The German Clock Museum is devoted to the history of timekeeping devices. A major focus is on clockmaking in the Black Forest, both as a cottage industry and on an industrial scale. The museum has an extensive collection of clocks and other artefacts relating to horology, not just those from the Black Forest, but also clocks and watches from around the world and spanning from prehistoric times to the present. The collection includes early cuckoo clocks from the 18th century as well as the prototypes of the modern Black Forest souvenir. The work of Robert Gerwig formed a primary basis of the museum.
Deutsches Uhrenmuseum in Furtwangen
Chronology
1852: Robert Gerwig, Director of the Grand Ducal Baden Clockmaking School in Furtwangen, began to collect old clocks as witnesses of traditional handicrafts.
1858: The collection is exhibited for the first time at the Black Forest Industry Exhibition in Villingen.
1874: Historical clocks together with contemporary products of the region are put on display in the newly built trade hall.
1925: The first printed collection catalogue of the Adolf Kistner Historical Clock Collection already lists over 1,000 clocks.
1959: A new building is opened on the site of the old wooden building that had fallen into decay.
1975: The state of Baden-Württemberg purchases the important clock collection from the Kienzle clock factories and transfers it to the museum. Due to the expansion of its collection to include pocket watches and Renaissance clocks, the "Historic Clock Collection" is renamed in 1978 to the "German Clock Museum".
1992: The current museum building is opened. Today, the German Clock Museum is part of Furtwangen University.[5]
Exhibition of Black Forest clocks and tower clocks
Exhibits
Since 2010, the museum has put on a permanent exhibition, covering an area of 1,400 square metres, of the development of clocks and the concept of timekeeping in Western countries.[6] In addition to improvements in the accuracy of timepieces, it also demonstrates the various requirements that clocks and watches met in order to satisfy the needs of the time. Thus, in addition to prize exhibits, the museum also displays objects that, despite their low value, were historically very important. This distinguishes the German Clock Museum from clock collections that display objects that were rather rare and expensive compared with those in typical everyday use.
The circular tour is divided into the sections covering the following themes:
History of Clocks and Time up to Industrialisation;
Black Forest Clocks;
Pocket Watches and Wristwatches;
Modern Times and Mechanical Musical Instruments.
History of Clocks and Time up to Industrialisation
Until well into the 20th century, clocks were based on the (apparent) course of the sun and the stars in the sky. This connexion is clearly built into the works of the priest-mechanics of the 18th century with their clockwork models of the cosmos.
In addition to the astronomic calendar clock of Benedictine father and later mathematics professor, Thaddäus Rinderle, of 1787 (Inv. 16-0033), the Copernican Planetarium (Inv. 43-0002, 1774) and a globe clock (Globenuhr, Inv. 43-0001, before 1788) by Philipp Matthäus Hahn are part of the collection.
Renaissance clock, Hans Koch, around 1580 (K-1288)
Ivory sundial, Paulus Reinmann, Nuremberg, 1605 (Inv. 2003-074)
Grandfather clock face with display of true time, William Scafe, around 1730 (Inv. 2009-054)
Tête de Poupée, Balthazar Martinot, around 1700 (Inv. 2004-119)
Astronomic calendar clock, around 1760-1770 (Inv. 16-0014)
Early German precision pendulum clock based on a design by Ignaz Pickel, 1775 (Inv. 2010-051)
Wooden clocks from the Black Forest
In the 18th and 19th centuries, the Black Forest supplied the world with low cost clocks. In many small clockmaking workshops, clocks with wooden movements were made which, thanks to the cheap raw material, the use of special tools and machines and specialised craftsmen, were inexpensive and faced no real competition.
A wooden clock face with a white background and colourfully painted motif decorated the Black Forest clocks during the whole of the 19th century. With a colourless, protective varnish the clock faces were resistant to moisture and dirt. From the second half of the 18th century, the varnished plate clock (Lackschilduhr) dominated the European market. Later, it found its way overseas and to the Far East. The design of the clock plate varied depending on the country being exported to. Black Forest traders, the clock carriers (Uhrenträger), sold the clocks locally.
Selected examples
Wooden cogwheel clock with figure of Madonna, around 1760 (Inv. 16-0519)
Musical clock with a Baroque face by Matthias Faller (?), around 1770-1780 (Inv. 14-0044)
Cuckoo clock, Johannes Wildi, around 1780 (Inv. 2008-024)
Painted clock (Lackschilduhr) for the French market, Joseph Hummel, around 1840(Inv. 04-0616)
Railway clock for a small station to a design by Friedrich Eisenlohr, Kreuzer, Glatz & Co., ca. 1853/54 (Inv. 2003-081)
Knödelesser figurine clock, Anton Häckler, around 1870 (Inv. 06-2080)
Clock industry in the Black Forest
In the second half of the 19th century, clock factories displaced the traditional manufacture of clockmaking in the home. Initially relatively small firms emerged that specialised in the production of short runs of qualitatively high value clocks based on the traditional prototype. Over time the factories that became successful were those, especially in the Württemberg (eastern) half of the Black Forest and neighbouring Baar region, that embraced new types of clock, like alarm clocks, that were suited to industrial processes. In most households there was a clock suited to each room, from the alarm clock to the kitchen clock to the sideboard or wall clock.
Selected examples
"Bürk Patent" watchman's clock, around 1860 (Inv. 2007-109)
Nutmeg alarm clock and W10 movement, Junghans, around 1890 (Inv. 2010-021)
Movement for a Dutch hall clock, L. Furtwängler Söhne, around 1905 (Inv. 16-0663)
In the 16th and 17th centuries the sometimes voluminous neck clocks (Halsuhren) were more of an expensive piece of jewellery than an accurate timepiece. Not until the time around 1800 were the first pocket watches available for the landed gentry and for science, but at best they displayed minutes. As a result of industrial manufacturing in the second half of the 19th century, however, the pocket watch became an everyday item.
Selected examples
Neck clock with alarm, Johannes Reinbold, around 1600 (Inv. K-0473)
Gold pocket watch, Balthasar de Paep, around 1600 (K-0458)
Pocket watch, L'Epine, around 1760 (K-0545)
"Revolution" pocket watch (Revolutionstaschenuhr), conventional and decimal display, around 1795 (K-0714)
Finger ring with watch, around 1800 (Inv. K-1369)
Pocket chronometer, Friedrich Gutkaes, around 1820 (Inv. K-0746)
The monumental musical automaton clock of ca. 1880 by August Noll
A mechanical orrery (planetarium) and a Weltmaschine by "Priestermechaniker" Philipp Matthäus Hahn[10]
One of the early clocks (Paris, 1680) using a pendulum as a time standard, an invention of Christiaan Huygens
Several large mechanical musical instruments (street organs )
An extensive display documenting the history of the cuckoo clock and the many styles of cuckoo clocks made over time
An easy-to-follow but comprehensive display outlining the history of the wristwatch[11]
Tourism and visitors
Interactive guided tour
Around one third of visitors book a personal guided tour during which clocks and musical instruments are set in motion. Especially during the holidays children may build and decorate a clock in the "clock workshop". For school classes, the museum offers themed workshops in modules, some of which are designed to match the education syllabus. The collection has 8,000 items and about 1,300 clocks are permanently displayed. As well as clocks, the collection includes a company documents archive and a specialist library of German-language literature.
In 2006, the museum was one of 365 places selected to represent Germany in the federal chancellor's competition Land of Ideas. In 2008, the museum was awarded the distinction of being an "anchor point on the European Route of Industrial Heritage". At the same time, the museum became a milestone on the German Clock Road that links places in the region associated with clockmaking.
In 2010, the museum had 60,000 visitors.
Similar museums
Postcard: home effort and home industry in the Black Forest – III. Clock making in the Black Forest
↑ Ausführlich zur Geschichte des Museums: Simone von der Geest: "Aufbewahren und Versinnlichen", Das Deutsche Uhrenmuseum Furtwangen entwickelt sich seit 150 Jahren. Museum Aktuell, September 2002, pp. 3583–3586.
↑ Lange, Juergen; Richard Muehe (1995). Die Hans-Lang Uhr – Sonderausstellung im Deutschen Uhrenmuseum Furtwangen. Furtwangen: Deutsches Uhrenmuseum. p.32.
↑ Graf, Johannes (2006). Modern Times – Timekeeping on its way to the present. Furtwangen: Deutsches Uhrenmuseum. p.40. ISBN3-922673-19-8.
↑ Wenzel, Johann (2006). Die astronomisch-geographische Uhr von Pater Thaddãus Rinderle, im Anhang eine kurze Geschichte der Uhr, sowie ein Facsimile und die Transdskription von Thaddaeus Rinderles eigenhaendiger Beschreibung der Uhr durch Eberhard Marthe. Furtwangen: Deutsches Uhrenmuseum. p.77. ISBN3-922673-20-1.
↑ Haas, Carmen; Eduard Saluz (2007). A Brief History of Clock and Time. Furtwangen: Deutsches Uhrenmuseum. p.40. ISBN978-3-922673-23-1.
↑ Hundorf, Kathrin; Eduard Saluz (2004). A Brief History of the wristwatch. Furtwangen: Deutsches Uhrenmuseum. p.40. ISBN3-922673-16-3.
A watch is a portable timepiece intended to be carried or worn by a person. It is designed to keep a consistent movement despite the motions caused by the person's activities. A wristwatch is designed to be worn around the wrist, attached by a watch strap or other type of bracelet, including metal bands, leather straps, or any other kind of bracelet. A pocket watch is designed for a person to carry in a pocket, often attached to a chain.
A cuckoo clock is a type of clock, typically pendulum driven, that strikes the hours with a sound like a common cuckoo call and has an automated cuckoo bird that moves with each note. Some move their wings and open and close their beaks while leaning forwards, whereas others have only the bird's body leaning forward. The mechanism to produce the cuckoo call has been in use since the middle of the 18th century and has remained almost without variation.
Furtwangen im Schwarzwald is a small city located in the Black Forest region of southwestern Germany. Together with Villingen-Schwenningen, Furtwangen is part of the district of Schwarzwald-Baar.
In horology, a complication is any feature of a timepiece beyond the display of hours, minutes and seconds. A timepiece indicating only hours, minutes and seconds is known as a simple movement. Common complications include date or day-of-the-week indicators, alarms, chronographs (stopwatches), and automatic winding mechanisms. Complications may be found in any clock, but they are most notable in mechanical watches where the small size makes them difficult to design and assemble. A typical date-display chronograph may have up to 250 parts, while a particularly complex watch may have a thousand or more parts. Watches with several complications are referred to as grandes complications.
The history of watches began in 16th-century Europe, where watches evolved from portable spring-driven clocks, which first appeared in the 15th century.
Peter Henlein, a locksmith, clockmaker, and watchmaker of Nuremberg, Germany, is often considered the inventor of the watch. He was one of the first craftsmen to make small ornamental portable clocks which were often worn as pendants or attached to clothing, and which are regarded as the first watches. Many sources also erroneously credit him as the inventor of the mainspring.
The British Horological Institute (BHI) is the representative body of the horological industry in the United Kingdom. It was founded by a group of clockmakers in 1858, and has its current premises at Upton Hall in Nottinghamshire, which includes a museum of clock history.
The National Watch and Clock Museum (NWCM), located in Columbia, Pennsylvania, is one of a very few museums in the United States dedicated solely to horology, which is the history, science and art of timekeeping and timekeepers.
Deutsche Gesellschaft für Chronometrie (DGC), today is an organization of scholars, collectors and enthusiasts in Germany interested in the science, art and history of horology.
The Riefler escapement is a mechanical escapement for precision pendulum clocks invented and patented by German instrument maker Sigmund Riefler in 1889. It was used in the astronomical regulator clocks made by his German firm Clemens Riefler from 1890 to 1965, which were perhaps the most accurate all-mechanical pendulum clocks made.
The history of timekeeping devices dates back to when ancient civilizations first observed astronomical bodies as they moved across the sky. Devices and methods for keeping time have gradually improved through a series of new inventions, starting with measuring time by continuous processes, such as the flow of liquid in water clocks, to mechanical clocks, and eventually repetitive, oscillatory processes, such as the swing of pendulums. Oscillating timekeepers are used in modern timepieces.
The Uhrenmuseum Beyer is located in the heart of the city of Zürich, Switzerland, and is one of the world's leading private museums dedicated to horology.
The Dorf- und Uhrenmuseum Gütenbach is located in the village of Gütenbach, one of the historic centers of homebased manufacturing of clocks in the Black Forest region of Germany near the town of Furtwangen im Schwarzwald. It features primarily permanent and temporary exhibits on the local history of clockmaking, focussing on the history of making wooden clock movements. There also is a smaller general display on local history and rural living conditions in the 18th and 19th century.
The American Clock & Watch Museum (ACWM), located in Bristol, Connecticut, is one of a very few museums in the United States dedicated solely to horology, which is the history, science and art of timekeeping and timekeepers. Located in the heart of the historic center of American clockmaking, ACWM is the world's preeminent horological museum in the area of American clocks, primarily industrial-made clocks of the 19th and early 20th century.
The Cuckooland Museum, previously known as the Cuckoo Clock Museum, was a museum that exhibited mainly cuckoo clocks, located in Tabley, Cheshire, England. The collection comprised 300 years of cuckoo clock-making history, since the earliest examples made in the 18th to the 21st century.
Craftsmanship of Black Forest clockmakers dates back to mid of the 17th century. A specialized branch of Black Forest clockmakers are the manufacturers of cuckoo clocks.
The German Clock Road or German Clock Route is a holiday route that runs from the Central Black Forest through the Southern Black Forest to the Baar region and thus links the centres of Black Forest clock manufacturing. It is about 320 kilometres (200 mi) long.
The Dingwall Beloe Lecture Series is the result of bequests by Eric Dingwall, formerly an Assistant Keeper of Printed Books in the British Museum, and to the Clockmakers Company by Reginald Beloe TD, the noted horological collector and Master of the Company in 1977.
Temption GmbH is a manufacturer of mechanical wristwatches. The company is based in Herrenberg, Germany.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
