Door phone

Last updated
Outdoor phone plate at the building's entrance Interfone.JPG
Outdoor phone plate at the building's entrance
Outdoor phone plate with camera at video door phone Domofon Dom.Ru.jpg
Outdoor phone plate with camera at video door phone

A door phone or door bell phone is a set of electrical and electronic elements used to handle communication between a resident in a house, apartment or villa and a guest outside. The device can also lock or unlock the door it has been configured to work with. Door phones have been used across a variety of commercial and residential buildings. For example, offices and apartment blocks both make frequent use of door phones. They are so widely used that, nowadays, they form part of the standard electrical installation of most buildings. [1]

Contents

The simplest version is an intercom that establishes a communication between an entryway at street level and a resident inside the house. A loudspeaker installed at the street level entrance allows a building resident to speak to their visitor. In buildings where there are more than one door phone plate located outside of a building's entrance, each door phone has a certain number of buttons depending on the number of units in each building.

Operation

Modern outdoor phone plate with a push buttons matrix Enireja butonara pordotelefono (1536 x 1152).jpg
Modern outdoor phone plate with a push buttons matrix

A door phone in its most basic version is a two-way intercom allowing communication from the street to the inside of a building. More complex door phones are connected to electric strikes, and can unlock and open the door to allow access to the interior of the building. [1]

The part of the door phone on the exterior of a building is known as the door phone plate. It is located at the outside of the entrance of each building. Door phone plates consist of a matrix of buttons. each of them drive a buzzer located in a unit inside each apartment building. Each apartment building contains a button that can activate the electric strike.

There are several installation systems, the most traditional being a system known as 4 + 1, named for the types of wiring that it requires. A 4 + 1 system requires four wires that handle power, communication, and the door system, and another wire for communication between an in-unit apartment resident and the person using the door phone.

Video door phones

Video door phone indoor terminal. Interphone.jpg
Video door phone indoor terminal.

Going a little further in time, we find video door phones featuring a video installation apart from the classical audio. In these cases, the intercom plate has the same structure as the previous version but features a video monitor connected to a surveillance camera that allows inspecting the person who pressed the button and part of the surrounding area. [2]

Access control systems. Some manufacturers have also adopted the possibility of opening the door via a keyboard. By introducing a numerical secret code the electric strike is operated. Although there is also the possibility of being used as an access control with either a magnetic card or a smart card. [3]

Wiring topology

Among other classifications there is one with three different types of door phones that differ mainly in the number of wires required in their installation, having some parallelism between different manufacturers, that use different communication protocols but a similar wiring topology:

See also

Related Research Articles

<span class="mw-page-title-main">Demarcation point</span> Boundary of a private and public network

In telephony, the demarcation point is the point at which the public switched telephone network ends and connects with the customer's on-premises wiring. It is the dividing line which determines who is responsible for installation and maintenance of wiring and equipment—customer/subscriber, or telephone company/provider. The demarcation point varies between countries and has changed over time.

A distribution board is a component of an electricity supply system that divides an electrical power feed into subsidiary circuits while providing a protective fuse or circuit breaker for each circuit in a common enclosure. Normally, a main switch, and in recent boards, one or more residual-current devices (RCDs) or residual current breakers with overcurrent protection (RCBOs) are also incorporated.

<span class="mw-page-title-main">Doorbell</span> Signaling device placed near an entry door to a building

A doorbell is a signaling device typically placed near a door to a building's entrance. When a visitor presses a button, the bell rings inside the building, alerting the occupant to the presence of the visitor. Although the first doorbells were mechanical, activated by pulling a cord connected to a bell, modern doorbells are electric, operated by a pushbutton switch. Modern doorbells often incorporate intercoms and miniature video cameras to increase security.

<span class="mw-page-title-main">Business telephone system</span> Telephone system typically used in business environments

A business telephone system is a telephone system typically used in business environments, encompassing the range of technology from the key telephone system (KTS) to the private branch exchange (PBX).

<span class="mw-page-title-main">Electrical wiring</span> Electrical installation of cabling

Electrical wiring is an electrical installation of cabling and associated devices such as switches, distribution boards, sockets, and light fittings in a structure.

<span class="mw-page-title-main">Security alarm</span> System that detects unauthorised entry

A security alarm is a system designed to detect intrusions, such as unauthorized entry, into a building or other areas, such as a home or school. Security alarms protect against burglary (theft) or property damage, as well as against intruders. Examples include personal systems, neighborhood security alerts, car alarms, and prison alarms.

<span class="mw-page-title-main">Intercom</span> Voice communications system for use within a local area

An intercom, also called an intercommunication device, intercommunicator, or interphone, is a stand-alone voice communications system for use within a building, small collection of buildings or portably within a small coverage area, which functions independently of the public telephone network. Intercoms are generally mounted permanently in buildings and vehicles, but can also be detachable and portable. Intercoms can incorporate connections to public address loudspeaker systems, walkie talkies, telephones, and other intercom systems. Some intercom systems incorporate control of devices such as signal lights and door latches.

<span class="mw-page-title-main">Structured cabling</span> Telecommunications cabling infrastructure

In telecommunications, structured cabling is building or campus cabling infrastructure that consists of a number of standardized smaller elements called subsystems. Structured cabling components include twisted pair and optical cabling, patch panels and patch cables.

<span class="mw-page-title-main">Electronic lock</span> Locking device which operates by means of electric current

An electronic lock is a locking device which operates by means of electric current. Electric locks are sometimes stand-alone with an electronic control assembly mounted directly to the lock. Electric locks may be connected to an access control system, the advantages of which include: key control, where keys can be added and removed without re-keying the lock cylinder; fine access control, where time and place are factors; and transaction logging, where activity is recorded. Electronic locks can also be remotely monitored and controlled, both to lock and to unlock.

<span class="mw-page-title-main">AT&T Merlin</span> Corporate telephone system

AT&T Merlin is a corporate telephone system by American Telephone and Telegraph (AT&T) that was introduced in late 1983, when it was branded American Bell Merlin. After the breakup of AT&T in 1984, it was rebranded and later also supplied by Lucent and Avaya.

<span class="mw-page-title-main">1A2 Key Telephone System</span> Modular business telephone system

The 1A2 Key Telephone System is a business telephone system developed and distributed by the Western Electric Company for the Bell System.

A wireless intercom is a telecommunications device that enables voice communication without the need to run copper wires between intercom stations. A wired intercom system may incorporate wireless elements.

<span class="mw-page-title-main">British telephone socket</span> Type of telephone socket design

British telephone sockets were introduced in their current plug and socket form on 19 November 1981 by British Telecom to allow subscribers to connect their own telephones. The connectors are specified in British Standard BS 6312. Electrical characteristics of the telephone interface are specified by individual network operators, e.g. in British Telecom's SIN 351. Electrical characteristics required of British telephones used to be specified in BS 6305.

<span class="mw-page-title-main">Elevator</span> Vertical transport device

An elevator or lift is a machine that vertically transports people or freight between levels. They are typically powered by electric motors that drive traction cables and counterweight systems such as a hoist, although some pump hydraulic fluid to raise a cylindrical piston like a jack.

BTicino S.p.A. is an Italian metalworking company that operates in the field of electrical low voltage equipment used for residential, employment and production. Bticino proposes solutions for the energy distribution, for the communication and for the control of light, sound, climate and security.

<span class="mw-page-title-main">Electromagnetic lock</span> Door locking device

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate.

A videophone is a telecommunication device that provides both live audio and video on a telephone call, letting each person see as well as talk to the other.

Homes typically have several kinds of home wiring, including electrical wiring for lighting and power distribution, permanently installed and portable appliances, telephone, heating or ventilation system control, and increasingly for home theatre and computer networks.

<span class="mw-page-title-main">Copper conductor</span> Electrical wire or other conductor made of copper

Copper has been used in electrical wiring since the invention of the electromagnet and the telegraph in the 1820s. The invention of the telephone in 1876 created further demand for copper wire as an electrical conductor.

<span class="mw-page-title-main">Video door-phone</span> Stand-alone intercom system

A video door-phone is a stand-alone intercom system used to manage calls made at the entrance to a building with access controlled by audiovisual communication between the inside and outside. The main feature of video door entry is that it enables the person indoors to identify the visitor and, if they wish, engage in conversation and/or open the door to allow access to the person calling.

References

  1. 1 2 Door phones reference manual (in Spanish)
  2. "Video Door Phone System". Archived from the original on 2017-03-09. Retrieved 2015-02-28.
  3. "Access Control". Archived from the original on 2017-03-03. Retrieved 2015-02-28.
  4. door phones 4+n (in Spanish)
  5. Door phones 1+n (in Spanish)
  6. Digital door phones -2 wire (in Spanish)