GlaStar | |
---|---|
GlaStar | |
Role | Amateur-built aircraft |
National origin | United States |
Manufacturer | Stoddard-Hamilton Aircraft Glasair Aviation |
Designer | Tom Hamilton |
First flight | 1994 |
Status | Production completed circa 2005 |
Number built | 300 (2004) [1] |
Variants | Symphony SA-160 Glasair Sportsman 2+2 Plane Driven PD-1 |
The Glasair GlaStar (sometimes Glastar) is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction. [2] [3] [4]
The GlaStar features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cockpit accessed via doors, fixed tricycle landing gear or conventional landing gear and a single engine in tractor configuration. [2] [4]
The aircraft is made with a welded steel fuselage, with a fiberglass covering and aluminum wings. Its 35 ft (10.7 m) span wing employs a NASA GA(W)-2 airfoil at the wing root, with a NASA GA(W)-2 mod at the wing tip. The wings have an area of 128 sq ft (11.9 m2), mount flaps and can be folded for ground transportation or storage. The acceptable power range is 100 to 180 hp (75 to 134 kW) and early engines used included the 100 hp (75 kW) Rotax 912ULS. The aircraft proved underpowered with the Rotax, and later the 150 to 160 hp (112 to 119 kW) Lycoming O-320 and the 180 hp (134 kW) Lycoming O-360 four-stroke powerplants were used. The landing gear can be rapidly converted between tricycle and taildragger configurations. The cockpit is 44 in (110 cm) wide and includes a large baggage area that will accommodate 200 lb (91 kg) of cargo. [2] [4] [5]
Initial factory estimated construction time was 1200 hours. [3]
In 1996, a service recall was issued for the control yoke assembly of select GlaStar kits. [6] In 1999, one of the GlaStar kits not included in the recall crashed, killing its two occupants. [7]
Data from Bertrand and Kitplanes [2] [3]
General characteristics
Performance
The Bearhawk, now also called the Bearhawk Four, is an American amateur-built aircraft, designed by Bob Barrows and produced by Bearhawk Aircraft of Fairview, OKlahoma. The aircraft is supplied as a kit or as plans for amateur construction.
The Murphy Rebel is a two- or three-seat, strut braced, high wing, taildragger monoplane which is sold in kit form by Murphy Aircraft in Chilliwack, British Columbia, Canada.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.
The Glasair Sportsman 2+2 is a single-engine, high wing, strut-braced, four seat kit aircraft, developed by the Glasair Aviation company.
The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The Precision Tech Fergy F-II B is a two-seat side-by-side, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The TeST TST-3 Alpin T is a Czech shoulder-wing, T-tailed, single-seat glider and motor glider that was designed and produced by TeST of Brno.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The Partenair Mystere is a Canadian two-seat, pusher configuration monoplane that was designed by Partenair Design of Saint-Jean-sur-Richelieu, Quebec and intended for amateur construction from kits.
The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.
The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.
The Just SuperSTOL is an American STOL amateur-built aircraft, designed and produced by Just Aircraft of Walhalla, South Carolina. The aircraft is supplied as a kit for amateur construction.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
Media related to Glasair GlaStar at Wikimedia Commons