ESG Solutions

Last updated
ESG Solutions
TypePrivate
Industry Oil services, Mine services
Founded1993
Headquarters Kingston, Ontario, Canada
Area served
Global
Key people
  • David Moore (CEO)
  • Meena Mackie (President)
  • Trevor Pugh (CTO)
ProductsMicroseismic instrumentation and Geophysical services
Website www.esgsolutions.com

ESG Solutions (Engineering Seismology Group or ESG) is a geophysical products and services company specializing in microseismic monitoring. ESG manufactures and installs microseismic instrumentation and performs microseismic data processing and interpretation services. It is headquartered in Kingston, Ontario, Canada, with operations in Calgary, Houston, and Beijing and offices in Brisbane, Surabaya and Dallas. The company was purchased by Deep Imaging in May 2021. Prior to this the company was purchased by FTSE 250 Index constituent, Spectris, in December 2014.

Contents

Microseismic Monitoring

ESG Solutions was founded in 1993 as Engineering Seismology Group Inc. The company performs microseismic monitoring services for the oil and gas, mining and geotechnical industries, but its roots lie in microseismic monitoring for the Canadian mining industry. The group was loosely formed out of the Engineering Seismology Lab at Queen’s University in Kingston, Ontario, Canada that was performing research on a form of seismology called microseismics, or 'passive seismic'.

History

Microseismic science is the study of very small scale earthquakes that are induced by industrial processes such as mining or oil production. In the 1980s, many mines in northern Ontario were experiencing increased seismic activity, including a large rockburst which killed 4 miners in Sudbury in 1984. In response to this accident, a consortium of mining companies was established with government support to develop monitoring systems to acquire seismic waveforms and to study the causes and mechanisms of rockbursts. [1] [2] The research lab led by Professor R. Paul Young at Queen’s University set out to develop instrumentation, software and processing routines to locate the source of microseismic activity in mines, and when the lab disbanded in the early 1990s, ESG’s founders continued this work in a commercial capacity. In December 2014, Spectris plc acquired ESG Solutions. [3] In May 2021, Deep Imaging acquired ESG Solutions. [4]

Retsof Salt Mine, New York

ESG's first permanent seismic system installation took place at the Retsof Salt Mine in the Genesee Valley near Retsof, New York. In 1994, the Retsof Salt Mine was the largest salt mine in North America, and the second largest in the world. Mining activities had caused the collapse of a 500 by 500 foot piece of the mine ceiling at a depth of 1,200 feet below the surface. The collapse of the shale ceiling rock compromised the caprock layer separating the mine from overlying ground water, and the mine began to flood. The failure caused a magnitude 3.6 earthquake that was felt on the surface, as well as release of natural gases, declining aquifer levels and surface subsidence. [5] An ESG seismic system was installed using boreholes and surface-based sensors to evaluate the integrity of the mine as it flooded and track the sinkhole generated at the surface.

Cotton Valley Consortium

ESG began applying the knowledge gained from work in the mining industry to the oil and gas sector. ESG monitored well stimulations using microseismic instrumentation to define event locations and source mechanisms and analyzed microseismicity associated with compaction in the North Sea Ekofisk and Valhall fields. [6] In 1997, ESG pioneered the use of microseismic analysis in shale gas extraction by providing geometric and fracture growth characteristics for hydraulic fracture stimulations in the Cotton Valley fields in East Texas for Union Pacific Resources (UPR), a member of the Cotton Valley Hydraulic Fracture Imaging Consortium Project. [7] The Cotton Valley Hydraulic Fracture Project was initiated in order to determine if microseismicity can be used to accurately map fracture geometry and depict hydraulic fracture growth, and be further employed to improve fracture design (fracture models), optimize the number and location of wells (reservoir drainage), and improve on-site production methodologies. Through this work with UPR and the Cotton Valley Consortium, ESG developed its Fracmap service; the petroleum industry’s first viable commercial hydraulic fracture imaging and interpretation service in January 2000.

EOR in Alberta's Oil Sands

Since 2002, ESG has been active in monitoring EOR activities in the heavy oil sands of Western Canada. Microseismic monitoring has proven to be a valuable resource to map steam movement during CSS and SAGD operations, as well as ensuring environmental compliance by mapping containment, caprock integrity and well casing failures. [8]

More Recent Work

In recent years, ESG has been active in providing microseismic monitoring services for hydraulic fracture stimulations throughout North America, including in the Horn River Basin [9] and the Marcellus shale, [10] long-term reservoir monitoring of thermal steam injection operations, permanent monitoring of underground and open-pit mining operations, and CO2 sequestration and gas storage projects.

The company has placed an emphasis on furthering advanced microseismic analysis techniques including seismic moment tensor inversion (SMTI) analysis within the hydraulic fracture market. SMTI evaluates the failure mechanisms of the rock as fractures develop and is used to calculate stimulated reservoir volume (SRV), fracture intensity and complexity and develop discrete fracture networks (DFN). [11]

In 2011, ESG re-entered the realm of wireline microseismic acquisition with the purchase a fleet of trucks and wireline tools to serve the US and Canadian markets. ESG successfully launched its wireline monitoring services by monitoring a 10-stage horizontal hydraulic fracture operation in the southern US, providing around-the-clock microseismic monitoring from three vertical observation wells. [12] Since then, ESG has offered complete microseismic monitoring solutions for hydraulic fracture operations throughout the US and Western Canada.

In 2012, ESG launched a number of new products and services including the Paladin IV microseismic recorder [13] and Mining and Geotechnical Consulting Services. [14]

See also

Related Research Articles

Induced seismicity is typically earthquakes and tremors that are caused by human activity that alters the stresses and strains on Earth's crust. Most induced seismicity is of a low magnitude. A few sites regularly have larger quakes, such as The Geysers geothermal plant in California which averaged two M4 events and 15 M3 events every year from 2004 to 2009. The Human-Induced Earthquake Database (HiQuake) documents all reported cases of induced seismicity proposed on scientific grounds and is the most complete compilation of its kind.

<span class="mw-page-title-main">Kansas Geological Survey</span>

The Kansas Geological Survey (KGS), a research and service division of the University of Kansas, is charged by statute with studying and providing information on the geologic resources of Kansas. The KGS has no regulatory authority and does not take positions on natural resource issues.

Geomechanics is the study of the mechanical state of the earth's crust and the processes occurring in it under the influence of natural physical factors. It involves the study of the mechanics of soil and rock.

<span class="mw-page-title-main">CGG (company)</span> French company

CGG SA (CGG) is a multinational geoscience technology services company that specializes on solving complex natural resource, environmental and infrastructure challenges.

<span class="mw-page-title-main">Rosemanowes Quarry</span> British granite quarry

<span class="mw-page-title-main">Shale gas</span> Natural gas trapped in shale formations

Shale gas is an unconventional natural gas that is found trapped within shale formations. Since the 1990s a combination of horizontal drilling and hydraulic fracturing has made large volumes of shale gas more economical to produce, and some analysts expect that shale gas will greatly expand worldwide energy supply.

<span class="mw-page-title-main">Well stimulation</span>

Well stimulation is a well intervention performed on an oil or gas well to increase production by improving the flow of hydrocarbons from the reservoir into the well bore. It may be done using a well stimulator structure or using off shore ships / drilling vessels, also known as "Well stimulation vessels".

<span class="mw-page-title-main">Shale gas in Canada</span>

The inclusion of unconventional shale gas with conventional gas reserves has caused a sharp increase in estimated recoverable natural gas in Canada. Until the 1990s success of hydraulic fracturing in the Barnett Shales of north Texas, shale gas was classed as "unconventional reserves" and was considered too expensive to recover. There are a number of prospective shale gas deposits in various stages of exploration and exploitation across the country, from British Columbia to Nova Scotia.

Induced seismicity in Basel led to suspension of its hot dry rock enhanced geothermal systems project. A seismic-hazard evaluation was then conducted, resulting in the cancellation of the project in December 2009. Basel, Switzerland sits atop a historically active fault and most of the city was destroyed in a magnitude 6.5 earthquake in 1356. But the Basel project, although it had established an operational approach for addressing induced earthquakes, had not performed a thorough seismic risk assessment before starting geothermal stimulation.

<span class="mw-page-title-main">Fracking</span> Fracturing bedrock by pressurized liquid

Fracking is a well stimulation technique involving the fracturing of bedrock formations by a pressurized liquid. The process involves the high-pressure injection of "fracking fluid" into a wellbore to create cracks in the deep-rock formations through which natural gas, petroleum, and brine will flow more freely. When the hydraulic pressure is removed from the well, small grains of hydraulic fracturing proppants hold the fractures open.

<span class="mw-page-title-main">Fracking in the United Kingdom</span>

Fracking in the United Kingdom started in the late 1970s with fracturing of the conventional oil and gas fields near the North Sea. It was used in about 200 British onshore oil and gas wells from the early 1980s. The technique attracted attention after licences use were awarded for onshore shale gas exploration in 2008. The topic received considerable public debate on environmental grounds, with a 2019 high court ruling ultimately banning the process. The two remaining high-volume fracturing wells were supposed to be plugged and decommissioned in 2022.

<span class="mw-page-title-main">Environmental impact of fracking in the United States</span>

Environmental impact of fracking in the United States has been an issue of public concern, and includes the contamination of ground and surface water, methane emissions, air pollution, migration of gases and fracking chemicals and radionuclides to the surface, the potential mishandling of solid waste, drill cuttings, increased seismicity and associated effects on human and ecosystem health. Research has determined that human health is affected. A number of instances with groundwater contamination have been documented due to well casing failures and illegal disposal practices, including confirmation of chemical, physical, and psychosocial hazards such as pregnancy and birth outcomes, migraine headaches, chronic rhinosinusitis, severe fatigue, asthma exacerbations, and psychological stress. While opponents of water safety regulation claim fracking has never caused any drinking water contamination, adherence to regulation and safety procedures is required to avoid further negative impacts.

<span class="mw-page-title-main">Environmental impact of fracking</span>

The environmental impact of fracking is related to land use and water consumption, air emissions, including methane emissions, brine and fracturing fluid leakage, water contamination, noise pollution, and health. Water and air pollution are the biggest risks to human health from fracking. Research has determined that fracking negatively affects human health and drives climate change.

Shale gas in the United Kingdom has attracted increasing attention since 2007, when unconventional onshore shale gas production was proposed. The first shale gas well in England was drilled in 1875. As of 2013 a number of wells had been drilled, and favourable tax treatment had been offered to shale gas producers.

<span class="mw-page-title-main">Fracking in Canada</span>

Fracking in Canada was first used in Alberta in 1953 to extract hydrocarbons from the giant Pembina oil field, the biggest conventional oil field in Alberta, which would have produced very little oil without fracturing. Since then, over 170,000 oil and gas wells have been fractured in Western Canada. Fracking is a process that stimulates natural gas or oil in wellbores to flow more easily by subjecting hydrocarbon reservoirs to pressure through the injection of fluids or gas at depth causing the rock to fracture or to widen existing cracks.

ShakeAlarm is an on-site earthquake early warning system (EEWS) developed by Weir-Jones Engineering Consultants in Vancouver, British Columbia. The system functions by detecting and identifying fast moving P-waves that arrive before the slower and damaging S-waves generated from the hypocenter of an earthquake. Once ShakeAlarm has identified a candidate P-wave it will determine in less than 500 milliseconds if the following S-wave will be strong enough to be dangerous. Once the determination has been reached that an inbound S-wave might exceed acceptable levels the system can trigger the structured shutdown of critical processes - gas, electricity and water services - and can also be used for opening of fire bay doors, SMS warnings to the general population and a variety of other services to be activated before the S-wave's (shaking) impact. ShakeAlarm represents a streamlined site specific application of technology and ideas that Japan has been working with for some time on a nationwide deployment level in the form of a network.

With the development of both conventional and unconventional resources in Canada, induced seismicity caused by anthropological activities has been observed, documented, and studied.

<span class="mw-page-title-main">CNX Resources</span> US natural gas company

CNX Resources Corporation is a natural gas company based in Pittsburgh with operations in the Appalachian Basin, primarily in the Marcellus Shale and Utica Shale in Pennsylvania, Ohio and West Virginia. It also develops coalbed methane properties in Virginia along with a methane capture and abatement program. The company also has extensive midstream operations and is one of the largest producers of natural gas in the United States.

<span class="mw-page-title-main">Geological engineering</span>

Geological engineering is a discipline of engineering concerned with the application of geological science and engineering principles to fields, such as civil engineering, mining, environmental engineering, and forestry, among others. The work of geological engineers often directs or supports the work of other engineering disciplines such as assessing the suitability of locations for civil engineering, environmental engineering, mining operations, and oil and gas projects by conducting geological, geoenvironmental, geophysical, and geotechnical studies. They are involved with impact studies for facilities and operations that affect surface and subsurface environments. The engineering design input and other recommendations made by geological engineers on these projects will often have a large impact on construction and operations. Geological engineers plan, design, and implement geotechnical, geological, geophysical, hydrogeological, and environmental data acquisition. This ranges from manual ground-based methods to deep drilling, to geochemical sampling, to advanced geophysical techniques and satellite surveying. Geological engineers are also concerned with the analysis of past and future ground behaviour, mapping at all scales, and ground characterization programs for specific engineering requirements. These analyses lead geological engineers to make recommendations and prepare reports which could have major effects on the foundations of construction, mining, and civil engineering projects. Some examples of projects include rock excavation, building foundation consolidation, pressure grouting, hydraulic channel erosion control, slope and fill stabilization, landslide risk assessment, groundwater monitoring, and assessment and remediation of contamination. In addition, geological engineers are included on design teams that develop solutions to surface hazards, groundwater remediation, underground and surface excavation projects, and resource management. Like mining engineers, geological engineers also conduct resource exploration campaigns, mine evaluation and feasibility assessments, and contribute to the ongoing efficiency, sustainability, and safety of active mining projects

References

  1. M. Plouffe; P. Mottahed; D. Lebel; M. Cote (1993). "Monitoring of large mining induced seismic events" (PDF). Rockburst and Seismicity in Mines, Young (ed.). Roterdam: Balkema. ISBN   9054103205. Archived from the original (PDF) on 6 July 2011. Retrieved 21 January 2011.
  2. W.D. Ortlepp. "RaSiM Comes of Age – A Review of the Contribution to the Understanding and Control of Mine Rockbursts" (PDF). Retrieved 21 January 2011.
  3. ESG Solutions. "Spectris plc Announces Acquisition of ESG Solutions" . Retrieved 10 December 2014.
  4. ESG Solutions. "Deep Imaging Acquires ESG Solutions Forming a New Leader in Rock Behaviour Insights" . Retrieved 12 May 2021.
  5. USGS. "Effects of the 1994 Retsof Salt Mine Collapse in the Genesee Valley, New York" (PDF). Retrieved 3 April 2013.
  6. S.C. Maxwell and T.I. Urbancic (2001). "The role of passive microseismic monitoring in the instrumented oil field." The Leading Edge (20): 636-639.
  7. T.I. Urbancic and R. J. Zinno (1998). "Cotton Valley Hydraulic Fracture Imaging Project: Feasibility of determining fracture behavior using microseismic event locations and source parameters. SEG Expanded Abstracts. (17): 964-967
  8. P.McGillivray (2005). "Microseismic and Time-lapse Seismic Monitoring of a Heavy Oil Extraction Process at Peace River, Canada" (PDF). CSEG Recorder (30) 5:9. Archived from the original (PDF) on 20 July 2011. Retrieved 26 January 2011.
  9. ESG Solutions. "ESG Solutions Completes Large-Scale Microseismic Hydraulic Fracture Monitoring Program for Nexen Inc" . Retrieved 11 January 2011.
  10. WikiMarcellus. "ESG Solutions" . Retrieved 26 January 2011.
  11. A. Baig and T. Urbancic (2010). "Microseismic moment tensors; a path to understanding frac growth." The Leading Edge. 29(3): 320-324
  12. ESG Solutions. "ESG Offers Wireline Acquisition Services to the US Frac Market" . Retrieved 17 July 2012.
  13. ESG Solutions. "ESG Solutions Introduces Latest Innovation in Microseismic Signal Acquisition" . Retrieved 17 July 2012.
  14. ESG Solutions. "ESG Solutions Offers Microseismic Consulting Services to the Mining and Geotechnical Industries" . Retrieved 17 July 2012.