Goniophotometer

Last updated
Manual (1), and Mitscherlich's optical (2) goniometers for use in crystallography, c. 1900 Goniometr-1900.png
Manual (1), and Mitscherlich's optical (2) goniometers for use in crystallography, c. 1900

A goniophotometer is a photometer for measuring the directional light distribution characteristics of light sources, luminaires, optical media, and surfaces. [1] [2] A goniophotometer typically incorporates a goniometer that measures direction using spherical coordinates to capture the angular distribution of the transmitted, emitted, or reflected light. [3] A gonioradiometer differs only in that it is a radiometer (i.e., is not specific to human vision), rather than a photometer. [4]

Contents

The directional distribution of light is of high importance to architectural lighting, automotive lighting, and other applications. A goniophotometer enables characterization of emitted light that is not isotropic.

Uses

Polar plot of the luminous intensity distribution for a luminaire with Lambertian downlight (80%) and uplight (20%) Lambertian-intensity-80-20-v0.png
Polar plot of the luminous intensity distribution for a luminaire with Lambertian downlight (80%) and uplight (20%)

A goniophotometer can be used for various applications:

Equipped with color sensors additional characteristics can be measured

Types

The goniophotometer types A, B, and C defined here are derived from publication CIE 070-1987 of the International Commission on Illumination. [5] Use of goniophometers is further detailed in CIE 084-1989 and CIE 121-1996. [6] [7] The Illuminating Engineering Society offers similar definitions and guidance in ANSI/IES LM-75-19. [8]

Type A

Fixed horizontal axis, with the vertical axis attached, both perpendicular to the main output direction of the light source

Type B

Fixed vertical axis, with the horizontal axis attached, both perpendicular to the main output direction of the light source

Type A and B are Double columns structure. This type is applied to fixed the grille lamp. The symmetry axis of lamp and the horizontal of rotating supporter is coaxial, in the B-βcoordinate system, and the two is vertical Cross, in the A-αcoordinate system.

Type C

Fixed vertical axis perpendicular to the line of measurement, with a horizontal axis parallel to the main output direction of the light source

Type C are single column structures. The single column structure is created when the assistant column is taken down from double columns structure. This type is applied to a fixed tube lamp, spot lamp, or other devices. [9] The axis radiation of lamp and the horizontal of rotating supporter is coaxial.

Camera-based goniophotometers

Luminous intensity distributions can also be measured using imaging goniophotometers. [10] In order to measure the full angular distribution of a light source, the fisheye camera method can be used. The method is based on employing a fisheye-lens camera installed into a port of an integrating sphere. The camera simultaneously records the luminous intensity data for all angles of light emission, reducing the measurement uncertainty due to temporal effects, such as drift and temporal modulation of the light source. The instantaneous nature of the camera measurement also significantly reduces the time required to obtain the luminous intensity distribution of the device under test, and is not affected by the angular resolution set for the measurement.

See also

References

  1. ↑ CIE (2020). e-ILV, online version of CIE S 017:2020, International Lighting Vocabulary (2 ed.). Vienna: International Commission on Illumination. §17-25-026, goniophotometer. Retrieved 19 Dec 2025.
  2. ↑ IES (2022). ANSI/IES LS-1-22, Lighting Science: Nomenclature And Definitions For Illuminating Engineering. New York: Illuminating Engineering Society. §8.4.1.5, goniophotometer. Retrieved 19 Dec 2025.
  3. ↑ "Practical Estimation of Measurement Times in Goniospectroradiometry and Goniophotometry". LED-Professional.com. 12 Mar 2015. Retrieved 19 Dec 2025.
  4. ↑ Zhang, John; Levin, Robert; Angelo, Robert; Vincent, Richard; Brickner, Philip; Ngai, Peter; Nardell, Edward A. (2012). "A Radiometry Protocol for UVGI Fixtures Using a Moving-Mirror Type Gonioradiometer". Journal of Occupational and Environmental Hygiene. 9 (3): 140–141. doi:10.1080/15459624.2011.648569.
  5. ↑ "CIE 070-1987, The Measurement of Absolute Luminous Intensity Distributions". cie.co.at. Vienna: International Commission on Illumination. 1987. ISBN   9783900734053.
  6. ↑ "CIE 084-1989, Measurement of Luminous Flux". cie.co.at. Vienna: International Commission on Illumination. 1989. ISBN   9783900734213.
  7. ↑ "CIE 121-1996, The Photometry & Goniophotometry of Luminaires". cie.co.at. Vienna: International Commission on Illumination. 1996. ISBN   9783900734749.
  8. ↑ "ANSI/IES LM-75-19, Approved Method: Guide to Goniometer Measurements and Types, and Photometric Coordinate Systems". ies.org. New York: International Commission on Illumination. 2019.
  9. ↑ "LM-79 Moving Detector Type C Goniophotometer - LISUN". www.lisungroup.com.
  10. ↑ "US Patent for Differential goniophotometer Patent (Patent # 9,958,317 issued May 1, 2018) - Justia Patents Search". patents.justia.com. Retrieved 2023-05-17.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.