An inverted roller coaster is a roller coaster in which the train runs under the track with the seats directly attached to the wheel carriage. This latter attribute is what sets it apart from the older suspended coaster, which runs under the track, but swings via a pivoting bar attached to the wheel carriage. The coaster type's inverted orientation, where the passengers' legs are exposed, distinguishes it from a traditional roller coaster, where the passengers' arms are instead exposed.
A stand-up roller coaster is a roller coaster designed to have the passengers stand through the course of the ride.
A flying roller coaster is a type of roller coaster meant to simulate the sensations of flight by harnessing riders in a prone position during the duration of the ride. The roller coaster cars are suspended below the track, with riders secured such that their backs are parallel to the track.
Bolliger & Mabillard, officially Bolliger & Mabillard Consulting Engineers, Inc. and often abbreviated B&M, is a roller coaster design consultancy based in Monthey, Switzerland. The company was founded in 1988 by Walter Bolliger and Claude Mabillard, both of whom had worked for Giovanola.
A Floorless Coaster is a type of steel roller coaster manufactured by Bolliger & Mabillard where riders sit with no floor underneath them, allowing their feet to swing freely just above the track. Development of the Floorless Coaster model began between 1995 and 1996 with Medusa at Six Flags Great Adventure opening on April 2, 1999, making it the world's first Floorless Coaster. Floorless Coasters also tend to have 3 to 7 inversions incorporated in the layout of the coaster.
A hypercoaster is any complete-circuit roller coaster with a height measuring at least 200 feet (61 m). The term was first coined by Arrow Dynamics and Cedar Point in 1989 with the release of the world's first hypercoaster, Magnum XL-200. It was followed by Pepsi Max Big One five years later featuring a height of 213 feet (65 m). Other roller coaster manufacturers developed models with custom names, including Mega Coasters from Intamin, Hyper Coasters from Bolliger & Mabillard, and Hyper-Hybrid Coasters from Rocky Mountain Construction. The competition between amusement parks to build increasingly taller roller coasters eventually led to giga coasters, which exceed 300 feet (91 m), and strata coasters, which exceed 400 feet (120 m).
The Riddler's Revenge is a stand-up roller coaster located at Six Flags Magic Mountain. Manufactured by Bolliger & Mabillard, the ride opened as the park's eleventh roller coaster on April 4, 1998, setting multiple world records among stand-up coasters. Originally located in the Movie District section of the park, which later became Metropolis in 2017, The Riddler's Revenge was also the park's single biggest investment at a cost of $14 million. It features a height of 156 feet (48 m), a maximum speed of 65 mph (105 km/h), six inversions, and a track length of 4,370 feet (1,330 m).
Nemesis is an inverted roller coaster located at the Alton Towers theme park in England. It opened to the public on March 19, 1994. The ride was manufactured by Bolliger & Mabillard and designed by Werner Stengel, in collaboration with attraction developer John Wardley. It is located in the Forbidden Valley area of the park, adjacent to Galactica and The Blade attractions.
Tatsu is a flying roller coaster designed by Bolliger & Mabillard at the Six Flags Magic Mountain amusement park located in Valencia, California, United States. Manufactured by Bolliger & Mabillard, it opened as the tallest, fastest, and longest flying coaster in the world on May 13, 2006. It became the park's seventeenth coaster, featuring a height of 170 feet (52 m), a track length of 3,602 feet (1,098 m), and a maximum speed of 62 mph (100 km/h). Tatsu also features the world's tallest pretzel loop and the only zero-gravity roll inversion on a flying coaster model. Nearly a decade later, The Flying Dinosaur opened at Universal Studios Japan in 2016, breaking Tatsu's length record and matching its speed. In its debut season, Tatsu was ranked 40th among steel coasters in the annual Golden Ticket Awards from Amusement Today, peaking with a rank of 28 in 2012.
Superman: Ultimate Flight is the name of three flying roller coasters currently operating at three Six Flags amusement parks in the United States, those being Six Flags Over Georgia, Six Flags Great Adventure and Six Flags Great America. Each of these steel coasters were designed and built by Swiss manufacturer Bolliger & Mabillard and opened in 2002 and 2003. Since 2003, Six Flags has installed Superman: Ultimate Flight in three of their parks. Themed to the popular comic book character, Superman: Ultimate Flight simulates flying by positioning its passengers parallel to the track, supported by harnesses and facing the ground through most of the ride. In the station, riders board the train sitting down. After the train is locked and checked, the trains are raised into the flying position. After the ride, the seats are lowered back into the sitting position for the next round of riders.
A Giant Inverted Boomerang is a type of steel shuttle roller coaster manufactured by the Dutch firm Vekoma. The ride is a larger, inverted version of Vekoma's popular Boomerang sit down roller coasters. As of December 2021, four installations of the model are operating, with another one under construction.
The Suspended Looping Coaster is a model of steel inverted roller coaster built by Vekoma. There are at least 39 different installations across the world. The minimum rider height requirement is 130 centimetres. Vekoma is now marketing a Suspended Thrill Coaster as a successor to the Suspended Looping Coaster. The Odyssey is the largest, fastest and tallest SLC ever built at Fantasy Island in the UK.
Galactica is a flying roller coaster located in the Forbidden Valley area of Alton Towers amusement park in Staffordshire, England and is the first flying coaster manufactured by Bolliger & Mabillard. Guests ride in a prone position and experience the feeling of flight by "flying" close to the ground, under footpaths, and narrowly past trees and rocks.
T3 (stylized as T3; pronounced "T-three", "T-cubed", or "Terror to the third power") is an inverted roller coaster at Kentucky Kingdom in Louisville, Kentucky. Previously named T2, the Suspended Looping Coaster model manufactured by Vekoma opened on April 8, 1995. The amusement park closed in 2009 due to financial difficulties, but later reopened under new ownership in 2014. The roller coaster was refurbished and renamed T3, which reopened to the public on July 3, 2015.
The Dive Coaster is a steel roller coaster model developed and engineered by Bolliger & Mabillard. The design features one or more near-vertical drops that are approximately 90 degrees, which provide a moment of free-falling for passengers. The experience is enhanced by unique trains that seat up to ten riders per row, spanning only two or three rows total. Unlike traditional train design, this distinguishing aspect gives all passengers virtually the same experience throughout the course of the ride. Another defining characteristic of Dive Coasters is the holding brake at the top of the lift hill that holds the train momentarily right as it enters the first drop, suspending some passengers with a view looking straight down and releasing suddenly moments later.
Roller coaster elements are the individual parts of roller coaster design and operation, such as a track, hill, loop, or turn. Variations in normal track movement that add thrill or excitement to the ride are often called "thrill elements".
Wing Coaster is engineering firm Bolliger & Mabillard’s designation for its winged roller coaster designs. Winged roller coasters are a type of steel roller coaster where pairs of riders sit on either side of a roller coaster track in which nothing is above or below the riders. B&M began development on the first Wing Coaster between 2007 and 2008 leading to the opening of Raptor at Gardaland on 1 April 2011. There are currently sixteen B&M-designed Wing Coasters either under construction or operating worldwide as of December 2020.
Sky Scrapper is a flying roller coaster at World Joyland in Wujin, Changzhou, Jiangsu, China. Sky Scrapper was one of World Joyland's opening day attractions, officially opening on April 30, 2011. The 2,805.1-foot-long (855.0 m) ride stands 131.3 feet (40.0 m) tall, and features a top speed of 54.7 mph (88.0 km/h). Designed by Swiss firm Bolliger & Mabillard, Sky Scrapper restrains riders in the prone position and features five inversions.
Martin & Vleminckx is a roller coaster manufacturing and construction company headquartered in Montreal, Quebec, Canada with an affiliated office and manufacturing facility in Haines City, Florida, United States, and two subsidiaries, including a warehouse, in China.
Goliath was a steel shuttle roller coaster located at Six Flags New England in Agawam, Massachusetts. Manufactured by Vekoma, the ride originally opened as Déjà Vu at Six Flags Magic Mountain in 2001. The ride was a larger, inverted version of Vekoma's popular Boomerang sit-down roller coasters. In 2021, the park removed the ride from its map indicating it will not reopen for the remainder of the season. In late 2021, demolition of the coaster began.
