Emulsifying wax

Last updated

Emulsifying wax is a cosmetic emulsifying ingredient. The ingredient name is often followed by the initials NF, indicating that it conforms to the specifications of the National Formulary.

Emulsifying wax is created when a wax material (either a vegetable wax of some kind or a petroleum-based wax) is treated with a detergent (typically sodium dodecyl sulfate or polysorbates) to cause it to make oil and water bind together into a smooth emulsion. It is a white waxy solid with a low fatty alcohol odor.

According to the United States Pharmacopoeia - National Formulary (USP-NF), the ingredients for emulsifying wax NF are cetearyl alcohol and a polyoxyethylene derivative of a fatty acid ester of sorbitan (a polysorbate). [1]

In a cosmetic product, if the emulsifying wax used meets the standards for the National Formulary, it may be listed in the ingredient declaration by the term "emulsifying wax NF". [2] Otherwise, the emulsifier is considered a blended ingredient and the individual components must be listed individually in the ingredient declaration, placed appropriately in descending order of predominance in the whole. [3]

Safety

The Cosmetic Ingredient Review Expert Panel reviewed the safety and use of Emulsifying Wax NF in 1984. [4] Their review of usage reported during the previous years found only 12 products using emulsifying wax; those all had usage rates under 10%. Over 35 animal and human studies were cited in the review; none showed more than minor irritation or reaction. The safety assessment found that Emulsifying Wax NF was safe to use as a cosmetic ingredient at the then-present practices and concentrations of use.

The Cosmetic Ingredient Review Expert Panel revisited Emulsifying Wax NF in 2003. They found that it was used in 102 cosmetic products in 2002 at a maximum use concentration of 21% (in hair straighteners). Based on the data available in 2003, the CIR determined not to open a new safety assessment. [5]

Related Research Articles

Sodium dodecyl sulfate (SDS) or sodium lauryl sulfate (SLS), sometimes written sodium laurilsulfate, is an organic compound with the formula CH3(CH2)11OSO3Na and structure H3C−(CH2)11−O−S(=O)2−O−Na+. It is an anionic surfactant used in many cleaning and hygiene products. This compound is the sodium salt of the 12-carbon organosulfate. Its hydrocarbon tail combined with a polar "headgroup" give the compound amphiphilic properties that make it useful as a detergent. SDS is also component of mixtures produced from inexpensive coconut and palm oils. SDS is a common component of many domestic cleaning, personal hygiene and cosmetic, pharmaceutical, and food products, as well as of industrial and commercial cleaning and product formulations.

<span class="mw-page-title-main">Cosmetics</span> Substances applied to the body to change appearance or fragrance

Cosmetics are composed of mixtures of chemical compounds derived from either natural sources or synthetically created ones. Cosmetics have various purposes, including personal and skin care. They can also be used to conceal blemishes and enhance natural features. Makeup can also add colour to a person's face, enhance a person's features or change the appearance of the face entirely to resemble a different person, creature, or object.

<span class="mw-page-title-main">Triclosan</span> Antimicrobial agent

Triclosan is an antibacterial and antifungal agent present in some consumer products, including toothpaste, soaps, detergents, toys, and surgical cleaning treatments. It is similar in its uses and mechanism of action to triclocarban. Its efficacy as an antimicrobial agent, the risk of antimicrobial resistance, and its possible role in disrupted hormonal development remains controversial. Additional research seeks to understand its potential effects on organisms and environmental health.

<span class="mw-page-title-main">Cosmetology</span> Study and application of beauty treatment

Cosmetology is the study and application of beauty treatment. Branches of specialty include hairstyling, skin care, cosmetics, manicures/pedicures, non-permanent hair removal such as waxing and sugaring, and permanent hair removal processes such as electrology and intense pulsed light (IPL).

In organic chemistry, ethoxylation is a chemical reaction in which ethylene oxide adds to a substrate. It is the most widely practiced alkoxylation, which involves the addition of epoxides to substrates.

<span class="mw-page-title-main">Mink oil</span> Oil derived from the fat of mink

Mink oil is an oil used in medical and cosmetic products. It is obtained by the rendering of mink fat which has been removed from pelts bound for the fur industry.

Stearyl alcohol, or 1-octadecanol, is an organic compound classified as a saturated fatty alcohol with the formula CH3(CH2)16CH2OH. It takes the form of white granules or flakes, which are insoluble in water. It has a wide range of uses as an ingredient in lubricants, resins, perfumes, and cosmetics. It is used as an emollient, emulsifier, and thickener in ointments, and is widely used as a hair coating in shampoos and hair conditioners. Stearyl heptanoate, the ester of stearyl alcohol and heptanoic acid (enanthic acid), is found in most cosmetic eyeliners. Stearyl alcohol has also found application as an evaporation suppressing monolayer when applied to the surface of water.

<span class="mw-page-title-main">Polysorbate</span> Class of chemical compounds

Polysorbates are a class of emulsifiers used in some pharmaceuticals and food preparation. They are commonly used in oral and topical pharmaceutical dosage forms. They are also often used in cosmetics to solubilize essential oils into water-based products. Polysorbates are oily liquids derived from ethoxylated sorbitan esterified with fatty acids. Common brand names for polysorbates include Kolliphor, Scattics, Alkest, Canarcel, Tween, and Kotilen.

<span class="mw-page-title-main">Diethanolamine</span> Chemical compound

Diethanolamine, often abbreviated as DEA or DEOA, is an organic compound with the formula HN(CH2CH2OH)2. Pure diethanolamine is a white solid at room temperature, but its tendencies to absorb water and to supercool often results in it being found in a colorless, viscous liquid state. Diethanolamine is polyfunctional, being a secondary amine and a diol. Like other organic amines, diethanolamine acts as a weak base. Reflecting the hydrophilic character of the secondary amine and hydroxyl groups, DEA is soluble in water. Amides prepared from DEA are often also hydrophilic. In 2013, the chemical was classified by the International Agency for Research on Cancer as "possibly carcinogenic to humans" (Group 2B).

Jojoba esters are the hydrogenation or transesterification product of Jojoba oil. Jojoba Esters are commonly used in cosmetic formulations as an emollient, due to its remarkable similarity to the natural oils produced by the human skin, and its high oxidative stability. Fully hydrogenated jojoba esters are most often small beads used to exfoliate the skin.

<span class="mw-page-title-main">Polysorbate 80</span> Nonionic surfactant and emulsifier used in food and cosmetics

Polysorbate 80 is a nonionic surfactant and emulsifier often used in pharmaceuticals, foods, and cosmetics. This synthetic compound is a viscous, water-soluble yellow liquid.

Polysorbate 20 is a polysorbate-type nonionic surfactant formed by the ethoxylation of sorbitan monolaurate. Its stability and relative nontoxicity allows it to be used as a detergent and emulsifier in a number of domestic, scientific, and pharmacological applications. As the name implies, the ethoxylation process leaves the molecule with 20 repeat units of polyethylene glycol; in practice these are distributed across 4 different chains, leading to a commercial product containing a range of chemical species.

<span class="mw-page-title-main">Polyglycerol polyricinoleate</span> Emulsion used in food production

Polyglycerol polyricinoleate (PGPR), E476, is an emulsifier made from glycerol and fatty acids. In chocolate, compound chocolate and similar coatings, PGPR is mainly used with another substance like lecithin to reduce viscosity. It is used at low levels, and works by decreasing the friction between the solid particles in molten chocolate, reducing the yield stress so that it flows more easily, approaching the behaviour of a Newtonian fluid. It can also be used as an emulsifier in spreads and in salad dressings, or to improve the texture of baked goods. It is made up of a short chain of glycerol molecules connected by ether bonds, with ricinoleic acid side chains connected by ester bonds.

<span class="mw-page-title-main">Organosulfate</span> Organic compounds of the form R–O–SO₃ (charge –1)

In organosulfur chemistry, organosulfates are a class of organic compounds sharing a common functional group with the structure R−O−SO−3. The SO4 core is a sulfate group and the R group is any organic residue. All organosulfates are formally esters derived from alcohols and sulfuric acid although many are not prepared in this way. Many sulfate esters are used in detergents, and some are useful reagents. Alkyl sulfates consist of a hydrophobic hydrocarbon chain, a polar sulfate group and either a cation or amine to neutralize the sulfate group. Examples include: sodium lauryl sulfate and related potassium and ammonium salts.

Polyethylene glycol propylene glycol cocoates or PEG propylene glycol cocoates are chemical compounds produced by the esterification of polyoxyalkyl alcohols with fatty acids from coconut oil. Their chemical designation is PEG-8, referring to its polyethylene glycol (PEG) molecular chain length.

<span class="mw-page-title-main">Defoamer</span> Chemical additive that reduces and hinders the formation of foam in liquids

A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed.

<span class="mw-page-title-main">Mono- and diglycerides of fatty acids</span> Emulsifier

Mono- and diglycerides of fatty acids (E471) refers to a naturally occurring class of food additive composed of diglycerides and monoglycerides used as an emulsifier in foods such as infant formula, fresh pasta, jams and jellies, chocolate, creams, baked goods, and more. It is also used as a fruit coating agent. This mixture is also sometimes referred to as partial glycerides.

<span class="mw-page-title-main">Sodium bisulfite</span> Chemical compound

Sodium bisulfite (or sodium bisulphite, sodium hydrogen sulfite) is a chemical mixture with the approximate chemical formula NaHSO3. Sodium bisulfite is not a real compound, but a mixture of salts that dissolve in water to give solutions composed of sodium and bisulfite ions. It appears in form of white or yellowish-white crystals with an odor of sulfur dioxide. Regardless of its ill-defined nature, sodium bisulfite is used in many different industries such as a food additive with E number E222 in the food industry, a reducing agent in the cosmetic industry, and a decomposer of residual hypochlorite used in the bleaching industry.

Lactylates are organic compounds that are FDA approved for use as food additives and cosmetic ingredients, e.g. as food-grade emulsifiers. These additives are non-toxic, biodegradable, and typically manufactured using biorenewable feedstocks. Owing to their safety and versatile functionality, lactylates are used in a wide variety of food and non-food applications. In the United States, the Food Chemicals Codex specifies the labeling requirements for food ingredients including lactylates. In the European Union, lactylates must be labelled in accordance with the requirements of the applicable EU regulation. Lactylates may be labelled as calcium stearoyl lactylate (CSL), sodium stearoyl lactylate (SSL), or lactylic esters of fatty acids (LEFA).

References

  1. ↑ "NF Monographs: Emulsifying Wax". Archived from the original on 2016-08-25. Retrieved 2018-08-08.
  2. ↑ "21 CFR 701.3(c)(2)(ii) Designation of ingredients". Gpo.gov. Retrieved 5 March 2019.
  3. ↑ Nutrition, Center for Food Safety and Applied. "Labeling Regulations - Cosmetic Labeling Guide". Fda.gov. Retrieved 5 March 2019.
  4. ↑ Cosmetic Ingredient Review (November 3, 1984). "Final Report on the Safety Assessment of Fossil and Synthetic Waxes". Journal of the American College of Toxicology. 3. Retrieved 2022-02-16.
  5. ↑ "Annual Review of Cosmetic Ingredient Safety Assessments—2002/2003". International Journal of Toxicology. 2005 (24(1_suppl): 1–102. doi:10.1080/10915810590918625 . Retrieved 2022-02-16.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.