French cruiser Duquesne (1876)

Last updated
1903-Henry-Traumer-Duquesne-French iron-clad.jpg
Painting of Duquesne
History
Civil and Naval Ensign of France.svg France
NameDuquesne
Builder Arsenal de Rochefort
Laid down18 June 1873
Launched11 March 1876
Commissioned20 January 1878
Stricken4 December 1901
FateSold for scrap, 2 March 1908
General characteristics
Class and type Duquesne class
Displacement5,824  t (5,732 long tons; 6,420 short tons)
Length99.64 m (326 ft 11 in)
Beam15.56 m (51 ft 1 in)
Draft7.14 m (23 ft 5 in)
Installed power
Propulsion
Sail plan Full ship rig
Speed16.85 knots (31.21 km/h; 19.39 mph)
Range6,680 nautical miles (12,370 km; 7,690 mi) at 10 knots (19 km/h; 12 mph)
Complement551
Armament

Duquesne was an unprotected cruiser built for the French Navy in the 1870s, the lead ship of the Duquesne class. She was ordered in the aftermath of the Franco-Prussian War, and was intended for use against commerce raiders, which necessitated a high top speed, heavy armament, and long cruising radius. The ship's engines proved to be very unreliable, and coupled with the high cost of operating the vessel, she proved to be a disappointment in service. As a result, she saw limited use; she had one major overseas deployment in the mid-1880s, during which time she cruised in the Pacific Ocean. She operated with the Atlantic Division in 1894 and 1895, but saw no further service. She was struck from the naval register in 1901 and was sold for scrap in 1908.

Contents

Design

Plan and profile of the Duquesne class Plan and profile sketch of the Duquesne class.jpg
Plan and profile of the Duquesne class

The two ships of the Duquesne class of unprotected cruisers were ordered during the administration of Louis Pothuau in response to the success of Confederate commerce raiders during the American Civil War. The intent was for the new vessels to be fast enough to catch enemy raiders and powerful enough to defeat them, and to have the endurance to operate abroad for extended periods of time. In service, the ships proved to be disappointments, owing to the great cost to operate them and the unreliability of their engines, which required significant maintenance to keep running. As a result, they had fairly short active careers. [1] [2] Duquesne and Tourville are sometimes considered to be different classes, [3] but they were built to the same design by Alfred Lebelin de Dionne and different only in the arrangement of their propulsion system. [4]

Duquesne was 99.64 m (326 ft 11 in) long at the waterline, with a beam of 15.56 m (51 ft 1 in) and an average draft of 7.14 m (23 ft 5 in). She displaced 5,824  t (5,732 long tons ; 6,420 short tons ) as designed. The ship had a short forecastle deck, a ram bow, and an overhanging stern. Her crew amounted to 551 officers and enlisted men. The ship's propulsion system consisted of a pair of compound steam engines driving a single screw propeller. Steam was provided by twelve coal-burning fire-tube boilers that were ducted into a pair of funnels placed amidships. Her machinery was rated to produce 7,200 indicated horsepower (5,400  kW ) for a top speed of 16.85 knots (31.21 km/h; 19.39 mph). At a more economical speed of 10 knots (19 km/h; 12 mph), the ship could steam for 6,680 nautical miles (12,370 km; 7,690 mi). She had a full ship rig to supplement her steam engine on long voyages overseas. [1] [3]

The ship was armed with a main battery of seven 194 mm (7.6 in) M1870 guns; three guns were placed on each broadside in sponsons, and the seventh gun was placed in the forecastle as a chase gun. These were supported by a secondary battery of fourteen 138.6 mm (5.46 in) M1870 guns, which were placed in a gun battery amidships, seven guns per broadside. Six 37 mm (1.5 in) Hotchkiss revolver cannon provided close-range defense against torpedo boats. She also carried four 86.5 mm (3.41 in) bronze cannon and a single 121 mm (4.8 in) bronze cannon that could be sent ashore with a landing party or used to arm the ship's boats. [5]

Modifications

In 1886, the ship received an additional eight 37 mm guns, bringing the total to fourteen. In 1893–1894, Duquesne underwent a major reconstruction in an attempt to correct the deficiencies with her propulsion system and modernize her armament. The both sets of engines had their cylinders replaced with narrower cylinders, and she received twelve new cylindrical boilers that had a significantly higher operating pressure, though they were smaller and generated less power, at 5,000 indicated horsepower (3,700 kW). Her original main and secondary batteries were replaced with seven 164.7 mm (6.48 in) M1881 quick-firing guns (QF) and fourteen 138.6 mm M1881 QF guns. [5]

Service history

Duquesne off the Mare Island Naval Shipyard, United States, around 1889 French cruiser Duquesne NH 71236.jpg
Duquesne off the Mare Island Naval Shipyard, United States, around 1889

The keel for Duquesne was laid down at the Arsenal de Rochefort in Rochefort on 18 June 1873. Her completed hull was launched on 11 March 1876 and she was commissioned to begin sea trials on 20 January 1878, though work on her machinery continued until 14 February, and her initial testing did not begin until 20 May. Her trials were completed on 10 December, when she was placed in the 2nd category of reserve She was recommissioned on 20 June 1879 to operate with the main French fleet experimentally, and she was soon decommissioned again on 20 September. She remained out of service into the early 1880s, during which time she underwent modifications. In January 1884, she was reduced to the 3rd category of reserve. [5]

On 21 December 1885, Duquesne was recommissioned for a deployment to the Pacific station. [5] In November 1888, Duquesne was dry docked in San Francisco in the United States after having spent the last two and a half years on the Pacific station. Her wood and copper sheathed hull had protected her from significant marine biofouling, and less than half a ton of fouling was removed. [6] In the early 1890s, the ship was extensively modified, including an entirely new armament of quick-firing guns. Work was completed by 1894, [5] and in June, Duquesne was assigned to the Atlantic Division, along with the unprotected cruisers Villars and Beautemps-Beaupré and the aviso Hussard. [7] The following year, the unit consisted of Duquesne, the cruiser Roland, and a sloop. [8]

During the Fashoda Crisis in 1898, some consideration was given to disarming Duquesne and Tourville and using the guns to arm the new pre-dreadnought battleships Gaulois and Charlemagne, which were complete except for their armament. But the crisis passed and the plan came to nothing. [9] Duquesne was struck from the naval register on 4 December 1901, though she remained in the navy's inventory through 1907. She was ultimately sold to ship breakers on 2 March 1908. [5]

Notes

  1. 1 2 Roberts, pp. 96–97.
  2. Ropp, p. 39.
  3. 1 2 Campbell, p. 318.
  4. Roberts, p. 96.
  5. 1 2 3 4 5 6 Roberts, p. 97.
  6. Hichborn, p. 37.
  7. Garbett 1894, p. 662.
  8. Brassey 1895, p. 53.
  9. Garbett 1902, p. 239.

Related Research Articles

French cruiser <i>Jean Bart</i> Protected cruiser of the French Navy

Jean Bart was a protected cruiser of the Jean Bart class built for the French Navy in the late 1880s and early 1890s. The lead ship the class of two ships, Jean Bart and her sister ship were ordered during the tenure of Admiral Théophile Aube as Minister of Marine according to the theories of the Jeune École doctrine. The ships were intended as long-range commerce raiders, and they were armed with a main battery of four 164 mm (6.5 in) guns, were protected by an armor deck that was 50 to 100 mm thick, and were capable of steaming at a top speed of 19.5 knots.

French cruiser <i>Amiral Cécille</i> Protected cruiser of the French Navy

Amiral Cécille was a protected cruiser of the French Navy, named in honour of Jean-Baptiste Cécille. The third vessel of that type built in France, her design was derived from her two predecessors, Sfax and Tage. Like those vessels, Amiral Cécille was intended to be used as a commerce raider to attack merchant shipping. As such, she carried a barque sailing rig to supplement her steam engines for long voyages overseas. Amiral Cécille was armed with a main battery of eight 164 mm (6.5 in) guns and had a curved armor deck that was 56 to 102 mm thick.

French cruiser <i>Troude</i> Protected cruiser of the French Navy

Troude was a protected cruiser of the French Navy, the lead ship of the Troude class. The class was built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the preceding Forbin class, the primary improvement being the addition of armor to the conning tower. Troude was built in the 1880s and was completed in late 1890. She was armed with a main battery of four 138 mm (5.4 in) guns, protected with an armor deck that was 41 mm (1.6 in) thick, and had a top speed of 20.5 knots.

<i>Dévastation</i>-class ironclad

The Dévastation-class ironclads were a class of ironclad battleships that were laid down as part of the 1872 programme. They were a development of the 1876 ironclad Redoutable. The class consisted of Dévastation and Courbet.

<i>Jean Bart</i>-class cruiser Protected cruiser class of the French Navy

The Jean Bart class comprised two protected cruisers of the French Navy built in the late 1880s and early 1890s; the two ships were Jean Bart and Isly. They were ordered as part of a fleet program that accorded with the theories of the Jeune École, which proposed a fleet based on cruisers and torpedo boats to defend France. The Jean Bart-class cruisers were intended to serve a long-range commerce raiders to attack enemy merchant shipping. The ships were armed with a main battery of four 164 mm (6.5 in) guns supported by six 138 mm (5.4 in) guns and they had a top speed of 19 to 19.5 knots.

<i>Troude</i>-class cruiser Protected cruiser class of the French Navy

The Troude class was a group of three protected cruisers built for the French Navy in the late 1880s and early 1890s. The class, which was very similar to the preceding Forbin class, comprised Troude, Cosmao and Lalande. They were ordered as part of a fleet program that accorded with the theories of the Jeune École, which proposed a fleet based on cruisers and torpedo boats to defend France. The Troude-class cruisers were intended to serve as flotilla leaders for the torpedo boats, and they were armed with a main battery of four 138 mm (5.4 in) guns.

French ironclad <i>Vauban</i> Ironclad warship of the French Navy

Vauban was the lead ship of the Vauban class of ironclad barbette ships built for the French Navy in the late 1870s and 1880s. Intended for service in the French colonial empire, she was designed as a "station ironclad", smaller versions of the first-rate vessels built for the main fleet. The Vauban class was a scaled down variant of Amiral Duperré. They carried their main battery of four 240 mm (9.4 in) guns in open barbettes, two forward side-by-side and the other two aft on the nautical. Vauban was laid down in 1879 and was completed in 1885.

French ironclad <i>Turenne</i> Ironclad warship of the French Navy

Turenne was an ironclad barbette ship of the French Navy built in the 1870s and 1890s; she was the second and final member of the Bayard class. Intended for service in the French colonial empire, she was designed as a "station ironclad", which were smaller versions of the first-rate vessels built for the main fleet. The Bayard class was a scaled down variant of Amiral Duperré. They carried their main battery of four 240 mm (9.4 in) guns in open barbettes, two forward side-by-side and the other two aft on the centerline. Turenne was laid down in 1877 and was commissioned in 1882. She was sent to East Asia in early 1885 during the Sino-French War, but the conflict had ended by the time she arrived in the area. Turenne served as the flagship of the French squadron in the region for the next five years before returning to France in early 1890. The ship saw little active service in home waters, and remained in the reserve fleet for about a decade before being sold for scrap in 1901.

French cruiser <i>Tage</i> Protected cruiser of the French Navy

Tage was a protected cruiser built for the French Navy in the 1880s, the second vessel of that type built for the French fleet. The design was based on the previous cruiser, Sfax, and like that vessel, Tage was intended to be used as a commerce raider to attack merchant shipping. As such, she carried a barque sailing rig to supplement her steam engines for long voyages overseas. Tage was armed with a main battery of eight 164 mm (6.5 in) guns and had a curved armor deck that was 51 to 56 mm thick.

French cruiser <i>Sfax</i> Protected cruiser of the French Navy

Sfax was a protected cruiser built for the French Navy in the 1880s. She was the first vessel of the type to be built for the French Navy, which was a development from earlier unprotected cruisers like Milan. Unlike the earlier vessels, Sfax carried an armor deck that covered her propulsion machinery and ammunition magazines. Intended to be used as a commerce raider in the event of war with Great Britain, Sfax was rigged as a barque to supplement her engines on long voyages abroad. She was armed with a main battery of six 164 mm (6.5 in) guns and a variety of lighter weapons.

French cruiser <i>Isly</i> Protected cruiser of the French Navy

Isly was a Jean Bart-class protected cruiser built in the late 1880s and early 1890s for the French Navy. The second and final member of the class, Isly and her sister ship were ordered during the tenure of Admiral Théophile Aube as Minister of Marine according to the theories of the Jeune École doctrine. The ships were intended as long-range commerce raiders, and they were armed with a main battery of four 164 mm (6.5 in) guns, were protected by an armor deck that was 50 to 100 mm thick, and were capable of steaming at a top speed of around 19 knots.

French cruiser <i>Dubourdieu</i> French unprotected cruiser

Dubordieu was an unprotected cruiser built for the French Navy in the early 1880s. Intended to serve as a long-range commerce raider, the ship was fitted with a sailing rig to supplement its steam engine on long voyages, and she carried an armament of four 165 mm (6.5 in) and twelve 140 mm (5.5 in) guns. She was among the final French unprotected cruisers, thereafter being replaced by more durable protected cruisers. The French Navy was not satisfied with the vessel, owing to her obsolescent design, since she too weak to defeat the more powerful protected cruisers and was too slow to escape from them.

French cruiser <i>Aréthuse</i> French unprotected cruiser

Aréthuse was an unprotected cruiser built for the French Navy. The ship was laid down in 1879 and completed in 1885. Intended to serve as a long-range commerce raider, the ship was fitted with a sailing rig to supplement its steam engine on long voyages, and she carried an armament of four 165 mm (6.5 in) and twenty-two 140 mm (5.5 in) guns. She was among the final French unprotected cruisers, thereafter being replaced by more durable protected cruisers.

French cruiser <i>Naïade</i> French naval vessel of the 1880s

Naïade was an unprotected cruiser of the French Navy that was built in the late 1870s and early 1880s. The ship was laid down in 1878 and completed in 1883. Intended to serve as a long-range commerce raider, the ship was fitted with a sailing rig to supplement its steam engine on long voyages, and she carried an armament of four 165 mm (6.5 in) and twenty-two 140 mm (5.5 in) guns. She was among the final French unprotected cruisers, thereafter being replaced by more durable protected cruisers.

French cruiser <i>Iphigénie</i> French naval vessel of the 1880s

Iphigénie was an unprotected cruiser of the French Navy built in the late 1870s and early 1880s. The ship was originally intended to serve overseas in the French colonial empire, but shortly after she was completed, the navy decided to convert her into a dedicated training ship. Her original armament of twenty medium-caliber guns was reduced to eight guns to free up space for accommodations. She spent her entire career, from 1884 to 1900, as a training vessel and she embarked on a total of eighteen significant training cruises. Her career passed relatively uneventfully, apart from a couple of minor accidents in the late 1880s. Having been replaced by a newer vessel in 1900, Iphigénie was decommissioned in August that year and was struck from the naval register in December 1901. She was eventually sold for scrap in 1905.

French cruiser <i>Roland</i> French naval vessel of the 1880s

Roland was an unprotected cruiser of the Villars class built for the French Navy in the 1870s, the fourth and final member of the class. The ships were designed for service in the French colonial empire, and they carried a relatively heavy battery of fifteen 138.6 mm (5.46 in) guns, and could steam at a speed of 14.5 knots. The ship was laid down in 1877 and she was completed in 1884. She was deployed to East Asia during the Sino-French War in January 1885, but the conflict had ended by the time she arrived. After completing her tour in East Asian waters, she served a stint in the North Atlantic Squadron from 1890, a role she filled for much of the decade, between periods out of service in reserve. Roland was ultimately struck from the naval register in 1897 and sold for scrap the following year.

French cruiser <i>Tourville</i> (1876) French naval vessel

Tourville was an unprotected cruiser of the Duquesne class built for the French Navy in the 1870s. She was ordered in the aftermath of the Franco-Prussian War, and was intended for use against commerce raiders, which necessitated a high top speed, heavy armament, and long cruising radius. The ship's engines proved to be very unreliable, and coupled with the high cost of operating the vessel, she proved to be a disappointment in service. As a result, she saw just four years of active service during her more than twenty-five years of existence. She took part in the French conquest of Tunisia in 1881 and was sent to East Asia in 1883, but saw no action during the Tonkin campaign, being recalled early the next year, to be replaced by more capable cruisers that were cheaper to operate. She saw no further service and was struck from the naval register in 1901 and was sold for scrap in 1903.

<i>Duquesne</i>-class cruiser (1876) Group of cruisers built in the 19th century for the French Navy

The Duquesne class was a group of two unprotected cruisers built for the French Navy in the 1870s. The class comprised two ships: Duquesne and Tourville. They were ordered in the aftermath of the Franco-Prussian War, and were intended for use against commerce raiders, which necessitated a high top speed, heavy armament, and long cruising radius. Both ships' engines proved to be very unreliable, required significant maintenance to keep in operation, and burned coal voraciously. Their large crews also increased the cost of operating the vessels, and all of these problems led to short service lives. Over the course of the twenty-five years following their launch, Duquesne saw active service for just seven years, while Tourville was in commission for only four. The former made a single deployment overseas in the mid-1880s, when she cruised on the Pacific station for three years, while Tourville spent just a year in the Far East before being recalled. Both ships were struck from the naval register in 1901 and sold for scrap thereafter.

French cruiser <i>Duguay-Trouin</i> (1877) 1870s French naval vessel

Duguay-Trouin was an unprotected cruiser built for the French Navy in the 1870s, the only member of her class. She was ordered as part of a naval construction program after the Franco-Prussian War, and was intended to counter enemy commerce raiders; as such she had a high top speed of 15.5 knots, a heavy armament of five 194 mm (7.6 in) guns, and long cruising radius. Her design was based on the Duquesne-class cruisers, albeit reduced in size, and unlike the earlier vessels, she proved to be a reliable vessel in service.

French cruiser <i>Éclaireur</i> French naval vessel (c. 1870s)

Éclaireur was a Rigault de Genouilly-class cruiser built in the 1870s for the French Navy; she was the second and final member of the class. The ships were intended to fill multiple roles, including as scouts for the French fleet, and to patrol the French colonial empire; as such, they were given a high top speed of 15 knots and were optimized to use their sailing rig for long voyages abroad. They were armed with a main battery of eight 138.6 mm (5.46 in) guns. Éclaireur was built between 1874 and 1878, but she was initially kept in reserve until 1881 for a deployment to patrol France's holdings in the Pacific Ocean. In 1884, she was sent to Southeast Asia to strengthen French naval forces during the Sino-French War, where she saw action at the Battle of Shipu in February 1885. Éclaireur spent the late 1880s and early 1890s in home waters before making another deployment to East Asia from 1897 to 1899. She was quickly recalled to Asia in 1900 during the Boxer Rebellion in Qing China. The ship was struck from the naval register in 1902 and sold to ship breakers in 1904.

References