounted BMW S70/2 engine and uses gold foil as a heat shield in the exhaust compartment
Gordon Murray insisted that the engine for this car be naturally aspirated to increase reliability and driver control. Turbochargers and superchargers increase power but they increase complexity and can decrease reliability as well as introduce an additional aspect of latency and loss of feedback. The ability of the driver to maintain maximum control of the engine is thus compromised. Murray initially approached Honda for a power plant rated at 410kW (550hp; 557PS), with 600mm (23.6in) of block length and a total weight of 250kg (551lb), it was required to be derived from the Formula One power plant in the then-dominating McLaren/Honda cars. When Honda refused, Isuzu, then planning an entry into Formula One, had a 3.5-litre V12 engine being tested in a Lotus chassis. The company was very interested in having the engine fitted into the F1. However, the designers wanted an engine with a proven design and a racing pedigree.[22]
Specifications
Gordon Murray then approached BMW, which took an interest, and the motorsport division BMW M headed by engine expert Paul Rosche[23] designed and built Murray a 6,064cc (6.1L; 370.0cuin) 60º V12 engine called the BMW S70/2. At 461kW (618hp; 627PS)[24] and 266kg (586lb) the BMW engine ended up 14% more powerful and 16kg (35lb) heavier than Gordon Murray's original specifications, with the same block length.
It has an aluminium alloy block and heads, with bore x stroke of 86mm ×87mm (3.39in ×3.43in)DOHC with variable valve timing (a relatively new and unproven technology for the time) for maximum flexibility of control over the 4 valves per cylinder, and a chain drive for the camshafts.
The engine uses a dry sump oil lubrication system. The carbon fibre body panels and monocoque required significant thermal insulation in the engine compartment, so Murray's solution was to line the engine bay with a highly efficient heat-reflector: gold foil. Approximately 16 g (0.56 ounce) of gold was used in each car.[25]
The road version of the engine used a compression ratio of 11:1 to produce a maximum power output of 461kW (618hp; 627PS) at 7,400 rpm and 650N⋅m (479lb⋅ft) of torque at 5,600 rpm.[24] The engine's rev limiter is set at 7,500 rpm. In contrast to raw engine power, a car's power-to-weight ratio is a better method of quantifying acceleration performance than the peak output of the vehicle's power plant. The standard F1 achieves 550hp/ton (403kW/tonne), or just 0.27hp/lb.
The cam carriers, covers, oil sump, dry sump, and housings for the camshaft control are made of magnesium castings. The intake control features twelve individual butterfly valves, and the exhaust system has four Inconel catalysts with individual Lambda-Sondion controls. The camshafts are continuously variable for increased performance, using a system very closely based on BMW's VANOS variable valve timing system for the BMW M3;[26] it is a hydraulically actuated phasing mechanism which retards the inlet cam relative to the exhaust cam at low revs, which reduces the valve overlap and provides for increased idle stability and increased low-speed torque. At higher rpm the valve overlap is increased by computer control to 42 degrees (compare to 25 degrees on the M3)[26] for increased airflow into the cylinders and thus increased performance.
To allow the fuel to atomise fully, the engine uses two Lucas injectors per cylinder, with the first injector located close to the inlet valve – operating at low engine rpm – while the second is located higher up the inlet tract – operating at higher rpm. The dynamic transition between the two devices is controlled by the ECU.[26] Each cylinder has its own miniature ignition coil. The closed-loop fuel injection is sequential. The engine has no knock sensor as the predicted combustion conditions would not cause this to be a problem. The pistons are forged in aluminium.
Every cylinder bore has a Nikasil coating giving it a high degree of wear resistance.[26] From 1998 to 2000, the Le Mans–winning BMW V12 LMR sports car used a similar S70/2 engine. The engine was given a short development time, causing the BMW design team to use only trusted technology from prior design and implementation experience. The engine does not use titanium valves or connecting rods. Variable intake geometry was considered but rejected on grounds of unnecessary complication.[26] As for fuel consumption, the engine achieves on average 15.2 mpg (15 L/100km), at worst 9.3 mpg (25 L/100km) and at best 23.4 mpg (10 L/100km).[8]
It was later revealed that BMW had used an E34 M5 Touring as a test mule in order to test the engine. The existence of such a test mule was revealed when David Clark, the director of McLaren road and race cars from 1994–1998 disclosed this fact to motoring journalist Chris Harris in a podcast. Clark also revealed that the prototype was kept out of the public eye and that BMW is still in possession of the prototype where it has been kept in their top-secret prototype storage facility.[27]
Chassis and body
McLaren F1 with all user accessible compartments opened
The McLaren F1 was an early example of a production road car using a complete carbon fibre reinforced polymer (CFRP) monocoque chassis structure. Aluminium and magnesium were used for attachment points for the suspension system, inserted directly into the CFRP.[28]
The car features a central driving position – the driver's seat is located in the middle, ahead of the fuel tank and ahead of the engine, with a passenger seat slightly behind and on each side.[29] The vehicle doors move up and out when opened and are thus of the butterfly or dihedral type. Gordon Murray's design for the doors was inspired by the Toyota Sera.[30]
The engine produces high temperatures under full application and thus causes a high temperature variation in the engine bay from no operation to normal and full operation. CFRP becomes mechanically stressed over time from high heat transfer effects and thus the engine bay was not constructed from CFRP.[31]
Aerodynamics
The overall drag coefficient on the standard McLaren F1 is Cd=0.32,[32] compared with Cd=0.36 for the faster Bugatti Veyron, and Cd=0.357 for the SSC Ultimate Aero TT, which was the fastest production car from 2007 to 2010. The vehicle's frontal area is CdA=1.79 square metres (19.3sqft) and the S·Cd figure is 0.57. Because the McLaren F1 features active aerodynamics[25][33] these are the figures presented in the most streamlined configuration.
The standard McLaren F1 road car features no fixed wing to produce downforce (compare to the LM and GTR editions); however, the overall design of the underbody of the McLaren F1 in addition to a rear diffuser exploits ground effect to improve downforce which is increased through the use of two electric Kevlar fans to further decrease the pressure under the car.[34] A "high downforce mode" can be turned on and off by the driver.[34] At the top of the vehicle, there is an air intake to direct high pressure air to the engine with a low pressure exit point at the top of the very rear.[34] Under each door is a small air intake to provide cooling for the oil tank and some of the electronics.[34] The airflow created by the electric fans not only increases downforce, but the airflow that is created is further exploited through design, by being directed through the engine bay to provide additional cooling for the engine and the ECU.[34] At the front, there are ducts assisted by a Kevlar electric suction fan for cooling the front brakes.[34]
There is a small dynamic rear spoiler on the tail of the vehicle, which will adjust dynamically and automatically attempt to balance the centre of gravity of the car under braking[25] – which will be shifted forward when the brakes are applied. Upon activation of the spoiler, a high pressure zone is created in front of the flap, and this high pressure zone is exploited—two air intakes are revealed upon application that will allow the high pressure airflow to enter ducts that route air to aid in cooling the rear brakes.[34] The spoiler increases the overall drag coefficient from Cd=0.32 to Cd=0.39 and is activated at speeds equal to or above 40mph (64km/h) by brake line pressure.[26]
Suspension
Steve Randle, who was the car's dynamicist, was appointed responsible for the design of the suspension system of the McLaren F1.[26] It was decided that the ride should be comfortable yet performance-oriented, but not as stiff and low as that of a true track machine, as that would imply a reduction in practical use and comfort as well as increasing noise and vibration, which would be a contradictory design choice in relation to the former set premise – the goal of creating the ultimate road car.
From inception, the design of the F1 had a strong focus on weight distribution by extensive manipulation of placement of, among other things, the engine, fuel and driver, allowing for a low polar moment of inertia in yaw. The F1 has 42% of its weight at the front and 58% at the rear,[26] this figure changes less than 1% with the fuel load.
The distance between the mass centroid of the car and the suspension roll centre was designed to be the same front and rear to avoid unwanted weight transfer effects. Computer controlled dynamic suspension was considered but not applied due to the inherent increase in weight, complexity and loss of predictability of the vehicle.
Damper and spring specifications: 90mm (3.5in) bump, 80mm (3.1in) rebound with bounce frequency at 1.41Hz at the front and 1.75Hz at the rear.[26] Despite being sports oriented, these figures imply a soft ride and inherently decrease track performance. As can be seen from the McLaren F1 LM and the McLaren F1 GTR track variants, the track performance potential is much higher than that in the standard F1 road car due to the fact that the car should be comfortable and usable in everyday conditions.
The suspension is a double wishbone system with an unusual design. Longitudinal wheel compliance is included without loss of wheel control, which allows the wheel to travel backwards when it hits a bump – increasing the comfort of the ride.
Caster wind-off at the front during braking is handled by McLaren's proprietary Ground Plane Shear Centre – the wishbones on either side in the subframe are fixed in rigid plane bearings and connected to the body by four independent bushings which are 25 times more stiff radially than axially.[26] This solution provides for a caster wind-off measured to 1.02 degrees per g of braking deceleration. Compare the Honda NSX at 2.91 degrees per g, the Porsche 928 S at 3.60 degrees per g and the Jaguar XJ6 at 4.30 degrees per g respectively. The difference in toe and camber values is also very small under lateral force application. The Inclined Shear Axis is used at the rear of the machine and provides measurements of 0.04 degrees per g of change in toe-in under braking and 0.08 degrees per g of toe-out under traction.[26]
When developing the suspension system, the facility of electro-hydraulic kinematics and compliance at AB Dynamics was employed to measure the performance of the suspension on a Jaguar XJR16, a Porsche 928 S and a Honda NSX to use as references.
Steering knuckles and the top wishbone/bell crank are also specially manufactured in an aluminium alloy. The wishbones are machined from a solid aluminium alloy with CNC machines.[26]
Tyres
The McLaren F1 uses 235/45ZR17 front tyres and 315/45ZR17 rear tyres. These are specially designed and developed solely for the McLaren F1 by Goodyear, Michelin, Avon and Pirelli. The tyres are mounted on 17 by 9in (431.8 by 228.6mm) front, and 17 by 11.5in (431.8 by 292.1mm) rear five-spoke cast magnesium wheels, coated with a protective paint and secured by magnesium retention pins.[29]
The turning circle from kerb to kerb is 13m (42.7ft), allowing the driver 2.8 turns[35] from lock to lock.
Brakes
The F1 features unassisted, vented and cross-drilled brake discs made by Brembo. The Front size is 332mm (13.1in) and the rear 305mm (12.0in).[26] The calipers are all four-pot, opposed piston types, and are made of aluminium.[26] The rear brake calipers do not feature any handbrake functionality, however there is a mechanically actuated, fist-type calipers which is computer controlled and thus serve as a handbrake.
To increase caliper stiffness, the calipers are machined from a single solid piece of metal (in contrast to the more common being bolted together from two halves). Pedal travel is slightly over one inch. Activation of the rear spoiler will allow the air pressure generated at the back of the vehicle to force air into the cooling ducts located at either end of the spoiler which become uncovered upon application of it.
Servo-assisted ABS brakes were ruled out as they would imply increased mass, complexity and reduced brake feel; however, at the cost of increasing the required skill of the driver.[26]
Gordon Murray attempted to utilise carbon brakes for the F1, but found the technology to be not advanced enough at the time;[31] with one of the major culprits being that of a proportional relationship between brake disc temperature and friction—i.e. stopping power—thus resulting in relatively poor brake performance without an initial warm-up of the brakes before use.[36] Since carbon brakes have a more simplified application envelope in pure racing environments, this allows for the racing edition of the car, the F1 GTR, to feature ceramic carbon brakes.[23]
Gearbox and powertrain
The standard McLaren F1 has a transverse 6-speed manual gearbox with an AP carbon triple-plate clutch contained in an aluminium housing. The gearbox was developed in collaboration with Weismann transmissions in California.[37] The second generation GTR edition has a magnesium housing.[23] Both the standard edition and the 'McLaren F1 LM' have the following gear ratios: 3.23:1, 2.19:1, 1.71:1, 1.39:1, 1.16:1, 0.93:1, with a final drive of 2.37:1, although the final gear is offset from the side of the clutch. The Torsen Limited Slip Differential has a 40% lock. The sixth gear ratio allows for a longer cruise at 53km/h (33mph) per 1000 rpm.[38]
The McLaren F1 has an aluminium flywheel that has only the dimensions and mass absolutely needed to allow the torque from the engine to be transmitted. This is done in order to decrease rotational inertia and increase the responsiveness of the drivetrain, resulting in faster gear changes and better throttle feedback. This is possible due to the F1 engine lacking secondary vibrational couples and featuring a torsional vibration damper by BMW.[26]
Interior and equipment
1996 McLaren F1 side luggage compartment
Standard equipment for the McLaren F1 includes full cabin air conditioning, a rarity on most sports cars and a system design which Murray again credited to the Honda NSX, a car he had owned and driven himself for 7 years without ever needing to change the AC automatic setting.[citation needed] Further comfort features included SeKurit electric defrost/demist windscreen and side glass, electric window lifts, remote central locking, Kenwood 10-disc CD stereo system, cabin access release for opening panels, cabin storage compartment, four-lamp high performance headlight system, rear fog and reversing lights, courtesy lights in all compartments, map reading lights and a gold-plated Facom titanium tool kit and first aid kit (both stored in the car).[39] In addition, tailored, proprietary luggage bags specially designed to fit the vehicle's carpeted storage compartments, including a tailored golf bag, were standard equipment.[29] Airbags are not present in the car.[8][23] Each customer was given a special edition TAG Heuer 6000 Chronometer wristwatch with its serial number scripted below the centre stem.[40]
All features of the F1 were, according to Gordon Murray, obsessed over, including the interior.[31] The metal plates fitted to improve the aesthetics of the cockpit are claimed to be 20 thousandths of an inch (0.5mm) thick to save weight.[31] The driver's seat of the McLaren F1 is custom fitted to the specifications desired by the customer for optimal fit and comfort; the seats are handmade from CFRP and covered in light Connolly leather.[29] By design, the F1 steering column cannot be adjusted; however, prior to production each customer specifies the exact preferred position of the steering wheel and thus the steering column is tailored by default to those owner settings. The same holds true for the pedals, which are not adjustable after the car has left the factory but are tailored to each specific customer.[8]
During its pre-production stage, McLaren commissioned Kenwood, the team's supplier of radio equipment, to create a lightweight car audio system for the car; Kenwood, between 1992 and 1998 used the F1 to promote its products in print advertisements, calendars and brochure covers. Each car's audio system was specially designed to tailor to an individual's listening taste; however, radio was omitted because Murray felt it wasn't necessary.[41]
Purchase and maintenance
Only 106 cars were manufactured: 5 prototypes (XP1, XP2, XP3, XP4, XP5), 64 road versions (F1), 1 tuned developmental prototype (XP1 LM), 5 tuned versions (LM), 1 longtail developmental prototype (XPGT), 2 longtail versions (GT), and 28 racecars (GTR). Production began in 1992 and ended in 1998.[7] At the time of production, each car took around three and a half months to make.[8]
Although production stopped in 1998, McLaren still maintains an extensive support and service network for the F1. Every standard F1 has a modem which allows customer care to remotely fetch information from the ECU of the car in order to assist the customer in the event of a mechanical vehicle failure.[42] There are eight[43] authorised service centres throughout the world, and McLaren will on occasion fly a specialised technician to the owner of the car or the service centre. All of the technicians have undergone dedicated training in service of the McLaren F1. In cases where major structural damage has occurred, the car can be returned to McLaren directly for repair.[43]
However, all of the higher top speed machines use forced induction to reach their respective top speeds, whereas the McLaren F1 is naturally aspirated. To date the F1 holds the record for fastest naturally aspirated production car, a record it has held for almost 30 years.
Millbrook Proving Ground in Bedfordshire, 2-mile (3.2km) banked circuit, top speed test: An average speed of 195.3mph (314.3km/h), with a maximum speed of 200.8mph (323.2km/h) (driven by Tiff Needell using the XP5 prototype).[48]
MIRA Proving Ground, 2.82-mile (4.54km) banked circuit, top speed test: An average speed of 168mph (270km/h), with a maximum speed of 196.2mph (315.8km/h) (driven by Peter Taylor).[48]
Bedford Autodrome West Circuit Post 2006 Hot Lap: 1:21.20 done by Evo magazine with a custom modified McLaren F1 (with the same tyres as the Enzo) on 10 January 2007 which was faster than the Ferrari Enzo lap time of 1:21.30[49]
Estoril circuit lap is 1:55.9 in 1994 (4.36km) configuration of the track with 3 people on board in July 1994.[50][51]
The 1st lap of Nurburgring was completed by Jonathan Palmer in the XP4 prototype, where he reached a maximum of 200mph (322km/h) on the track.[52]
Record claims
In August 1993, McLaren tested the XP3 prototype – which was limited to 433kW (581hp; 589PS) – at the Nardò Ring. They calculated a top speed of 231mph (372km/h) from the data recording inside the car.[53]
The British magazine Autocar was given access and tested the XP5 prototype in May 1994. They wrote: "Had we enough tarmac, we have no doubt that it would finally stop accelerating at its rev-limiter in top which, taking tyre growth into account, would be somewhere the far side of 230mph (370km/h)."[46]
Car and Driver wrote in their August 1994 issue ("Courtesy of Autocar & Motor" written in the box with performance numbers): "Top speed? The F1 runs into the 7,500 rpm redline in sixth at 221mph (356km/h) but it's still accelerating. Gordon Murray, the F1's designer, is convinced that with taller gearing, the car is capable of at least 230mph (370km/h)."[35]
On 31 March 1998, Andy Wallace drove the five-year-old XP5 prototype at Volkswagen's test track in Ehra-Lessien, setting a new production car world record. The record consisted of an independently measured 240.1mph (386.4km/h) two-way average (peak speed 243mph (391km/h) measured by McLaren)[54] with the rev-limiter raised to 8,300 rpm.[55]
As of 2022, the F1 remains the fastest naturally aspirated production car in the world, a record that has been held for 24 years. Although its speed record has been passed, the cars that have surpassed it use forced induction engines.[56]
Following its initial launch as a road car, motorsports teams convinced McLaren to build racing versions of the F1 to compete in international series. Three different versions of the race car were developed from 1995 to 1997.[57]
Some of the F1 GTRs, after the cars were no longer eligible for international racing series, were converted to street use. By adding mufflers, and passenger seats, adjusting the suspension for more ground clearance for public streets, and removing the air-restrictors, the cars were able to be registered for road use.
F1 GTR 1995
A 1995-spec F1 GTR, chassis #006R at the Goodwood Festival of Speed sporting the famous 'Harrods' livery
Built at the request of race teams, such as those owned by Ray Bellm and Thomas Bscher, in order to compete in the BPR Global GT Series, the McLaren F1 GTR was a custom-built race car which introduced a modified engine management system that increased power output – however, air-restrictors mandated by racing regulations reduced the power back to 441kW (591hp; 600PS) at 7,500rpm.[58] The car's list of modifications included changes to body panels, suspension, aerodynamics and the interior. The F1 GTR would go on to take its greatest achievement with first, third, fourth, fifth, and 13th places in the 1995 24 Hours of Le Mans, beating out custom built prototype sports cars. When Mark Blundell – who finished fourth in the race – was asked what the F1 GTR was like to drive during the wet race, he said: "Well it was never designed to be a race car so in many respects it wasn't the best-balanced car in the world. The saving grace of the car was the BMW V12 engine. It was incredibly impressive in that you could be in 6th gear at 2,000 rpm and the thing would just pull like a train. And in the wet that is great as you can run a higher gear and it cuts out some of that traction issue. But in terms of balance, overall it was always a bit top heavy, so the centre of gravity wasn’t ideal. And aerodynamically it wasn't quite there, but it did the job".[59]
In total, nine F1 GTRs were built for the 1995 season.[58]
The 1995 F1 GTR created so much downforce that it was claimed to be able to drive upside down along a ceiling at 100mph (161km/h).[60]
F1 GTR 1996
A 1996-spec F1 GTR, chassis #015R at the Brands Hatch circuit
To follow up on the success of the F1 GTR in 1996, McLaren further developed the 1995 model, leading to a size increase but a weight decrease. Nine more F1 GTRs were built to 1996 spec, while some 1995 cars were still campaigned by privateers. F1 GTR 1996 chassis #14R is notable as being the first non-Japanese car to win a race in the All-Japan Grand Touring Car Championship (JGTC).[61] The car was driven by David Brabham and John Nielsen. The weight was reduced to around 37kg (82lb) from the 1995 GTR but the engine was kept de-tuned at 447kW (599hp; 608PS) to comply with racing regulations.[62]
F1 GTR 1997
A 1997-spec F1 GTR "Long Tail", chassis #027R of Parabolica Motorsports during an FIA GT Championship event
With three F1 GT homologation street versions produced, McLaren could now develop the F1 GTR for the 1997 season. Weight was further reduced and a sequential gearbox was added. The engine was slightly destroked to 6.0L instead of the previous 6.1L. Due to the heavily modified bodywork, the F1 GTR 1997 is often referred to as the "Longtail" thanks to the rear bodywork being extended to increase downforce. A total of ten F1 GTRs were built for the 1997 season. The weight was reduced to a total of 910kg (2,006lb).
Variants
Total production
Variant
Road
Prototype
Race
Total
F1
62
5
67
F1 LM
5
1
6
F1 GT
2
1
3
F1 HDK
2
2
F1 GTR
28
28
Total
71
7
28
106
The McLaren F1 road car, of which 64 were originally sold, saw several different modifications over its production span which were badged as different models. The company maintains a database to match up prospective sellers and buyers of the cars.
Prototypes
McLaren XP3 prototype, photographed during testing in 1993. The car was owned by Gordon Murray.Notice the fog lights integrated in the front bumper and narrower turn signals than the production version along with the wing mirrors sourced from a Citroën CX. The fog lights were removed and the wing mirrors were later replaced by production units.A McLaren F1 with the wing mirrors mounted on the A-pillar as on the prototypes
Prior to the sale of the first McLaren F1s, five prototypes were built, carrying the numbers XP1 through XP5.[63] These cars carried minor subtle differences between each other as well as between the production road cars. Contrary to common misunderstanding, XP1, the first ever running prototype, was never publicly unveiled. The XP1 was never painted (with a bare carbon fibre exterior) and was later destroyed in an accident in Namibia. The car unveiled at the Monaco 1992 event was actually a "Clinic Model", aesthetically convincing but without a powertrain. XP2 was used for crash testing (sporting a blue colour during the test) and also destroyed. As it was a crash test car, it didn't have full interior equipment or a powertrain. XP3 did durability testing, XP4 stress tested the gearbox system and XP5 was a publicity car. The XP3 used to be owned by Gordon Murray before being sold to a private buyer.[64] XP4 was seen by viewers of Top Gear when reviewed by Tiff Needell in the mid-1990s and later on sold to a private owner, while XP5 went on to be used in McLaren's famous top speed run and is still owned by McLaren.
Ameritech
Seven McLaren F1s were imported by Ameritech and modified in order to be federalized for road use in the United States. These modifications include the deletion of side seats, the replacement of headlights, a heightened bumper and dampened performance figures including handling and braking compared to the European F1, due to road legality issues. It weighs in at 1,288.2kg (2,840lb).
Performance
Performance figures are lower than a regular F1 in all aspects (apart from 0–30mph (0–48km/h)) relating to performance. As Mario Andretti noted in a top speed comparison test after hitting the rev limiter at 217.7mph (350.4km/h) on Ameritech F1, the Ameritech F1 is fully capable of pulling a seventh gear, thus with a higher gear ratio or a seventh gear the car would probably be able to reach an even greater top speed.[65]
The weight was reduced by approximately 76kg (167.6lb) to a total of 1,062kg (2,341lb) – achieved by having no interior noise suppression, no audio system, a stripped-down base interior, no fan-assisted ground effect and no dynamic rear wing. The car also had a different transaxle, various aerodynamic modifications, specially designed 18in (457.2mm) magnesium alloy wheels and an upgraded gearbox. The F1 LM used the same engine as the 1995 F1 GTR, but without race-mandated restrictors, to produce 500kW (671hp; 680PS). It had a top speed of 225mph (362km/h), which is less than the standard version because of added aerodynamic drag, despite identical gear ratios. In the place of the small dynamic rear wing there is a considerably larger, fixed CFRP rear wing mounted on the back of the vehicle.
The LM has the following specifications:
Peak torque of 705N⋅m (520lbf⋅ft) at 4,500rpm
Peak power of 500kW (671hp; 680PS) at 7,800rpm
A redline at 8,500rpm
Total weight of 1,062kg (2,341lb) which gives the car an 82.15kW (110hp; 112PS) per litre ratio.[67]
While McLaren has never claimed specific acceleration figures for the LM, Motor Trend recorded traction-limited times of 0–60mph in 3.9 seconds and 0–100mph in 6.7 seconds.[60] The LM was once the holder of the 0–100–0mph record, which it completed in 11.5seconds when driven by Andy Wallace at the disused airbase RAF Alconbury in Cambridgeshire.[68]
The F1 LMs can be identified by their Papaya Orange paint. They were painted in this colour in memory of, and tribute to, Bruce McLaren, whose race colour was Papaya Orange. Two of the chassis were painted in Black with Grey trim similar to the Ueno Clinic sponsored Le Mans 24 Hours winning car. These cars were bought by the Sultan of Brunei and, as such, also feature horizontal stripes down the sides in yellow, red and blue.[69]
Although only five F1 LMs were sold, a sixth chassis exists in the form of XP1 LM, the prototype for modifications to the existing F1 to form the new F1 LM. This car is also painted Papaya Orange and is retained by McLaren.
F1 High Downforce Kit (HDK)
McLaren F1 HDK chassis number 14
Two standard F1s were upgraded to "LM specification". These have chassis numbers 073 and 018. The engines were upgraded to unrestricted GTR specification resulting in a power output of 500kW (671hp; 680PS) and had the High Downforce Kit (HDK) added to them. Their interiors were made more comfortable over the F1 LM. The car having chassis number 018 had upgrades to the air conditioning units, the headlamps changed to a gas discharge type and the steering wheel changed to a 14-inch unit. Moreover, race specification dampers and springs set to the softest settings for comfortable road use were added. 18-inch GTR wheels were used instead of the standard 17-inch and the tyres used are Michelin Pilot Sport units.[70][71]
F1 GT
Motor vehicle
McLaren F1 GT
The McLaren F1 GT developmental prototype (chassis #056XP) at the 2015 Geneva Motor Show
The final and rarest incarnation of the road car, the F1 GT was meant as a homologation special. With increased competition from homologated sports cars from Porsche and Mercedes-Benz in the former BPR Global GT Series and the new FIA GT Championship, McLaren required extensive modification to the F1 GTR in order to remain competitive. These modifications were so vast that McLaren would be required to build a production road-legal car on which the new race cars would be based.
The F1 GT featured the same extended rear bodywork as the GTRs for increased downforce and reduced drag yet lacked the rear wing that had been seen on the F1 LM.[73] The downforce generated by the longer tail was found to be sufficient to not require the wing. The front end was also similar to the racing car, with extra louvers and the wheel arches widened to fit larger wheels. The interior was modified, and a racing steering wheel was included in place of the standard unit.
The F1 GTs were built from standard F1 road car chassis, retaining their production numbers. The developmental prototype GT, known as XPGT, was F1 chassis #056XP, was painted dark green ("Silverstone green") and is owned by a private collector in Switzerland. The company technically only needed to build one car and did not even have to sell it. However, demand from customers drove McLaren to build two production versions that were sold- the customer F1 GTs were chassis #054 and #058. #054 was painted black and is owned by the Sultan of BruneiHassanal Bolkiah, while #058 was painted burgundy and is owned by the ZAZ Museum in Japan.[74] It weighs 1,120kg (2,469lb), 20kg (44lb) lighter than the standard F1 and has a top speed of over 240mph (386km/h), although this was never tested.[citation needed]
The Nissan Skyline GT-R is a Japanese sports car based on the Nissan Skyline range. The first cars named "Skyline GT-R" were produced between 1969 and 1972 under the model code KPGC10, and were successful in Japanese touring car racing events. This model was followed by a brief production run of second-generation cars, under model code KPGC110, in 1973.
The BMW M70 is a naturally-aspirated, SOHC, V12 petrol engine, which was BMW's first production V12 and was produced from 1987 to 1996. It was also the first German 12-cylinder post-war automobile engine, predating Mercedes-Benz's M120 by four years and VAG's W12 by fourteen.
The BMW M3 is a high-performance version of the BMW 3 Series, developed by BMW's in-house motorsport division, BMW M GmbH. M3 models have been produced for every generation of 3 Series since the E30 M3 was introduced in 1986.
The Porsche 911 GT1 is a car designed and developed by German automobile manufacturer Porsche AG to compete in the GT1 class of sportscar racing, which also required a street-legal version for homologation purposes. The limited-production street-legal version developed as a result was named the 911 GT1 Straßenversion.
Ultima Sports Ltd. is an English sports car manufacturer based in Hinckley, Leicestershire.
The 1995 24 Hours of Le Mans was the 63rd Grand Prix of Endurance, and took place on 17 and 18 June 1995 in one of the wettest races in the event's history with about 17 hours of steady rain. The race was won by the #59 McLaren F1 GTR driven by JJ Lehto, Yannick Dalmas and Masanori Sekiya entered in the GT1 category. This was the first Le Mans win for a driver from Finland and for a driver from Japan. It was also McLaren's first win, at its first attempt - Ferrari had accomplished the same feat with its two cars in 1949, but other manufacturers like Jaguar, Porsche, Ford or Audi achieved their first Le Mans win only after 2, 3 or more attempts. As well as its outright win, the strength of the F1 GTR in the race was underlined by it ultimately filling four of the first five places.
The Mercedes-Benz CLK GTR is a GT1 sports car built and produced by Mercedes-Benz in conjunction with their then motorsport partner AMG. Intended for racing in the new FIA GT Championship series in 1997, the CLK GTR was designed primarily as a race car. As such, the production of road cars necessary in order to meet homologation standards of GT1 was a secondary consideration in the car's design, i.e. the CLK GTR was a homologation special.
The McLaren F1 GTR is the racing variant of the McLaren F1 sports car first produced in 1995 for grand touring style racing, such as the BPR Global GT Series, FIA GT Championship, JGTC, and British GT Championship. It was powered by the naturally aspirated BMW S70/2 V12 engine. It is most famous for its overall victory at the 1995 24 Hours of Le Mans where it won against faster purpose-built prototypes in very wet conditions. The F1 GTR raced internationally until 2005 when the final race chassis was retired.
The BMW V12 LM was a racing car built for sports car racing in 1998. The car was built using a combination of WilliamsF1 chassis engineering and construction and a BMW powerplant. The car was a predecessor to the BMW V12 LMR, which debuted in 1999.
The McLaren MP4-12C, later rebranded as the McLaren 12C, is a sports car produced by the British carmaker McLaren Automotive. Manufactured between 2011 and 2014 and designed by Frank Stephenson, the MP4-12C was available as both a coupe and a retractable hard-top convertible, the latter known as the "Spider".
Lanzante Limited is a British automotive company specializing in servicing, restoring and developing unique vehicles, while also participating in auto racing in both modern and historic guises under the title of Lanzante Motorsport.
The McLaren P1 is a flagship sports car produced by British marque McLaren Automotive. Styled by American car designer Frank Stephenson, it is the second installment in McLaren's Ultimate Series after the McLaren F1. Considered to be the spiritual successor to the F1, the P1 was one of the first high performance sports cars to be introduced incorporating hybrid technology; the Porsche 918 Spyder having begun taking orders prior to the P1 and the LaFerrari introduced alongside it. First shown as a concept on the 20th anniversary of the F1 at the 2012 Paris Motor Show, the P1 made its debut at the 2013 Geneva International Motor Show.
The McLaren 650S is a British sports car designed and manufactured by British automobile manufacturer McLaren Automotive. It was announced in February 2014 as a new model, but based on the existing MP4-12C with 25% new parts, and was formally unveiled at the 2014 Geneva Motor Show.
The McLaren 570S is a sports car designed and manufactured by the British car manufacturer McLaren Automotive, produced from 2015 until 2021. It was unveiled at the 2015 New York International Auto Show.
The BMW E31 is the first generation of the BMW 8 Series. It is a grand tourer built by BMW from 1990 to 1999 as a 2-door coupé, powered by either a V8 or V12 engine. Whilst it did supplant the original E24 based 6 Series in 1990, it was not a direct successor, but a new model class with a substantially higher price and performance than the 6 Series.
The McLaren 720S is a sports car designed and manufactured by British automobile manufacturer McLaren Automotive. It is the second all-new car in the McLaren Super Series, replacing the 650S beginning in May 2017.
The McLaren Senna is a limited-production mid-engined sports car manufactured by McLaren Automotive. The car is the third addition in the McLaren Ultimate Series, joining the F1 and the P1; however, it is not a direct successor to either of the cars. The Senna was unveiled online by the company on 10 December 2017, with the official unveiling taking place at the 2018 Geneva Motor Show.
The Pagani Zonda R is a track day car developed and manufactured by Italian sports car manufacturer Pagani. It debuted at the 2007 Geneva Motor Show, using the 6.0-litre GT 112 engine sourced from the racing version of the Mercedes-Benz CLK-GTR. The Zonda R's competition lies with track-based cars, such as the Ferrari FXX and Maserati MC12 Corse rather than the original Zonda's road competitors as it is not road-legal.
The Gordon Murray Automotive Type 50 or GMA T.50 is a sports car manufactured by Gordon Murray Automotive. Designed by Gordon Murray and inspired by the McLaren F1, the T.50 is powered by an all-new 3,994 cc (4.0 L) naturally aspirated V12 engine developed by Cosworth. The engine is rated at 663 PS at 11,500 rpm with a maximum torque of 467 N⋅m (344 lbf⋅ft) at 9,000 rpm.
The McLaren Artura is a hybrid electric sports car designed and manufactured by the British car manufacturer McLaren Automotive since 2022. It is the third hybrid by the company since the P1 and Speedtail, and the first with a V6 engine.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
