| EoN 460 | |
|---|---|
 | |
| Role | Single-seat standard class sailplane |
| National origin | United Kingdom |
| Manufacturer | Elliotts of Newbury |
| First flight | 26 April 1960 [1] |
| Produced | 1963-c.1966 |
| Number built | 55 [2] |
The EoN 460 series are wooden single-seat standard class sailplanes, built in the UK in the 1960s. It did not have major competition success but some remain in use in 2021.
It was built in 1961 as a completely new Standard Class glider. The name Eon 460, sometimes written as Eon Olympia 460, stands both for a series of gliders and for the prototypes of the series, all described by EoN as Type 10. Five slightly different model 460 prototypes were followed by 48 production model 463s. Two model 465s, with slimmer, slightly longer fuselages made possible by a semi-reclining pilot's position, were built for the 1965 World Gliding Championships. [2] They were the last gliders designed and built by Elliotts of Newbury before their takeover by Slingsby Sailplanes in March 1966. [3]
All the 460 series have wooden structures and are largely plywood skinned. They have straight-tapered cantilever shoulder wings with 5° of dihedral and fabric covering over the plywood skin. The prototypes and production 463s have fabric-covered Frise type ailerons; the type 465 has sealed, pendulum-type ailerons. All have plywood DFS type airbrakes extending above and below the wings; standard class gliders do not carry flaps. The straight-tapered tail surfaces are fabric covered. The rudder runs to the keel via a cut-out in the horizontal trailing edge. The tailplane is a cantilever structure, mounted on top of the fuselage, folding upwards for transport and carrying conventional split elevators with a starboard trim tab on the prototypes and production 463s. The 465s have non-folding all-moving tailplanes with tabs on both trailing edges. [2] [3]
The fuselage is a flat-sided Warren girder structure, plywood covered apart from the curved glass fibre rear decking. Wing attachment involves some aluminium fittings. The single seat cockpit is ahead of the wing leading edge under a single piece canopy. All 460 series aircraft use a fixed, unsprung monowheel main undercarriage. On the first four prototypes at least, this was mounted below the fuselage in a fairing which exposed only the edge of the wheel. [4] On the 463s, the wheel is unfaired but assisted by an integral skid. The 465s have no skid and the wheel mounting is instead raised into the fuselage. All have a tail bumper with a "roller skate" tailwheel. [2] [3]
The Eon 460 first flew on 26 April 1960 then went to RAE Bedford for testing and, whilst there, took part in the RAF and Interforces Competition held at RAF Odiham in July that year. [5] [6] This machine, registered as G-APWL and designated 460 Type A had a wing with aspect ratio 20 and an all-up weight of 600 lb (272 kg), well in excess of its design weight. It was followed by the Type B with aspect ratio of 18 and an all-up weight of 630 lb (286 kg), the values adopted for production machines. Both these aircraft had performances limited by turbulence generated behind the canopy and at the wing roots. They were followed by the Type C which was like the Type A but had a longer, lower hood and upper decking. [4] [7] The final prototype variant was the Type D, like the Type C but with modified outer wing sections. The less competitive production machines, produced from April 1963, [1] were as the Type D but with wings of aspect ratio 18. [2] despite opposition from the designer, Harry Midwood, and the chief test pilot, David Ince.
Three EoN 460s, the first three prototypes with the Type A modified to Type C canopy style, competed without success in the 1961 National Championships, failing to finish in the top five places and outperformed by earlier EoN Olympia variants. [4]
Both the EoN 465s competed in the 1965 World Gliding Championships held in the UK at South Cerney but performed poorly, placed 9th and 41st out of a field of 45 in the Standard Class. A 463 also competed, finishing 40th. [8]
Most of the 460 series aircraft flew with clubs and private owners in the UK, including five used by Royal Air Force Gliding & Soaring Association branches. Some are still flying, including BGA1296 ("BWE"), which was at the Vintage Glider Club rally held at Tibenham in August 2010. Four 463s went to New Zealand, one 463 and the first 465 to South Africa and one 463 to Croatia. [1] [2] [9]
A 460 is under restoration at the Gliding Heritage Centre in Hampshire. The second 463 is on display in the Museum of Science and Industry in Manchester and the second 465 at the Museum of Berkshire Aviation. [10]
Data from Ellison [2]
Data from Jane's All the World's Aircraft 1966/7 [3]
General characteristics
Performance
The Schleicher Ka 6 is a single-seat glider designed by Rudolf Kaiser, built by Alexander Schleicher GmbH & Co, Germany and is constructed of Spruce and plywood with fabric covering. The design initially featured a conventional tailplane and elevator which was later replaced by an all-moving tailplane in the -Pe and Ka 6E variants. Variants built before the -CR and -BR used a main skid as the principal undercarriage, with later variants including the Ka 6E using a wheel as the main undercarriage with no nose skid. Other modifications for the Ka 6E include a more aerodynamic fuselage with glassfibre nose and wingroot fairings, longer canopy, and modified aluminium airbrakes.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The SZD-24 Foka (Seal) was a single-seat high performance aerobatic glider designed and built in Poland in 1960.
The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.
Elliotts of Newbury was a British company that became well known for manufacturing gliders.
The Eon Olympia was a glider produced from 1947 by Elliotts of Newbury.
The IS-1 Sęp was a single-seat high-performance glider designed and built in Poland from 1947. It was the first post-war Polish glider.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.
The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.
The CVV-4 Pellicano was a single seat Italian glider designed for a competition to select an aircraft for the 1940 Olympic Games. The DFS Olympia Meise was preferred to it after the trials in Italy in 1939.
The VTC Delfin is a competition single seat Standard class glider designed and built in Yugoslavia in the 1960s. It had some success in national competitions and went into small scale production.
The Castel C.25S, sometimes known as the Aire, is a French training glider with side by side seating first flown during World War II. Post war, more than 100 were built for clubs, establishing national records. Several remained registered in 2010.
The Caproni Vizzola MF and 2 were single-seat gliders built in Italy just before World War II. Intended as training aircraft capable of aerobatics, the two variants differed only in their fuselages. Only one of each was built, but they were both successful in Italian competitions.
The Teichfuss Nibio was an Italian single seat glider, designed by Luigi Teichfuss and flown in two versions around 1930.
The IFIL-Reghin RG-5 Pescăruș or CIL Reghin RG-5 Pescăruș was a Romanian single seat sailplane built in the 1950s. Twenty six were constructed for gliding clubs.
The RRG Professor was a very early soaring glider and the first to use a variometer for finding thermals. It was designed by Alexander Lippisch in Germany, first flying in 1928. The Professor was widely built by both flying clubs and factories.
The Schleicher Ka-2 Rhönschwalbe is a tandem two-seat training glider designed and built in Germany, in 1952.
The Schneider ES-54 Gnome was an experimental low cost glider with a laminar flow but low aspect ratio wing, built in Australia in the mid-1950s. Its performance was predictably poor and only one was completed.
The Schneider ES49 is a two-seat glider trainer, designed, first flown in late August 1951 and commercially produced in Germany but later built from plans by gliding clubs in Australia. A major redesign there led to the ES49B Kangaroo.
 | Wikimedia Commons has media related to EoN 460 . |