Farrar LSG-1 Bird Flight Machine

Last updated

LSG-1 Bird Flight Machine
Role Experimental research glider
National origin United States
Designer Demetrius F. Farrar Jr.
Introduction1969
StatusProduction completed
Primary user Vanderbilt University
Number builtone

The Farrar LSG-1 Bird Flight Machine is an American, high-wing, V-tailed, single-seat, experimental research glider that was designed and built by Demetrius F. Farrar Jr. in 1969 for exploring aspects of bird flight. [1] [2]

Contents

Design and development

The LSG-1 was specially designed by Farrar for research purposes as part of a Vanderbilt University project into how birds fly and was supported by the US National Science Foundation. The aircraft's design goals included a stall speed of 20 mph (32 km/h) and a 60-foot per minute (0.30 m/s) sink rate. [1]

The aircraft is of mixed construction. The fuselage is made from a sandwich of balsa and fiberglass, while the wing is of wood and Kevlar, built on an aluminium spar. Its 61 ft (18.6 m) span wing employs an unusual Wortmann FX 05-H-126 airfoil, which was originally designed for helicopter use. This airfoil section was chosen because it has zero pitching moment, which thus allows moderate torsional loads despite the resulting glider's relatively large wing area of 230 sq ft (21 m2). The LSG-1 has no glidepath control devices, such as dive brakes, making it a challenge to land. Despite its large wingspan the aircraft has a very low empty weight of 181 lb (82 kg), giving it a very low wing loading of 1.55 lb/sq ft (7.6 kg/m2). [1] [3]

Only one LSG-1 was built and it was registered with the US Federal Aviation Administration in the Experimental - Amateur-built category. [1] [2]

Operational history

The aircraft was used to explore bird exploitation of microlift under supervision of Gary Osoba. In August 2011, 42 years after it was completed, the aircraft was still on the FAA aircraft register and still owned by the designer. Its registration expired and was cancelled on 29 April 2013 and it is unknown if the aircraft still exists or not. [1] [2]

Operators

Specifications (LSG-1)

Data from Sailplane Directory [1]

General characteristics

Performance

See also

Related lists

Related Research Articles

Glasflügel 604 German single-seat glider, 1970

The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.

The IKV-3 "Kotka" is an FAI Open Class glider that was designed by Tuomo Tervo and Jorma Jalkanen. The prototype first flew in 1966. It was produced initially by IK-Vasama and KK. Lehtovaara.

Laister LP-15 Nugget

The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.

Hall Vector 1

The Hall Vector 1 is an American high-wing, ultralight glider that was designed by Stan Hall for serious cross-country flights.

Bikle T-6

The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons.

Schreder HP-17

The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.

The Gehrlein GP-1 is an American mid-wing, single seat FAI Standard Class glider that was designed by Jay and Rod Gehrlein and first flown in July 1968.

The Monaghan Osprey is an American mid-wing, single-seat, T-tailed, FAI Standard Class glider that was designed and constructed by Richard C. Monaghan of Pearblossom, California.

The Parker RP9 T-Bird is an American, high-wing, T-tailed, single-seat, FAI Open Class glider that was designed and constructed by Ray Parker between 1956 and 1962.

The Whigham GW-5 is an American mid-wing, single seat, FAI Standard Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.

The Vogt Lo-170 is a West German high-wing, FAI Open Class single seat glider that was designed by Alfred Vogt.

The Celair GA-1 Celstar is a South African mid-wing, single-seat, aerobatic glider that was designed by Pieter Celliers and produced by his company, Celair (Pty) Limited.

The Hermanspann Chinook is an American mid-wing, two-seat, experimental research glider that was designed and constructed by Fred Hermanspann and Art Penz.

The Marsden Gemini is a Canadian mid-wing, T-tailed, two-seats in side-by-side configuration, experimental research glider that was designed and constructed by David Marsden at the University of Alberta, first flying in 1973.

Masak Scimitar

The Masak Scimitar was an American mid-wing, single-seat glider that was designed and constructed by Peter Masak.

PZL Krosno KR-03 Puchatek

The PZL Krosno KR-03 Puchatek is a Polish mid-wing, T-tailed, two-seats-in-tandem, glider that was designed by Jerzy Krawczyk and Eugeniusz Pelczar and produced by PZL Krosno, first flying in 1985.

Rensselaer RP-1

The Rensselaer RP-1 is an American low-wing, single-seat, foot-launchable glider that was designed and produced by the Rensselaer Polytechnic Institute of Troy, New York.

The Rensselaer RP-3 is an American mid-wing, T-tailed single-seat, glider that was designed by Brian E. Thompson and produced by the Rensselaer Polytechnic Institute of Troy, New York.

The Manuel Hawk was a homebuilt single-seat glider designed and constructed in the UK around 1970. Only one example was flown.

The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.

References

  1. 1 2 3 4 5 6 7 Activate Media (2006). "Bird Flight Machine Farrar". Archived from the original on 9 June 2007. Retrieved 10 August 2011.
  2. 1 2 3 Federal Aviation Administration (17 August 2019). "Make / Model Inquiry Results N6437" . Retrieved 17 August 2019.
  3. ↑ Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on 20 April 2010. Retrieved 1 August 2011.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.