The Gairloch Bridge is a low level road bridge across the lower Herbert River near Ingham in North Queensland. Completed in November 1891, it was an innovative design by the prominent Queensland Government Architect and bridge engineer, Alfred Barton Brady.[1]
The Herbert River valley was first occupied by pastoralists in the mid-1860s. Sugarcane farming, now the dominant industry in the area, commenced during the early 1870s. By the late 1880s, the Ingham area had become one of Queensland's top sugar producers with some five mills operating in the Herbert River district.[1]
From as early as 1885 the Hinchinbrook Divisional Board and residents of the area called for the Queensland Government to construct a bridge across the Herbert River to improve access for growers on the north side of the river to the region's seaport south of the river mouth at Dungeness. Unsuccessful in persuading the government to fund the construction, the board decided to raise the finance itself, and in June 1888 asked the Government Engineer for Bridges to prepare plans for the bridge.[1]
The bridge was designed by Alfred Barton Brady, an English-born civil engineer and architect who migrated to Australia in 1884. From 1885 he held a position as Assistant Engineer for Bridges with the Railways Department in Queensland before being appointed Acting Engineer for Bridges in the Department of Mines and Works in June 1889. In the Department of Mines and Works and its successor departments, Brady had a distinguished career rising to the position of Government Architect and Engineer of Bridges in 1892 and Undersecretary in 1901. He held this position until his retirement in 1922.[1]
The contract for construction of the bridge was awarded to James Graham of South Brisbane who commenced work early in 1890. Following a number of delays, partly caused by the frequent flooding of the river, the bridge was completed at a cost of £7,737 and opened for traffic on 4 November 1891.[1]
The Gairloch Bridge was the first road bridge designed by Brady as Engineer for Bridges in the Department of Mines and Works. Other bridges designed by him included the Burnett River Bridge at Bundaberg, Victoria Bridge in Brisbane (no longer extant), and the Lamington Bridge in Maryborough (1896). The Lamington Bridge was a Wunsch-system structure of reinforced concrete, the first such design in Australia.[1]
The bridge at Gairloch, which pre-dates the Lamington Bridge by five years, demonstrates one of the earliest uses of concrete in bridge construction in Queensland. Prior to the introduction of reinforced concrete to Australia in the 1890s, concrete as a component of bridges took the form of un-reinforced abutments, piers and mass concrete culverts, the earliest known being railway culverts constructed in South Australia in 1878. In 1882, concrete culverts were used on the Warwick-to-Stanthorpe railway line in Queensland. The original bridge across the railway in Edward Street Brisbane, designed by FDG Stanley in 1887 had concrete abutments. The concrete piers and abutments of the Gairloch Bridge, designed in 1889, are among the earliest known in Queensland. From c.1890, the greater availability of locally made Portland cement made the use of this material in bridge construction much more common.[1]
The Gairloch Bridge is a submersible bridge designed to withstand inundation during major floods. It is the first submersible road bridge known to have been designed by Brady who is recognised for his important contributions to the development of this type of bridge. The shorter, submersible bridges were a cost-effective alternative to designing longer bridges above major flood levels, which often inundated a considerable area either side of the river. The principal difficulty of submersible bridges was that debris accumulated against the bridge during floods and this, in combination with the force exerted by the water, could cause major damage. Brady developed designs to avoid trapping debris and to present the least possible obstruction to the flow of flood waters. To date, it remains common practice to design less important bridges to withstand flood submergence.[1]
The Gairloch Bridge incorporated a number of features that were innovative at the time. For the decking, Brady used 33-foot (10m) lengths of steel trough plate, 12 inches (300mm) deep, riveted together and securely bolted down to the concrete string-courses. The troughs were then filled with tarred metal. The curbs and posts were of hardwood. Brady argued that this design had important advantages in flood conditions due to its greater weight and because the steel troughs eliminated the need for girders, the bridge offered less resistance to the flow of flood waters. This design option was more costly than a bridge using the more conventional timber decking and superstructure, but Brady argued that the maintenance cost of his design would be less. The Gairloch Bridge is the only known road bridge of this design in Queensland.[1]
Against the expectations of its designer, the bridge did not perform well initially. On 11 June 1892, The Queenslander reported that it required "rather a large amount of money to keep it in repair". A major flood in 1894 resulted in two sections of iron troughing being lifted and doubled over by the force of the flood. This necessitated the complete renewal of the roadway with layers of concrete and tarred metal. Then, in 1927, a record flood completely destroyed the northern approach to the bridge. In 1929, the bridge roadway was resurfaced and the hardwood curbing was replaced with concrete.[1]
The inconvenience incurred by the periodic inundation of the bridge eventually prompted the construction of two high-level bridges across the lower Herbert River: one linking Halifax with Macknade and Ripple Creek in 1927; and in the late 1960s another was built upstream from the Gairloch Bridge. Despite its early set-backs, the 1891 low-level bridge has survived in the long-term and this has been attributed to its innovative design, which presents a small obstruction to flood flow. The bridge continues to be used.[1]
Description
The Gairloch Bridge is a low level concrete bridge. It is simple and unadorned in appearance with no posts or balustrades.[1]
The superstructure has the appearance of a shallow concrete slab about 5.7 metres (19ft) wide. The roadway atop this slab is edged with concrete curbing and covered with worn bitumen. At each end of the bridge, there is a pair of reflective guide posts fixed into the curb, one on each side of the road. The steel plates that make up the base of the superstructure are clearly visible on its underside.[1]
Fourteen concrete pillars support the superstructure. These taper slightly from a wide base and are curved in cross-section in the direction of water flow. There is a wide raised band around the base of each pillar and a narrow band around the top. The cement that is an element of the pillars has eroded, exposing the pebbles that form part of the concrete's composition.[1]
At the southern end of the bridge, the road passes through a deep cutting. The sides of the cutting are lined with sections of brick, stonework or loose rocks. Some of the stonework and bricks are coated with cement.[1]
The bridge crosses the Herbert River at a point where, for most of the year, it is wide but quite shallow. Dense vegetation covers the river banks at either end of the bridge.[1]
The place is important in demonstrating the evolution or pattern of Queensland's history.
Gairloch Bridge, constructed in 1890-1891, is important in demonstrating the pattern of settlement in North Queensland in the late nineteenth century. By the late 1880s, the Herbert River valley was one of Queensland's most important sugar producing areas. As the first bridge across the lower Herbert River, built to provide access to the region's port for growers on the north side of the river, the Gairloch Bridge is closely associated with the establishment of this important industry in northern Queensland.[1]
As an early, experimental submersible bridge, the Gairloch Bridge is important in demonstrating the evolution of bridge design in Queensland and exemplifies how the colonial authorities responsible for bridge building responded to the extreme conditions of the north Queensland wet season. Submersible bridges evolved as a cost-effective solution to the problem of bridging rivers that were seasonally subject to extreme flooding, and remain common in Queensland.[1]
As one of the state's earliest extant bridges incorporating concrete, the bridge also demonstrates the evolution of the use concrete in bridge construction in Queensland. The Gairloch Bridge is an example of the earliest use of concrete, where it was restricted to applications requiring only compressive strength such as piers and abutments. The introduction to Queensland of reinforced concrete a few years after the bridge was built broadened the applications of concrete to include components requiring tensile strength.[1]
The place is important in demonstrating the principal characteristics of a particular class of cultural places.
The Gairloch Bridge is important in demonstrating the principal characteristics of submersible bridges: it is a low level bridge, crossing only the main channel of the river, and is designed to present the least possible obstruction to flood waters and debris.[1]
The bridge is also important as the earliest known example in Queensland of a road bridge designed by the notable architect and engineer, AB Brady. The bridge was designed soon after his appointment as Engineer of Bridges in the Department of Mines and Works. Other important bridges designed by Brady include the third Victoria Bridge in Brisbane (no longer extant) and the Lamington Bridge in Maryborough (1896, Lamington Bridge).[1]
The place is important in demonstrating a high degree of creative or technical achievement at a particular period.
The Gairloch Bridge is important in demonstrating a high degree of technical innovation for its time. The key design feature of the bridge is its superstructure. Steel troughs were placed longitudinally on concrete piers to form the decking of the bridge while at the same time acting as structural members. This eliminated the need for girders, thereby reducing obstruction to flood borne debris. The design is also innovative for its early use of concrete in the piers, abutments and string courses.[1]
Albert Bridge is a heritage-listed railway bridge of steel truss design crossing the Brisbane River between Indooroopilly and Chelmer in the City of Brisbane, Queensland, Australia. It was designed by Henry Charles Stanley and built from 1894 to 1895 by John McCormick & Son. It was added to the Queensland Heritage Register on 21 October 1992.
Dickabram Bridge is a heritage-listed road-and-rail bridge over the Mary River between Miva and Theebine, both in the Gympie Region, Queensland, Australia. It was the major bridge on the Kingaroy railway line. It was designed by Henry Charles Stanley and built from 1885 to 1886 by Owen McDermott & Co. It is also known as Mary River Bridge (Miva). The bridge was registered on the former Register of the National Estate in 1988. It was added to the Queensland Heritage Register on 21 October 1992.
Lamington Bridge is a heritage-listed road bridge over the Mary River from Gympie Road, Tinana to Ferry Street, Maryborough, both in the Fraser Coast Region, Queensland, Australia. It was designed by Alfred Barton Brady and built from c. 1896 to 1970 by McArdle & Thompson. It was added to the Queensland Heritage Register on 21 October 1992.
The Nepean River railway bridge is a heritage-listed railway bridge that carries the Main Southern railway line across Menangle Road and the Nepean River located at the outer south-western Sydney settlement of Menangle in the Wollondilly Shire local government area of New South Wales, Australia. It was designed by John Whitton as the Engineer-in-Chief, of the New South Wales Government Railways and NSW Department of Public Works. The railway bridge was built from 1863 to 1863 by Messers Peto, Brassey and Betts. It is also known as Menangle rail bridge over Nepean River and Menangle Railway Bridge. The property is owned by RailCorp, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 2 April 1999.
Lockyer Creek Railway Bridge is a heritage-listed railway bridge on the Toowoomba–Helidon line over Lockyer Creek at Murphys Creek, Lockyer Valley Region, Queensland, Australia. It was designed by William Pagan and built from c. 1910 to 1911. It was added to the Queensland Heritage Register on 21 October 1992.
Lockyer Creek Railway Bridge (Lockyer) is a heritage-listed railway bridge on the Toowoomba - Helidon railway line over Lockyer Creek at Lockyer, Lockyer Valley Region, Queensland, Australia. It was designed by William Pagan and built from 1909 to 1910. It was added to the Queensland Heritage Register on 21 October 1992.
Sadliers Crossing Railway Bridge is a heritage-listed railway bridge at over Bremer River between Tallon Street, Sadliers Crossing and Dixon Street, Wulkuraka, Queensland, Australia on the Main Line (this section is now the Ipswich and Rosewood railway line. It was added to the Queensland Heritage Register on 13 November 2008.
Victoria Bridge Abutment is a heritage-listed road bridge remnant at 74 Stanley Street, South Brisbane, City of Brisbane, Queensland, Australia. It was designed by Alfred Barton Brady and built in 1896 by Arthur Midson. It was added to the Queensland Heritage Register on 21 August 1992.
Bremer River Rail Bridge is a heritage-listed railway bridge at off Bremer Street, North Ipswich, City of Ipswich, Queensland, Australia. It was built from 1865 to 1915. It was added to the Queensland Heritage Register on 11 December 2006.
Harlin Rail Bridge is a heritage-listed railway bridge over Ivory Creek at Harlin, Somerset Region, Queensland, Australia. It was designed by Queensland Railways and built in 1910 by Queensland Railways. It was added to the Queensland Heritage Register on 27 November 2008. It was destroyed in 2013 as a consequence of flooding associated with Cyclone Oswald.
Burnett Bridge is a heritage-listed road bridge crossing the Burnett River from Quay Street, Bundaberg Central to Perry Street, Bundaberg North in Bundaberg, Bundaberg Region, Queensland, Australia. It was designed by Alfred Barton Brady and built in 1900. It is also known as Burnett River Traffic Bridge. It was added to the Queensland Heritage Register on 21 October 1992.
Alfred Barton Brady was an engineer and architect in Queensland, Australia. He was one of Queensland's most important early engineers and was particularly known for his bridge design. He was the Queensland Colonial Architect and many of his buildings and structures are now heritage-listed.
Alexandra Railway Bridge is a heritage-listed railway bridge adjacent to North Street, Rockhampton, Rockhampton Region, Queensland, Australia. It was designed by Henry Charles Stanley and built from 1898 to 1899 by George Charles Willcocks. It was added to the Queensland Heritage Register on 21 October 1992.
Burdekin River Rail Bridge is a heritage-listed former railway bridge on the Great Northern railway over the Burdekin River at Dotswood, Charters Towers Region, Queensland, Australia. It was designed by Henry Charles Stanley and built from c. 1896 to 1899 by Swanson Brothers. It is also known as Macrossan Bridge. It was added to the Queensland Heritage Register on 21 October 1992.
Deep Creek Railway Bridge is a heritage-listed railway bridge on the Mungar-Monto railway line in Didcot, North Burnett Region, Queensland, Australia. It was designed by William Pagan and built in 1905 by day labour. It was added to the Queensland Heritage Register on 21 October 1992.
Steep Rocky Creek Railway Bridge is a heritage-listed railway bridge on the Mungar - Monto railway line at Ideraway in the North Burnett Region of Queensland, Australia. It was designed by William Pagan and built from 1906 to 1907. It was added to the Queensland Heritage Register on 21 October 1992.
Humphery Railway Bridge is a heritage-listed railway bridge on the Mungar to Monto railway line at Humphery, North Burnett Region, Queensland, Australia. It was designed by William Pagan and built in 1913. It was added to the Queensland Heritage Register on 21 October 1992.
Angellala Rail Bridge is a heritage-listed railway bridge on the Roma-Cunnamulla railway line over Angellala Creek in Sommariva in the Shire of Murweh, Queensland, Australia. It was designed by Henry Charles Stanley and built from c. 1885 to 1994. It was added to the Queensland Heritage Register on 21 October 1992.
The Yowaka River bridge is a heritage-listed road bridge that carries the Princes Highway across the Yowaka River at Greigs Flat on the Bega Valley Shire local government area of New South Wales, Australia. It was built in 1936. The bridge is also known as the Yowaka Bridge near Eden. The property is owned by Roads and Maritime Services, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 20 June 2000.
The McKanes Falls Bridge is a heritage-listed road bridge at McKanes Falls Road, South Bowenfels, City of Lithgow, New South Wales, Australia. It was designed by John McDonald and NSW Engineer for Bridges and built from 1892 to 1893 by NSW Public Works. It is also known as McKanes Bridge. The property is owned by Roads and Maritime Services, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 20 June 2000.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
