GM 4L60-E transmission

Last updated
4L60E/4L65E
Overview
Manufacturer General Motors
Production1992–2013
Body and chassis
Class 4-speed longitudinal automatic transmission
Chronology
Predecessor Turbo-Hydramatic 700R4
Successor 6L80/6L90

The 4L60E (and similar 4L65E) is a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series includes 4 forward gears and 1 reverse gear. The 4L60E is the electronically commanded evolution of the Turbo-Hydramatic 700R4, originally produced in 1982.

Contents

The 4L60E and 4L65E are built at Toledo Transmission in Toledo, Ohio and have also been built at Romulus Transmission in Romulus, Michigan and Ramos Arizpe, Mexico.

The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5" depth bell with 6 bolts for non gen 3 LS applications and a 7" depth bell with 7 bolts for LS applications. The 4L65E/70E uses a 7" depth bell and 7 bolts.

They also have different input shafts and torque converters. 4L60E's uses a 298mm input shaft for non LS and a 300mm input shaft for LS applications. 4L65E/4L70E uses a 300mm input shaft and converter designed for LS applications only.

Gear ratios:

1234R
3.0591.6251.0000.6962.294

4L60 and 4L60-E

The TH700R4 was renamed "4L60" (RPO MD8) following the new General Motors naming convention when the electronic version, 4L60E (RPO M30), was phased in as the 4L60 was being phased out. This happened in 1993 for trucks, vans, and SUVs, and 1994 for rear wheel drive passenger cars. In 1996, a bolt-on bell housing was phased in (along with a six-bolt tailhousing) for S-10 Trucks and S-10 Blazers and beginning in 1998 for all other applications. Beginning in 1998 a new 300mm torque converter with improved higher-capacity internals, 300mm style input shaft, and 300mm style pump was also introduced on models coupled to a Gen III Small Block. The 4L60E is rated to handle up to 360 ft⋅lb (490 N⋅m) of torque. It weighs 133 pounds without transmission fluid. [1]

The 4L60E family of transmissions use 2 shift solenoids, initially called Shift Solenoid A & Shift Solenoid B, later changed to comply with OBD II (On Board Diagnostics revision 2) regulations to 1-2 Shift Solenoid & 2-3 Shift solenoid. By activating and deactivating the solenoids in a predetermined pattern by the PCM, 4 distinct gear ratios can be achieved. The last 4L60Es were only used in the GM Vans in 2013, before being replaced by the 6L80E. The shift solenoid pattern, also sometimes referred to as solenoid firing order, is as follows;

Shift Solenoid Pattern

1-2 Solenoid2-3 Solenoid
1st GearOnOn
2nd GearOffOn
3rd GearOffOff
4th GearOnOff

While controlled or partially controlled by the Powertrain Control Module (PCM), third gear is used as a failsafe gear and default operating gear during unexpected conditions. Without computer control, the transmission will automatically hydraulically shift from first gear into second gear based on input shaft RPM. Second gear is recommended for starts on snow and ice, as the available torque is lowered thus preventing wheel slip. The police package (9C1) B-body cars featured a First Gear Block Out (FGBO) Plate on the transmission housing to prevent drivetrain damage. The shift point for first to second gear is about 43 MPH (69 km/h) while second to third gear shift point is about 83 MPH (134 km/h) assuming a 3.08:1 differential and a 5,500 RPM engine speed limit.

Applications

4L65E

An updated 4L60E, the 4L65E (RPO M32), was phased in the 2001 model year when coupled behind the 6.0 Vortec. Five-pinion front and rear planetaries, along with an additional 3/4 clutch allowing 7 clutches in the input housing and induction hardened input shaft assembly, were improved to withstand up to 380 ft⋅lb (520 N⋅m) of torque.

Applications:

See also

Related Research Articles

<span class="mw-page-title-main">General Motors LS-based small-block engine</span> Family of V8 and V6 engines

The General Motors LS-based small-block engines are a family of V8 and V6 engines designed and manufactured by American automotive company General Motors. First introduced in 1997, the family is a continuation of the earlier first- and second-generation Chevrolet small-block engine, of which over 100 million have been produced altogether, and is also considered to be one of the most popular V8 engines ever. Spanning three generations, a new, sixth generation is expected to enter production soon. Various small-block V8s were and still are available as crate engines.

<span class="mw-page-title-main">Chevrolet Suburban</span> Series of American full-size automobiles by General Motors

The Chevrolet Suburban is a series of automobiles built by the Chevrolet division of General Motors. In production since the 1935 model year, the model line is currently in its twelfth generation; it is the longest-used automobile nameplate in the world. Beginning life as one of the first metal-bodied station wagons, the Suburban is the progenitor of modern full-size SUVs, combining a station wagon body with the chassis and powertrain of a pickup truck. Alongside its Advance Design, Task Force, and C/K predecessors, the Silverado pickup trucks share chassis and mechanical commonality with the Suburban.

<span class="mw-page-title-main">Chevrolet Tahoe</span> American sport utility vehicle

The Chevrolet Tahoe, and its badge-engineered GMC Yukon counterpart, are full-size SUVs from General Motors, offered since 1994 and 1991, respectively. Since 1982, Chevrolet and GMC sold two different-sized SUVs under their "Blazer" and "Jimmy" nameplates, by introducing the smaller S-10 Blazer and GMC S-15 Jimmy for the 1983 model year, below the full-size Blazer and Jimmy models. This situation lasted into the early 1990s. GMC first rebadged the full-size Jimmy as the "Yukon" in 1991. Chevrolet however waited until 1994, when they rebadged the redesigned mid-size S-10 Blazer the "new Blazer," while renaming the full-size Blazer as the "Tahoe." The name Tahoe refers to the rugged and scenic area surrounding Lake Tahoe in the western United States, and was originally used as a trim level on S-10 models. The name Yukon refers to the Yukon territory of northern Canada.

<span class="mw-page-title-main">Cadillac V8 engine</span> Reciprocating internal combustion engine

The term Cadillac V8 may refer to any of a number of V8 engines produced by the Cadillac Division of General Motors since it pioneered the first such mass-produced engine in 1914.

<span class="mw-page-title-main">TorqueFlite</span> Automatic transmission made by Chrysler

TorqueFlite is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name.

Turbo-Hydramatic or Turbo Hydra-Matic is the registered tradename for a family of automatic transmissions developed and produced by General Motors. These transmissions mate a three-element turbine torque converter to a Simpson planetary geartrain, providing three forward speeds plus reverse.

The TREMEC T-5 is a 5-speed manual transmission for longitudinal engine automobiles. It includes one overdrive gear, a lightweight aluminum housing, and adaptability for four wheel drive use. It is currently manufactured by TREMEC.

<span class="mw-page-title-main">GM 6L80 transmission</span> Motor vehicle

The 6L80 is a six-speed automatic transmission built by General Motors at its Willow Run Transmission plant in Ypsilanti, MI. It was introduced in late 2005, and is very similar in design to the smaller 6L45/6L50, produced at GM Powertrain in Strasbourg, France. It features clutch to clutch shifting, eliminating the one-way clutches used on older transmission designs. In February 2006 GM announced that it would invest $500 million to expand the Toledo Transmission plant in Toledo, Ohio to produce the 6L80 in 2008. Torque rating 440 ft/lb. 6L90 1220ft/lb.

The 4L80-E is a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series included 4 forward gears. It was the 4-speed electronically commanded evolution of the 3-speed Turbo-Hydramatic 400, first produced in October 1963. 4L80-Es were optioned only in Chevrolet/GMC pickups, vans, and commercial vehicles, and the Hummer H1. It was also adopted by Rolls-Royce in 1991 and modified after extensive testing, and used initially in the Bentley Continental R, and subsequently other Rolls-Royce and Bentley vehicles. The 4L80 and 4L85 were built at Willow Run Transmission in Ypsilanti, Michigan.

The 4T60-E is a series of automatic transmissions from General Motors. Designed for transverse engine configurations, the series includes 4 forward gears. The 4Txx family is an evolution of the original Turbo-Hydramatic 125 transverse automatic introduced in the late 1970s and the Turbo-Hydramatic 440 transmission developed in the mid-1980s.

The New Venture Gear 3500, commonly called NV3500, is a 5-speed overdrive manual transmission manufactured by New Venture Gear and used by GM and Dodge in compact and full-size light trucks.
It can be identified by its two-piece aluminum case with integrated bell housing and top-mounted tower shifter.

The New Venture Gear 4500, colloquially known as NV4500, is a 5-speed manual transmission manufactured by New Venture Gear and used in General Motors and Chrysler products from 1991 to 2007.

The AY-6 is a 6-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 345 ft·lbf (468 N·m) of torque.

<span class="mw-page-title-main">Detroit Diesel V8 engine</span> Reciprocating internal combustion engine

The General Motors–Detroit Diesel V8 engine is a series of diesel V8 engines first introduced by General Motors for their C/K pickup trucks in 1982. Developed in collaboration with Detroit Diesel, the engine family was produced by GM through 2002, when it was replaced by the new Duramax line. AM General's subsidiary General Engine Products (GEP) still produces a military variant of this engine for the HMMWV.

The 6L50 is a 6-speed longitudinally-mounted automatic transmission produced by General Motors. It is very similar in design to the larger 6L80/6L90, and is produced at GM Powertrain plants in Toledo, Ohio; Silao, Guanajuato, Mexico; and by the independent Punch Powerglide company in Strasbourg, France. This transmission features clutch to clutch shifting, eliminating the bands used on older transmission designs. The 6L50 debuted for the 2007 model year on the V8-powered versions of the Cadillac STS sedan and Cadillac SRX crossover, and replaces the 5L40-E and 5L50 in GM's lineup. The 6L45 version is used in certain BMW vehicles and the Cadillac ATS, as part of either rear-wheel drive and all-wheel drive powertrains.

Vehicles made by American Motors Corporation (AMC) and Jeep incorporated a variety of transmissions and transfer case systems. This article covers transmissions used in the following vehicle models and years:

The GM 10.5" 14-bolt differential stands as a robust drivetrain component extensively featured in Chevrolet and GMC trucks, SUVs, and vans from 1973 onward, including specific versions of the Cadillac Escalade. Introduced in 1973, this differential employs a full-floating design, boasting a substantial ring gear diameter measuring 10.5 inches. Its nomenclature, "14-bolt," represents the 14 bolts securing the differential cover, although the ring gear itself is fastened by 12 bolts. Notably, the 14-bolt differential gained traction among Jeep Wrangler owners seeking axle replacement options, earning the moniker "corporate" 14-bolt because of its association with GM's corporate structure during the 1970s.

<span class="mw-page-title-main">Chevrolet 90° V6 engine</span> Former American engine

The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu. The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans. Its phaseout marks the end of an era of Chevrolet small-block engine designs dating back to the 1955 model year. A new Generation V 4.3 L (262 cu in) V6 variant entered production in late 2013, based on the LT1 small block V8 and first used in the 2014 Silverado/Sierra 1500 trucks.

<span class="mw-page-title-main">Chevrolet C/K (fourth generation)</span> American truck series

The fourth generation of the C/K series is a range of trucks that was manufactured by General Motors. Marketed by the Chevrolet and GMC brands from the 1988 to the 2002 model years, this is the final generation of the C/K model line. In a branding change, GMC adopted the GMC Sierra nameplate for all its full-size pickup trucks, leaving the C/K nomenclature exclusive to Chevrolet.

<span class="mw-page-title-main">Chevrolet Silverado (first generation)</span> GMT800 trucks by General Motors

The first generation of the Chevrolet Silverado is a series of trucks manufactured by General Motors from 1998 until 2007 under the Chevrolet brand and also as the GMC Sierra. Built on the new GMT800 platform, the Silverado/Sierra 1500 and 2500 pickup trucks were first released in August 1998 as 1999 models. The "classic" light-duty GMT400 C/K trucks were kept in production alongside the new types for the first model year, while the heavy-duty GMT400 pickups were continued until 2000, with the new GMT800 Silverado/Sierra HD released in model year 2001. A 3500 model was added later for 2001, with the introduction of the HD moniker. A refresh for 2003 models was introduced in 2002, bringing slight design changes and an upgrade to the audio and HVAC controls. The 2007 GMT800 trucks, built after the new GMT900 had gone on sale, used the name Classic to denote the difference between the two generations.

References

  1. "4L60E Identification + Specs | GM Transmission Resource". GM Transmission Resource. 17 May 2016. Retrieved 2017-04-28.
  2. "1995 Chevrolet Tahoe Vehicle Information Kit" (PDF). GM Heritage Center. Retrieved 2022-06-29.[ dead link ]